Availability
Showing In Stock Items. Show All 16 Items.
On Sale
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
$1,019.99
On Sale
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
$1,019.99
On Sale
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$999.99
$849.99
On Sale
The torque converter is the heart of an automatic transmission. We've combined reliable, name-brand components in these Summit Racing™ torque converter upgrade Pro Packs to provide greater durability. They include a new torque converter and are available with or without a flexplate. All Summit Racing™ torque converter upgrade Pro Packs include mounting hardware and can be installed easily without any modifications.
Not Yet Reviewed
$874.70
$846.40
—
$858.40
On Sale
Looking for an edge at the drag strip? Then order a Summit Racing™ automatic transmission electric shifter Pro Pack. Kits include a Hurst Quarterstick shifter, a shifter cover, an electric solenoid, and a mounting bracket. Just add an rpm-activated switch (sold separately)—and you'll have a leg up on the competition, round after round. Order the Pro Pack designed for your transmission application.
Not Yet Reviewed
$1,018.85
$915.95
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$1,204.00
—
$1,242.00
$1,040.20
—
$1,073.10
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$899.95
$808.95
On Sale
Trail-Gear dual transfer case adapters enable you to install a Mini Truck Crawl Box. These reliable kits greatly increase the oil flow in and around the adapter for cooler operation, and Trail-Gear has also increased the strength of the casting by making the walls thicker. All necessary installation hardware, including nuts with factory thread lock adhesive, and instructions are included. Choose the kit made for your vehicle.
Not Yet Reviewed
$1,099.99
$934.99
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,099.95
—
$1,100.95
$988.95
—
$989.95
On Sale
B&M Pro Bandit shifters are the ultimate combination of design, function and sheer performance. Pro Bandit shifters feature narrow body construction with an easy-to-operate, gate-type mechanism for consistent shifts, round after round. CNC machined from 6061-T6 aluminum, Pro Bandit shifters are then polished and clear anodized for corrosion resistance and great looks. Other features include a reverse lockout that meets both NHRA and IHRA requirements, a built in neutral safety switch, and a rear exit shifter cable.
Not Yet Reviewed
$899.95
$808.95
On Sale
Holley LS clutch installation kits include all the hardware and components needed for a complete clutch install on a 6-bolt crank LS engine using a T-56 transmission. A 12 in. organic disc with a 6-spring helix sprung hub provides the superior grip needed for the strip, while the matched diaphragm-style pressure plate provides a pedal feel comfortable enough for the street. This provides 30 percent more clamping pressure and transmits that through a billet steel flywheel. Features: * 12 in. organic single disc clutch with 1 1/8 in. 26-spline hub for LS engines with 6-bolt crankshaft * 6-bolt billet steel flywheel provides strength and a fresh, new foundation for the clutch * Street/Strip clutch kit provides excellent holding strength with a smooth daily driver pedal feel * Designed for power levels up to 550 hp naturally aspirated Please note: Hydraulic release bearing to transmission bolts are not included.
Not Yet Reviewed
$1,249.95
$812.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
