Availability
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
—
$1,599.99
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 129 )
$1,671.99
Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit
Not Yet Reviewed
$4,299.99
—
$4,499.99
Artec Industries Ford 60 front hydro ram mount and axle trusses deliver strength and protection. One of the most vital and expensive components of your vehicle is your steering. These unique Artec trusses place your ram in its most affective and strongest location--close to the axle centerline--and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end on the axle tube, providing not only a location for mounting your 3 and 4-links, but they also create true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Ford 60 front hydro ram mount and axle trusses. Other features: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which also further protects your ram from trail damage * Ram mount and gussets feature drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow for easy removal of gears. Skid plate is bolted using included countersunk bolts, which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Includes additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$709.99
—
$749.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Alloy USA chromoly front axle shaft kits use high-tensile strength 4340 chromoly that is heat-treated twice, making them up to 30 percent stronger than stock. Keep your truck going on the trail, rocks, or mud with Alloy USA front axles.
( 4 )
$592.99
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$379.99
Artec Industries Dodge 60 front hydro ram mount and axle trusses deliver strength and protection. One of the most vital and expensive components of your vehicle is your steering. These unique Artec trusses place your ram in its most affective and strongest location--close to the axle centerline--and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end on the axle tube, providing not only a location for mounting your 3 and 4-links, but they also create true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Dodge 60 front hydro ram mount and axle trusses. Other features include: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which also further protects your ram from trail damage * Ram mount and gussets feature drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow for easy removal of gears. Skid plate is bolted using included countersunk bolts, which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$749.99
Artec Industries Chevy 60 front hydro ram mount and axle trusses deliver strength and protection. Some of the most vital and expensive components involve your steering. These unique Artec trusses place your ram in its strongest and most affective location—close to the axle centerline—and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end of the axle tube, providing not only a location for mounting your 3 and 4 links, but also creating true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Chevy 60 front hydro ram mount and axle trusses. Other features: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which further protects your ram from trail damage * Ram mount and gussets include drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow easy removal of gears. Skid plate is bolted using included countersunk bolts—which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Includes additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$699.99
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
( 1 )
$1,499.95
—
$4,195.95
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$690.99
—
$2,197.99
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$654.99
—
$1,715.99
RCV Ultimate IFS CV axles for independent front suspension are designed to overcome the limitations of your axle shafts. They provide increased strength that original equipment axle shafts just can't match--even if you have big tires and big power, there are no worries. Ultimate IFS CV axles are low maintenance, and they meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness, and control of your IFS. Equip your vehicle with RCV race-proven materials and design, so you can "Put the power down with confidence!" Select the Ultimate IFS axle set designed for your vehicle.
( 1 )
$2,299.95
—
$2,999.95
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,100.00
—
$6,100.00
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 319 )
$318.99
—
$3,629.99
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,979.99
USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.
( 3 )
$542.99
—
$1,473.99
An upgrade that gets you more mileage per gallon and hubs that are easier to service, Yukon Gear & Axle spin free locking hub conversion kits are an enhancement anyone would want on their 4WD vehicle. Whether you service your vehicle yourself or you have a trusted mechanic, you don't usually like to keep difficult or expensive-to-fix things on your ride. These kits are not only easier to service, they help reduce wear and tear on your drivetrain components. They allow your front axle and drivetrain to disengage when in 2WD, preventing premature wear and improving fuel economy. Yukon Gear & Axle kits are available for various makes and models from the 1980s and up. Features include: * Reduced drag, resulting in greater fuel economy * Replaces vulnerable and expensive factory unit bearing * Kit includes heavy-duty 4340 chrome-moly outer axles * Premium hubs allow driver selectability * Complete kits contain all necessary components
( 11 )
$2,557.99
—
$3,613.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$5,300.00
—
$7,750.00
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$3,599.99
—
$5,429.99
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Your best alternative to bench rebuilding is one of these ATP fully remanufactured differential assemblies. For GM vehicles with 8.25 front axles, for instance, new units are no longer available from GM—so ATP delivers a genuine solution. These no-core systems also relieve you of the inconvenience of returning the old part. They're available for either automatic or manual transmission applications.
( 2 )
$1,778.99
—
$1,799.99
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$425.99
—
$2,710.99
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$3,796.99
—
$5,229.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
