Availability
Showing In Stock Items. Show All 74 Items.
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$399.95
—
$517.95
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 160 )
$265.00
—
$455.00
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 303 )
$314.95
—
$629.95
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 227 )
$285.00
—
$495.00
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$527.95
Silver Sport manual transmission bellhousings offer aluminum construction and an ideal match for your street or strip tranny. SST bellhousings are available for popular GM, Ford, and Mopar applications, and are perfect for powertrain builds, restorations, and swaps.
( 7 )
$255.00
—
$419.50
Ford offers a variety of Ford Performance Parts flywheels and flexplates for a variety of Ford engines, ranging from the versatile small block V8 up to the mighty 460. They offer cast iron flywheels for stock applications, plus billet steel and aluminum models, many with reduced rotating mass, for street/strip and racing use. Their flywheels and flexplates are available with 157, 164, or 176 teeth ring gears to suit your application and many are SFI-approved.
( 87 )
$286.99
—
$373.99
Summit Racing™ high performance automatic transmission rebuild kits feature the necessary parts to get your transmission working more efficiently than ever. Available for a variety of transmissions, the Summit Racing™ high performance automatic transmission rebuild kits are an excellent choice for increased durability and performance. Kits include: * Alto Red clutches * Kolene coated or Premium Steels * High performance band * High performance transmission filter * Bushing kit * Oil seals * Gaskets * Lip seals
( 61 )
$290.99
—
$353.99
Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear that's pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed they're locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheels—available in nearly 200 models and options for applications from the 1940s and up.
( 32 )
$388.49
—
$519.62
RAM Muscle Car clutch kits are the perfect choice for mildly modified street cars and trucks where driveability is most important. RAM Muscle Car kits are popular for older restoration vehicles as well as late model cars and trucks with basic bolt on engine modifications such as headers and air intakes. These RAM kits offer super smooth clutch engagement and increased holding power with only a slight increase in pedal effort. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 78 )
$309.00
—
$409.00
SPEC Stage 3 clutch kits are designed for street, drag race, pulling, and autocross use. They feature a carbon semi-metallic 6-puck sprung hub disc that has been the leading puck clutch in drivability, life, and torque capacity. These units are intended for street and race cars that require an aggressive but streetable engagement and high torque capacity. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3 clutch kits: * Also available in 3-puck configuration * High-clamp pressure plate * Carbon-graphite friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 18 )
$364.33
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 368 )
$299.95
—
$389.95
If you're doing an engine or transmission swap, building a kit car or street rod, or you just need a replacement bellhousing, look no further than Ford Performance Parts bellhousings. They are cast aluminum production-style bellhousings built to Ford's specifications, ensuring you of a high-quality product that's right for the job. Some applications may require minor modifications for transmission clearance and mounting.
( 27 )
$299.99
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$449.95
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$375.95
—
$484.95
SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)
( 17 )
$404.10
—
$458.10
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$569.95
$313.95
—
$499.95
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$350.10
—
$391.50
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
Centerforce I clutch kits are designed to be high-quality, entry-level performance clutches for those in need of a superior stock replacement. Using the patented Centerforce centrifugal weights (where applicable) and premium friction materials, these Stage 1 clutch systems are perfect for applications with stock engines or mild power increases from minor bolt-on modifications.
( 31 )
$493.95
Pioneer manual transmission flywheels are a high-quality replacement part designed to restore OEM levels of performance. Each flywheel is built to the original dimensions, precision-machined, and balanced to remove runout and vibrations. Get one step closer to successful completion of your repair/rebuild with the Pioneer flywheel recommended for your application.
( 107 )
$268.99
—
$287.99
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$261.99
—
$287.99
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$556.95
If you're into aggressive street driving and occasional track driving, McLeod Street Extreme clutch kits hold up to 700 lbs.-ft. of torque with street tires and moderate engine mods. These SFI-approved packages are the perfect upgrade for high-horsepower Mustangs (and other cars) that need reliable shifting on the street and the track. They feature a dual-faced ceramic friction disc, high clamp load pressure plate, pilot tool, throwout bearing, and pressure plate bolts (where applicable). You can run your pony with complete peace of mind. Street-friendly and track-proven, a McLeod Street Extreme clutch kit is your best decision. Order the model recommended for your application.
( 48 )
$475.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
