Availability
Showing In Stock Items. Show All 18 Items.
Install FTI Performance sun gear bushings to restore critical clearances and resist untimely wear. These automatic transmission bushings—also referred to as Powerglide wedding bands—are made of high-grade materials to provide superior wear characteristics. This helps to eliminate premature deterioration for worry-free operation.
Not Yet Reviewed
$13.39
Summit Bucks
The detent ball in the valve body in listed Chrysler automatic transmissions (see Applications tab) wears into the aluminum bore due to continuous movement and vibration of the linkage. This creates excessive looseness in the manual valve lever and allows the manual valve to move out of alignment. No start or being stuck in Park can occur from the manual valve being out of position due to extra clearance. This condition often requires that the valve body be replaced. Sonnax valve body detent ball and sleeve kits allow the valve body to be salvaged. The bore must be oversized using the self-guiding bench reamer included in Sonnax tool kit 22771-TL12. A .096 in. diameter drill bit is also included to allow the retaining pin hole to be redrilled for use with the OE pin. Sonnax detent spring 22771-36 is also available. Additional notes: * Precision steel sleeve restores worn valve body and properly supports the detent ball * Precision-ground steel ball included for optimal fit with the replacement sleeve * Self-guiding bench-style reamer allows casting to be oversized quickly and accurately without specialized equipment * Kit is designed to fit both the short and long OE detent bore designs
Not Yet Reviewed
$16.80
—
$17.65
In high performance and racing applications, it's important to avoid restriction and maintain line pressure by keeping a good supply of clean, fresh fluid to the pump. Summit™ Hi-Flow race transmission filter kits eliminate the restrictive factory-style filter element and instead use a low restriction brass screen that allows maximum flow and filtration which is the key to consistency, performance, and long life. We recommend these for all high performance applications that utilize a full-manual or trans-brake valve body.
( 9 )
$18.99
Summit Bucks
The OE pressure regulator valve design prevents adequate cooler flow at low rpm and high-pressure conditions, which can create overheating. Additionally, in 1999 and later vehicles, the factory EPC pressure was set high at idle, resulting in engine surge conditions in GM 4L80-E and 4L85-E units. Sonnax lube-regulated pressure regulator valves provide a significant increase in cooler flow under low rpm and high-pressure conditions that benefits all vehicles—and eliminates the need for reprogramming 1999 and later vehicles with high EPC pressure at idle.
( 20 )
$17.40
ATI band adjustment screw kits are made from 4140 alloy steel and include a jam nut. They are designed to keep ATI steel drum Powerglide, ProGlide, High Impact, and SuperGlide transmissions in good working order. For longevity, it is important to check and properly adjust the low gear band--especially when the transmission is new. A few minutes of maintenance will help the low gear band do its job so that your transmission can deliver performance and durability.
Not Yet Reviewed
$17.95
Pro-X Racing Parts clutch cables are high-quality products that meet or even exceed OEM quality, and are manufactured to exact OEM specifications to offer maximum performance and the perfect fit. Pro-X Racing Parts clutch cables are equipped with pre-lubricated nylon inner sleeves and tightly coiled inner casings, along with a flexible PVC outer jacket and strong steel inner cable for high durability and smooth control. They are easy to assemble thanks to the appropriate length with all necessary mounting parts supplied. Choose the clutch cables designed for your dirt bike application. Features: * Black PVC outer jacket for maximum flexibility and durability * Steel inner casing that is tightly coiled for low compression * Pre-lubricated nylon inner sleeve for smooth operation and long life * All wire ends are bird caged prior to terminal casting for superior pull-out resistance
Not Yet Reviewed
$12.99
—
$21.99
TransGo automatic transmission shift kits include the needed items to restore proper function to your valve body with much improved drivability and durability. A wonderful addition to your OEM classic vehicle. Features and benefits: * Raises overall line pressure * Calibration for a higher speed manual low * Crisp shift performance and more durability
( 5 )
$10.43
The importance of pressure plate bolts in a racing or high performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application-specific to ensure optimum grip length. These ARP Pro series bolts, originally developed for NASCAR Winston Cup competition, are stronger and are rated at 200,000 psi. They feature a large-diameter, low-profile design and come complete with washers.
