Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
PLYMOUTH Transmission & Drivetrain
Hughes Performance Street Master Torque Converters
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 238 )
$625.99
—
$1,007.99
Hughes Performance XTM Heavy-Duty Towing Series Torque Converters
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$671.99
—
$787.99
Hughes Performance Pro-Street 30 Series Torque Converters
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$1,058.99
Hughes Performance Street/Strip 35 Series Torque Converters
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$1,070.99
Hughes Performance Tow Master Series Torque Converters
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$596.99
—
$786.99
Hughes Performance Street Rod Torque Converters
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$776.99
McLeod RXT Street Twin Clutch Kits
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$1,050.00
Hughes Performance Fuel Miser Torque Converters
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$626.99
—
$801.99
Moser Engineering Mopar 8 3/4 in. Housing and Axle Packages
Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket
( 2 )
$1,712.00
ATI Treemaster Torque Converters
ATI Treemaster torque converters use all-new internal components that are designed to optimize efficiency and durability for each piece. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 2 )
$1,263.99
ATI Streetmaster Torque Converters
ATI Streetmaster torque converters are commonly used to enhance bottom-end torque characteristics without sacrificing cruise efficiency. They generally provide an 800 to 1,000 rpm increase in stall speed when used with stock-type rear-end ratios and slightly modified manufactured engines.
Not Yet Reviewed
$678.99
Moser Engineering Dana 60 Housing and Axle Packages
These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.
Not Yet Reviewed
$3,316.00
TCI Competition Torque Converters
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,843.95
Strange Bolt-In S60 Rear Differential Assemblies
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,894.99
ATI Treemaster MRT Torque Converters
Quick, consistent reaction times are essential to winning races, and there's nothing better suited to the task than highly efficient ATI Treemaster MRT (Minimum Reaction Time) torque converters. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,263.99
ATI Fuel & Blown Torque Converters
Nothing is tougher on a torque converter than putting it behind a blown fuel engine. Made for supercharged engines, ATI Fuel & Blown torque converters are designed for the ultimate in high-horsepower holding for big cubic inch nitrous or supercharged engines. They feature a special 22-element sprag with double-cage construction to simultaneously control each sprag element. The sprag sits in concentric races that are heat-treated to 65 on the Rockwell C scale. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,269.99
