Availability
Showing In Stock Items. Show All 22 Items.
The lower the gear, the higher the torque; you need Trail-Gear heavy-duty output shafts! These front shafts upgrade your old gear with the strength to handle lower transfer case gears and jumping on the throttle. Don't wait until you hear the popping of gears about to fail! Installation is easy--only the front output cover needs to be removed to install these TG gears. Get your rig trail ready with the addition of Trail-Gear heavy-duty output shafts!
Not Yet Reviewed
$129.99
Keep your 4WD working properly with these Standard Motor Products 4WD actuators. They are designed to be direct replacements and meet or exceed OEM specifications. They come available for a variety of applications.
( 4 )
$123.99
—
$197.99
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 62 )
$258.76
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 25 )
$125.50
—
$228.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$175.99
—
$239.99
Clearance
OMIX-ADA transfer case replacement components are manufactured by a community of enthusiasts dedicated to producing the finest in off-road solutions. OMIX-ADA products have been propelling 4WD vehicles down highways, back roads, and over the world's roughest terrain for about two decades. OMIX-ADA's team of engineers has developed, tested, and trail-ridden many of their products until they were perfected for you. So, when you're looking for transfer case replacement components, choose OMIX-ADA.
( 1 )
$109.99
—
$218.99
Prevent front driveline issues on your lifted truck with the BDS transfer case indexing ring kits. At 6 in. of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate vibrations. BDS T-case index ring kits have optimal spline engagement and are dual-drilled to allow positioning for compatibility with a range of lift heights. Rounding out each kit is a billet aluminum driveshaft spacer and all the hardware needed to complete the installation. Key features: * Indexing rings eliminate front driveline vibrations * Proper clearance prevents cross-member interference * Heavy-duty steel construction for maximum strength * Designed with optimal spline engagement to prevent transmission to transfer case damage
( 1 )
$193.95
—
$277.95
TeraFlex 2WD low-range kits let you gear down to power up. The 2Low kits are great little mods that allow low-range 2WD--imagine being able to steer in low range! You will have all of the benefits of true low-range gearing, while allowing the front to turn freely. They eliminate drivetrain bind and most of your 3-point turns. These kits are completely internal and do not require any external modifications. Make good use of your engine power with TeraFlex 2WD low range kits.
( 3 )
$115.99
USA Standard Gear transfer case housings protect your transfer case. The housing is constantly exposed to the elements, and can also experience "pump rub" on the inside. These replacements are offered for a variety of transfer case models, front and rear half. USA Standard Gear housings offer great quality and value. Order the model recommended for your application.
( 4 )
$200.99
Gain independent control of your transfer box with Advance Adapters twin-stick shifters. They provide the construction, materials, and parts you need for dependability and installation ease. Advance Adapters twin-stick shifters make transfer case shifting easier and provide other gear selections like 2WD or 4WD, high or low, and rear or front-wheel drive.
( 2 )
$201.28
OMIX-ADA twin stick transfer case shifters are designed to allow for easier transfer case shifting and other gear selection options, like 2WD low and front-wheel drive. They feature quality, durable components matched to your specific transfer case model.
( 5 )
$152.99
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$316.47
If you're looking for transfer case components like range forks, Motive Gear has what you need. They use only the highest quality materials to manufacture their equipment and have been providing aftermarket parts for over 65 years. When it comes to using transfer case components you can depend on time and time again, Motive gear has you covered.
( 17 )
$131.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "A" kits contain the parts you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "A" conversions include shift rails, fork, fork tube, and roll pins.
( 2 )
$199.99
Advance Adapters NP231 fixed yoke kits feature a new 1 3/8 in. - 32 spline rear output shaft, 356-T6 heat-treated aluminum alloy tail housing, bearings, fastening hardware, and detailed instructions. NOTE: At the time of order you have to purchase a yoke separate. Please choose one of the following: * 716295 1310 non-CV yoke * 300472 1350 non-CV yoke * Flange-style yoke are available at an additional cost
( 4 )
$241.19
On Sale
B&M extended transfer case handles allow for easy reach and operation. The extended length also provides additional leverage, which reduces the effort required to shift. They are available in 6061 T-6 billet aluminum or in heavy-duty 4340 steel. Both include black ABS shift knob and offer easy direct-fit installation. Shift in and out of gear ranges with ease using B&M extended transfer case handles. Features include: * Replacement for factory stick * Ergonomic bends for improved shifting comfort * Billet aluminum is anodized black * Heavy-duty 4340 steel has a durable black E-coat finish
( 2 )
$299.95
$194.95
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$139.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
