Availability
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 44 )
$2,895.00
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 359 )
$333.99
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 190 )
$329.95
—
$549.95
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$355.00
—
$365.00
The kingpin of Tremec's high performance lineup, the T-56 Magnum double-overdrive 6-speed manual transmission, takes the very best from Tremec's current OEM technologies and pairs it with the most popular features of the TKO 5-speed. Known in its original equipment form as the 'TR-6060', the Magnum is an aftermarket version of the same transmission found in many of today's most celebrated factory super cars. Able to withstand a massive 700 lbs.-ft. of torque while providing unbelievably crisp shifts, no other manual transmission on the planet offers as much combined strength, versatility, and general ease-of-use as the T-56 Magnum. The units are available in a variety of gear ratios for different applications. Additional details: * The aftermarket's premier double overdrive 6-speed performance manual transmission * Reasonably light at 135 lbs. dry * Multiple shifter locations and dual speedo pickups for unmatched versatility * Incredibly short, extremely low-effort shift throws, with crisp, precise engagement * Modern OE supercar technology for the ultimate pro-tourers, road-racers, and more
( 6 )
$3,545.00
Skip the clunky old mechanical linkage and install American Powertrain Hydramax hydraulic clutch release systems. They easily install in almost any rear-drive vehicle. The patent-pending adjustable master cylinder bracket allows you to mimic any original clutch rod angle, giving you a smooth, modern clutch feel without hacking up your firewall. The systems are designed to work with original and aftermarket pedals and are available for most vintage 4-speeds, along with TREMEC T5, TKO, Richmond, T56, and Magnum 6-speed transmissions. These systems come with the nickel plated firewall mount, volume-matched master cylinder, as well as a reservoir kit, lines, fittings, model-specific pedal mounting hardware, and model specific internal or external slave cylinder.
( 81 )
$639.95
—
$1,150.00
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 162 )
$275.00
—
$325.00
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$1,772.95
—
$3,489.95
If you're into aggressive street driving and occasional track driving, McLeod Street Extreme clutch kits hold up to 700 lbs.-ft. of torque with street tires and moderate engine mods. These SFI-approved packages are the perfect upgrade for high-horsepower Mustangs (and other cars) that need reliable shifting on the street and the track. They feature a dual-faced ceramic friction disc, high clamp load pressure plate, pilot tool, throwout bearing, and pressure plate bolts (where applicable). You can run your pony with complete peace of mind. Street-friendly and track-proven, a McLeod Street Extreme clutch kit is your best decision. Order the model recommended for your application.
( 48 )
$365.00
—
$425.00
Summit Racing™ OE replacement flywheels offer a great fit and an economical price. They are manufactured from ductile iron and offer original fit and function. Replace your old flywheels with Summit Racing™ OE parts.
( 67 )
$139.99
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,170.95
—
$3,478.95
TransGo's Performance shift kits give you the hard-launching, tire-blazing shifts you want, after just a few hours' work with basic hand tools. TransGo even has kits for computer-controlled, 4-speed automatics. Their performance shift kits can be installed with the transmission in the vehicle and they come with complete instructions. Some kits even include a step-by-step video to walk you through the installation process.
( 506 )
$29.57
—
$321.43
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
Using the latest technology, J.W. Performance has come up with these Ultra-Bell bellhousings. Built rugged and certified, these flexplate shields allow for special motor and transmission combinations to be easily mated together. Manufactured from one-piece cast aluminum, these Ultra-Bells are five times stronger than stock bellhousings, which makes them capable of withstanding even the most severe tire shake and can fit under most stock floorboards. Order the Ultra-Bell bellhousing designed to fit your application.
( 79 )
$469.88
—
$548.75
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 338 )
$138.95
—
$176.95
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 304 )
$293.95
—
$650.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$1,049.95
Summit Racing™ high performance automatic transmission rebuild kits feature the necessary parts to get your transmission working more efficiently than ever. Available for a variety of transmissions, the Summit Racing™ high performance automatic transmission rebuild kits are an excellent choice for increased durability and performance. Kits include: * Alto Red clutches * Kolene coated or Premium Steels * High performance band * High performance transmission filter * Bushing kit * Oil seals * Gaskets * Lip seals
( 63 )
$240.99
—
$327.99
Richmond Gear Super T-10s are 4-speed countershaft helical gear transmissions synchronized in all forward gears. First and reverse are constantly meshed to prevent gear clash. Strut-type synchronizers are provided for longer life and easier shifting. The T-10s are used in applications for performance-type automobiles and light trucks. The Richmond Super T-10 transmissions are packed with power and speed!
( 17 )
$2,452.56
—
$4,003.99
On average, transmissions last between 30,000 to 50,000 miles before requiring maintenance. When that milestone occurs, Summit Racing™ offers automatic transmission rebuild kits for more than a dozen transmission models spanning a half-century. The kits include all-new clutches, oil seals, gaskets, lip seals, and a transmission filter. These rebuild components are an economical way to restore performance. Order the kit recommended for your application.
( 33 )
$187.99
—
$237.99
You can get Summit Racing™ transmission pans in Steel or Aluminum and in plain or finned styles. They are available in Chrome, Polished, Black Powdercoated, Zinc or Copper finishes. We offer stock depth or deep pan designs and come with a drain plug.
( 313 )
$31.99
—
$180.99
If space is tight between the firewall and motor, you'll be surprised how easy it is to install Summit Racing™ braided stainless transmission dipsticks without any problems. The inner cables are clearly marked and easy to read.
( 90 )
$63.99
—
$126.99
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
For a smooth rebuild, choose FTI Performance transmission pans. These deep aluminum pans offer the capacity and correct fit for your project. They're available for several applications and include filter extension and bolts. Shift your build into high gear using FTI Performance transmission pans.
( 42 )
$105.99
—
$139.00
Modal Header