Availability
Showing In Stock Items. Show All 14 Items.
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,395.00
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 68 )
$2,090.99
—
$5,455.99
B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.
( 13 )
$3,749.95
—
$4,049.95
Redesigned and strengthened, Reid Racing Super Hydra 400 transmission cases address weaknesses and add features that improve every aspect of the Turbo 400. They build their Super Hydra 400 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission! A direct replacement for the GM case, Reid cases use an incredibly expensive permanent mold casting technique to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. Super Hydra 400s are massively tough, ductile, and leak-free—with the strength to handle rock crawling, as well as desert or short-course truck racing. Their modular, 2-piece design allows them to be used with all popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super Hydra 400 transmission cases are offered in drag/street and off-road versions, each with features geared specifically for those applications. Features: * Speedometer and governor provisions * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Additional dipstick hole on driver side * Multiple external pressure taps allow for monitoring of circuit pressures * Accept all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers Off-road also includes: * Pre-machined side oil feed feature for 4L80-E center support * Front band anchor tapped for custom ARP anchor bolt (supplied) * Pre-machined bosses for input and output speed sensors * Un-machined speedometer boss for maximized 4x4 transfer case load support * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters * Available with a 4L80-E size pressure plate
( 4 )
$2,149.00
—
$2,283.00
Redesigned and strengthened, Reid Racing Super 80 transmission cases address weaknesses and add features that improve every aspect of the 4L80e. They build the Super 80 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission. Reid Super 80 cases are massively tough, ductile, and leak-free with the strength to handle turbocharged muscle cars, drag cars, rock crawling, and desert truck racing. Their modular, 2-piece design allows them to be used with popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super 80 transmission cases are SFI 4.1 certified without requiring any external shields. Features: * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Heli-coiled bellhousing and oil pump threads * Front band anchor tapped for custom ARP anchor bolt (supplied) * Input and output speed sensors--bosses are dual machined to accept freeze plugs * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters
( 2 )
$2,318.00
Summit Bucks
Sonnax Smart-Tech drum modules for racing GM TH400 transmissions improve on-track performance and consistency, leading to quicker ETs, more wins, and greater reliability. The TH400 is preferred for its overall durability and multitude of available ratios, but is known to be heavier and less efficient than the popular two-speed Powerglide. Part of the TH400 inefficiency results from the fact that the direct drum counter-rotates, spinning backwards in 1st gear, brakes to a complete stop on the 1-2 shift, then goes from 0 RPM to input RPM on the 2-3 shift. Significant energy is wasted through this cycle that robs power, upsets traction on the shifts, and contributes to broken internal parts. Compared to aluminum direct drums, the Smart-Tech drum module reduces the weight of the counter-rotating components by over 3.3 lbs.! And more significantly, because the weight of the Sonnax counter-rotating parts is closer to the centerline, there's a 68 percent reduction in energy required to stop and restart during the 1-2 and 2-3 shifts. The benefits are increased wheel horsepower, better acceleration, less shock on the shifts, and improved durability. * Complete kit (34555-01K) replaces both forward and direct drums and includes everything from intermediate sprag to the pump; a selection of Sonnax input shafts is available separately. * 100 percent new content, no used core pieces * Includes larger-diameter, 36-element sprag and sprag race that works with OE intermediate clutches * Includes six-friction forward clutch pack and seven-friction direct clutch pack Contents: * Forward Piston Housing * Forward Piston * Forward Piston Return Springs (16) * Forward Spring Retainer * Forward Snap Ring * O-Ring 1.674 in. * Lip Seals (2) * Direct Housing Assembly * Direct Piston * Direct Piston Return Springs (26) * Direct Spring Retainer * Direct Snap Ring * O-Ring 2.737 in. * Sprag Shaft * Front Sprag Retainer Plate * Heavy-Duty Sprag 36 Element * Outer Sprag Race * Rear Sprag Retainer Plate * Sprag Retainer Screws (4) 6-32 x 5/16 in. * Quad Ring Seals (2) * Anti-rotation Seal Rings (2) * Drum * Pressure Plate * Outer Snap Rings (4) * Bearing Small * Forward Clutch Hub * Bearing Large * Direct Clutch Hub * Steel Clutch Plates (4) .060 in. * Steel Clutch Plates (11) .077 in. * Friction Clutch Plates (13) .080 in. * Clutch Separators (60) .103 in.
Not Yet Reviewed
$3,052.40
RevMax offers Stage 5 Billet Quad Clutch Insignia Converters for a variety of applications, including many Ford trucks from 2011 and up. These torque converters are designed for those who have heavily modified engines or for those who tow heavy weights. They're the culmination of over two years R&D. Each converter features four lockup clutches and retains the factory damper assembly to provide extremely smooth converter apply. Even with twice the holding capacity of a stock converter, most RevMax customers rate these quad units as smooth as their original stock dual disc. RevMax Stage 5 converters have no horsepower or torque limitations. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance quad disc lockup friction * RevMax proprietary CNC-machined stator designs * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$2,195.00
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$2,508.99
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$2,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
