Availability
Showing In Stock Items. Show All 87 Items.
Instant Rebate
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 499 )
$727.99
RCV Ultimate IFS CV axles for independent front suspension are designed to overcome the limitations of your axle shafts. They provide increased strength that original equipment axle shafts just can't match--even if you have big tires and big power, there are no worries. Ultimate IFS CV axles are low maintenance, and they meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness, and control of your IFS. Equip your vehicle with RCV race-proven materials and design, so you can "Put the power down with confidence!" Select the Ultimate IFS axle set designed for your vehicle.
( 1 )
$2,299.95
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$17.99
—
$36.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 218 )
$92.99
—
$94.99
We all respond to pressure in different ways. Dorman differential vents equalize the atmospheric pressure in your vehicle's differentials. Vents deteriorate over time and can often get clogged, requiring replacement. These Dorman vents are constructed from high-quality materials and are manufactured to strict engineering quality standards. Prevent debris from entering and causing fluid contamination, while allowing excess pressures and gases to filter out with Dorman differential vents.
( 8 )
$5.99
—
$9.99
Engineered to exacting OE specifications, Aisin free wheel hubs efficiently transfer and disconnect drivetrain power to the front wheels of part-time 4WD vehicles. Compact in design and durable enough for the toughest terrain, they are manufactured to the highest standards and are always OE-matched. Additional features of Aisin free wheel hubs include: * Withstands the same rugged terrain tests as OE hubs * Robust locking mechanism provides a reliable connection of drivetrain power to the wheels in 4WD mode * Large manual dial allows the user to effortlessly change from 2WD to 4WD and back
( 12 )
$127.99
Clearance
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$265.99
—
$472.99
Mile Marker Supreme lockout hubs offer all-metal construction. Built to exacting standards, they feature patented technology and smooth operation for the performance that you expect and need. Supreme lockouts are available for many applications, domestic and import, and come in your choice of great looking chrome or stainless steel. These hubs are made by die-casting aluminum into pre-made stainless jackets for the ultimate combination of light weight and corrosion resistance. Replace your old hubs with ones made to be abused--Mile Marker Supreme lockout hubs.
( 191 )
$184.99
Manufacturer Rebate
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 147 )
$409.99
—
$452.99
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 57 )
$17.99
—
$33.99
How many degrees of twist will your stock axles handle? Longfield axle shafts beef up your machine's rear with strong chromoly that can handle 120 degrees of twist. Big tires and low crawler gears can and do lead to broken axles. Upgrade your drivetrain with Longfield rear axle shafts. Order the model designed for your vehicle application.
( 6 )
$494.11
Rugged Ridge manual locking hubs are crafted from impact-resistant nodular iron and feature a corrosion-resistant die-cast aluminum cap. They provide better 4WD performance when locked (and improved fuel economy in 2WD when unlocked) than automatic hubs. These hubs don't have the slippage or partial engagement/disengagement issues that plague automatic hubs. They're durable, easy to install, and cost-effective! Order the pair of Rugged Ridge manual locking hubs designed to fit your application.
( 109 )
$226.99
Instant Rebate
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,521.99
—
$1,715.99
These Powertrax differential spring rebuild kits are designed to keep your locker operating smoothly. They include the necessary springs for installation. The rebuild kits are available for the Lock-Rite and No-Slip carriers.
( 29 )
$12.99
—
$19.99
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 21 )
$8.99
—
$16.99
Do you need to install new crush sleeves? Motive Gear offers differential crush sleeves for controlled preload. You can depend on their steel collars to slip in between the bearings and keep the pressure on as you tighten down the pinion nut. If you're replacing a pinion seal or setting up your differential, use Motive Gear crush sleeves for preload control.
( 12 )
$12.99
Are you setting up a rear-end? These Motive Gear differential carrier shim kits will make the job easier. They come with a variety of shims, so you're sure to find the best fit for your vehicle; plus, they're made of steel for durability. Whether you're installing a new setup or refreshing an old one, you can trust the Motive Gear differential carrier shims designed for your application to make the job a snap.
( 37 )
$26.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 142 )
$148.99
—
$541.99
Yukon Gear & Axle differential carrier cases offer the strength and quality you demand for your ride. Available for many axles and ratios, these cases are constructed from first-rate materials to strict standards, ensuring durable, reliable performance.
( 21 )
$745.99
—
$780.99
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$285.50
—
$607.99
Trail-Gear Trail-Creeper ring and pinion gears can be relied on, even over the most punishing trails. These are the same gears that have won multiple championships on the W.E. Rock circuit and have proven themselves on some of the most grueling off-road courses in the world. These gears are made from tool-grade 8620 steel and heat-treated for strength and wear resistance. The gear teeth are cut using Gleason CNC gear-cutting technology, producing an unprecedented level of accuracy and surface finish. This allows Trail Creeper gears to transmit more torque with improved fuel efficiency. The higher accuracy and surface finish also produce a quieter-running gear set, which means that they'll work great on your daily driver, too. If you're looking for a gear set that's easy on the wallet, but can handle whatever you throw at it, look to Trail-Creepers from Trail-Gear.
Not Yet Reviewed
$279.00
—
$379.00
When you need strength for your custom axle job, Yukon Gear & Axle cut-to-fit axle shafts should be your choice. Built to last, these Yukon axles are offered in hardcore 4340 chromoly and 1541H alloy steel. Built to perform, they offer more strength than stock styles and come in your choice of cut-to-fit/cut-to-length designs. Choose quality-built strength for your application with Yukon Gear & Axle cut-to-fit axle shafts.
( 33 )
$247.99
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
