Filters
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,100.00
—
$6,100.00
Spicer Drivetrain Ultimate Dana 60 axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,979.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$5,300.00
—
$7,750.00
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,169.99
—
$5,229.99
Spicer Driveline Ultimate Dana 44 AdvanTEK axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$5,100.00
—
$5,300.00
TeraFlex Tera60 HD axle assemblies are perfect for replacing bent, broken or damaged axles in Jeep vehicles including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas, and are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options and carriers, and will accommodate 0 to 6 in. of lift. Teraflex Tera60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$9,197.99
—
$11,544.99
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$5,548.99
—
$6,462.99
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$5,014.99
—
$5,330.99
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$5,457.06
—
$7,898.94
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$8,617.14
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$8,617.14
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$5,429.99
TeraFlex CRD60 HD axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles, including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas. Tera's exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments, and is compatible with all super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options, carriers, and will accommodate 0 to 6 in. of lift. TeraFlex full-float CRD60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$6,688.99
—
$8,661.99
RCV Performance custom Big Bell CV axles are the ultimate solution designed to fit 2005+ Ford F450 and F550 Super Duty applications, as well as big knuckles like the Reid Super Kingpin knuckles for Ford Super-60 unit bearings. The Big Bell CVs are RCV's 2.5 ton Rockwell CVs, but the outer stub is designed to fit directly to the large 32-spline 2005+ Ford Dana 60 "Super-60" unit bearing. This eliminates the need for a lock-out or drive flange, increasing strength and reliability. These kits are designed for custom axles. The Big Bell CV is able to accept a 40 or 47 spline inner axle.
Not Yet Reviewed
$5,995.00
These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.
Not Yet Reviewed
$5,314.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
