Availability
Spidertrax Off-Road's all-new 1480 40 spline front axle stubs are a reinvention of their already proven 35 spline stub shafts. Manufactured from billet 300M aerospace material with an integrated positive locking design—all while achieving 50 degrees of steering—they're the next best thing in stub shaft technology… and the last stub shafts you'll ever need. These 1480 40 spline stub shafts are designed to work with 60 style U-joints and Spidertrax 40 spline Ultimate Unit Bearings. * Aerospace Quality: Spidertrax follows the strictest AMS Aerospace standards for their heat treatment, complete with double tempering, snap tempering, and cryogenic treatment procedures. Parts are sampled to ensure proper grain structure is achieved up to 0.0003 in. from the surface; that's a depth 1/10 the thickness of a human hair! In summary, you're getting the best material and the best heat treatment on the market. * Locked: Turning 40 degrees is impressive, but Spidertrax axle shafts can turn 50 degrees. Engineers achieved this by positively locking the shaft to the Ultimate Unit Bearing with a billet aluminum cap and cap screw. Keeping that stub shaft tightly secured not only helps with driveline vibration, but helps with overall strength of shaft and U-joint. * 40 Splined: Each stub shaft is 40 splined—a size that makes perfect sense, especially when running properly paired inner axle shafts. When sized with the same shaft diameter as inner shafts, stub shafts end up taking the full punishment in your front-end. The stub shaft should be "stronger" than an inner axle because unlike an inner axle, stub shafts have little room to twist, making them more prone to failure. An added bonus: with many drivers running 40 splined rear Ultimate Unit Bearings, having the same unit bearing up front makes for better serviceability and part simplicity.
Not Yet Reviewed
$1,299.00
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
—
$1,599.99
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 129 )
$1,010.99
—
$1,671.99
ATI Super Pump front pumps are CNC-machined from billet aluminum or permanent-mold aluminum castings for precision and durability. Re-engineered lubrication circuits allow for increased flow volume in all critical areas. ATI increased the thickness of the pumps to improve oil pressure and volume at low rpm, resulting in a cooler-running transmission and converter. Features: * Superior pressure * Improved trans-brake hold * Prevents stator tube spinout
( 4 )
$1,092.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Alloy USA chromoly front axle shaft kits use high-tensile strength 4340 chromoly that is heat-treated twice, making them up to 30 percent stronger than stock. Keep your truck going on the trail, rocks, or mud with Alloy USA front axles.
( 4 )
$1,099.99
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
( 1 )
$1,099.95
—
$1,599.95
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$1,018.99
—
$1,647.99
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
—
$1,499.95
USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.
( 3 )
$1,000.99
—
$1,475.99
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,002.99
—
$1,526.98
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$1,050.99
—
$1,592.99
Motive Gear Ten Factory driveshafts are precision-forged for quality and performance. They come fully assembled and are designed to handle abuse, both on and off-road. Motive Gear Ten Factory driveshafts feature 4130 chromoly tubing for strength and durability, with 1310 or 1350 precision U-joints and black oxide coating. They're electronically balanced to the highest tolerances to provide a vibration-free ride. Available for front and rear, Ten Factory driveshafts include their famous, real-world 10-year warranty. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,102.97
—
$1,163.99
USA Standard Gear transfer case housings protect your transfer case. The housing is constantly exposed to the elements, and can also experience "pump rub" on the inside. These replacements are offered for a variety of transfer case models, front and rear half. USA Standard Gear housings offer great quality and value. Order the model recommended for your application.
( 4 )
$1,096.99
FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.
( 16 )
$1,059.00
—
$1,099.00
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$1,247.10
—
$1,541.45
Rugged steel driveshafts from Crown Automotive are the perfect fit for a wide range of Jeep models. Drivetrain components absorb a tremendous amount of wear and stress, as they're responsible for transmitting both torque and rotation in the drivetrain. Now you can reduce vibration from your driveline with OE-quality replacements for manual and automatic transmissions. Select the driveshaft that matches your particular year and submodel.
( 6 )
$1,058.99
—
$1,291.99
USA Standard gear axle shafts are high-quality replacements machined from steel for superior strength and performance. They're available for dozens of differential case design applications, such as AMC, Ford, GM, Chrysler, and Dana. The shafts are offered in nearly a hundred lengths and numerous wheel stud patterns. Order the model recommended for your vehicle.
( 36 )
$1,004.99
—
$1,606.99
Stock driveshafts get power to the axles, but they aren't designed for tough off-road use. Yukon Gear & Axle performance driveshafts feature stronger tubing to help prevent bending or wear that could cause the shafts to become unbalanced. They include heavy-duty hardware, transfer case yokes, and either 1310 or 1350 U-joints. For better off-road protection, upgrade to Yukon Gear & Axle performance driveshafts, available in many sizes and options for applications from 2007 and up.
( 1 )
$1,267.99
—
$1,300.99
Need a new driveshaft for your rig? OMIX-ADA has a wide variety of stock replacement driveshafts offering OE quality for your Jeep or Willys vehicles. Get back on the trail with OMIX-ADA.
( 1 )
$1,199.99
Manufacturer Rebate
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$1,026.99
—
$1,177.99
Crown Automotive ring and pinion gear and installation kit combos are complete with all the components needed to swap out your ring and pinion gears. Everything required for a gear replacement and/or upgrade is included—gaskets, seals, shims, bearings, and all necessary hardware. These convenient kits are available for a wide variety of submodels, with component ratios tailored to your specific vehicle. Crown quality combos offer great performance and the best bang for your maintenance buck!
Not Yet Reviewed
$1,022.99
—
$1,228.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