( 33 )
$11.99
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$12.53
—
$19.23
Historically, the core business of LuK—an abbreviation that, in English, stands for disc and clutch makers--is clutches, their associated systems, and powertrain dampers. LuK clutch slave cylinders have a long operating life and low-friction characteristics, thanks to the special design of the central seal, with a plastic reinforcement and the use of special lubricants. LuK offers both hydraulic concentric slave cylinders fitted within the bellhousing and external slave cylinders for lever-operated throwout bearings. All automatically adjust for clutch wear.
( 57 )
$15.99
—
$17.99
Summit Bucks
The Sonnax automatic transmission reverse servo spacers provide a simple, low-cost way to add durability to the GM 4L80-E and 4L85-E transmissions and eliminates the need to retrofit early design reverse servo pistons into late units. Due to a design change in 1996, it had been found that the reverse servo piston commonly breaks because it is stressed more than early servos. Installation of Sonnax reverse servo spacers reduce piston stress by increasing the contact area between the aluminum piston and spacer and incorporating a cushion spring washer. The new contact area is over two times the original and the pressure between the piston and the spacer is reduced by 60 percent. The reverse servo spacer kits easily install during assembly and does not require machining or other modifications. Excessively high line pressure in 'Reverse' is directly related to boost valve wear and cross-leaks into the EPC oil circuit. For maximum durability, inspect and replace the boost valve with one of the Sonnax 4L80-E boost valve kits (sold separately). Product features and benefits: * Increased contact area reduces pressure between apply pin and piston by 60 percent * Added Belleville spring washer reduces shock on piston * No machining necessary, drop-in components * Maximum durability for minimal cost
Not Yet Reviewed
$12.91
Motion Pro standard black vinyl clutch cables provide smooth and precise control of your clutch. Affordable alternatives to OEM cables, these replacements are designed to meet or exceed OE quality. They feature a coil wound housing and an inner nylon sleeve for longer life and smooth operation. Motion Pro standard black vinyl clutch cables are available in a wide variety of applications.
( 7 )
$15.69
—
$19.35
HardDrive specializes in Harley-Davidson® parts and accessories including clutch hub keys for specified Big Twin and FL and FLX models. They are accurate reproductions of the OEM part and serve as quality replacement.
Not Yet Reviewed
$19.76
Dura-Bond automatic transmission bushings are available in a wide range of offerings covering the aftermarket and today's needs for improved quality and tolerances. Individual bushings and kits are available, as well as semi-finished options that allow you to machine bore for proper fit and centerline accuracy. Dura-Bond transmission bushings feature seamless construction that makes installation easy, eliminating breakage and bushing surface interruptions. * Full round Babbitt bushings: Tight tolerances, no walking, no possible split when installing, wall tolerance of .0005 and O.D. tolerance of .001 * Bronze bushings: Hard and strong, long lifespans; resist shock, impact, wear, and corrosion * Coated bushings: Retains transmission engine oil on the surface, even under extreme heat and pressure, providing secondary lubrication in the event of momentary oil starvation * Dry film lubricant coating: Provides solid lubrication of parts subject to torque or contact stresses for maximum fatigue life, improved surface properties, excellent load carrying capacity, and intermittent dry lubrication * Bushings with indents: Provide lubricant reservoirs for better oil retention that allows for excellent and prolonged service * Bushing kits are constructed with all the necessary bushings to complete a rebuild and are manufactured to precise OEM dimensions for an exact fit
( 10 )
$21.99
If your transmission isn't performing properly, then you may need one of these TransGo automatic transmission boost valves. They are available in different diameters that provide increased line pressure so that your transmission will work correctly when used under conditions other than what the factory intended. Get the correct pressure with TransGo automatic transmission boost valves and you'll increase your transmission's reliability.
( 29 )
$15.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
