Availability
Showing In Stock Items. Show All 117 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$999.95
$359.95
—
$898.95
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$461.95
—
$1,616.95
$415.76
—
$1,455.26
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$631.95
$538.95
—
$567.95
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$498.00
—
$1,371.00
$430.50
—
$1,184.40
On Sale
Centerforce throwout bearings are made to withstand the wear and tear that clutches go through. They are designed to provide reliable service, race after race.
( 125 )
$57.95
—
$86.95
$52.16
—
$78.26
On Sale
Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.
( 1 )
$319.95
$287.96
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$356.95
—
$1,658.95
$321.26
—
$1,493.06
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$573.95
$315.95
—
$515.95
On Sale
Centerforce pressure plate bolt kits feature premium-grade material and a black oxide finish. These bolts fit directly to the flywheel and are available in different sizes to work on a wide variety of applications.
( 10 )
$25.95
—
$35.95
$23.36
—
$32.36
On Sale
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$81.65
—
$132.95
$73.45
—
$119.65
On Sale
Centerforce Performance clutch discs will work with both Centerforce I and II pressure plates. Most of them have a carbon-composite organic friction material for longevity and drivability, as well as positive engagements and excellent heat capacity. These clutch discs are designed to withstand the loadings from high-horsepower engines, but are priced for the everyday driver as well.
( 53 )
$104.95
—
$178.95
$94.46
—
$161.06
On Sale
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$152.95
—
$335.95
$137.66
—
$302.36
On Sale
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$204.95
—
$367.95
$184.46
—
$331.16
On Sale
McLeod throwout bearings are engineered to provide dependable performance that stands up to the wear and tear placed on clutches. They are available for a variety of applications to suit your needs.
( 64 )
$51.00
$45.90
On Sale
Centerforce clutch hydraulic master and slave cylinders are of the highest quality available. In most applications the new hydraulics are a direct Original Equipment (OE) replacement, which features a wider range of travel, steel braded lines with a protective heat shield and a Jiffy-Tite dry disconnect for easy installation. Whether you're doing some tough city driving, or racing at a track event, ensure your clutch can handle the demands of your high powered vehicle by installing Centerforce clutch hydraulic master and slave cylinders for improved clutch performance.
( 1 )
$283.95
—
$440.95
$255.56
—
$396.86
On Sale
Replace your old flywheel/torque converter inspection cover with Mr. Gasket inspection covers. They are designed to fit most Chevrolet applications, these covers are made from beautifully chrome plated heavy-gauge steel. These covers are corrosion resistant and facilitate easy installation.
( 8 )
$69.35
$62.45
On Sale
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$1.99
—
$8.99
$1.79
—
$8.09
On Sale
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 61 )
$419.95
—
$608.95
$377.96
—
$548.06
On Sale
McLeod 1200 Series hydraulic throwout bearings restore firm, positive shifts. These direct-fit OE-replacement clutch slave cylinders feature a factory style wire-clip connector, and are made to the original factory specifications—with premium quality rubber components for compatibility with all DOT 3 and 4 brake fluids. Improve the shifting in your manual ride with McLeod 1200 Series hydraulic throwout bearings. Order the model designed for your vehicle application.
( 14 )
$279.00
$251.10
On Sale
A quality pan is essential for the performance of any automatic transmission. They serve as a reservoir for your fluid, which provides lubrication, cooling, and transmission fluid pressure. Crown Automotive offers a line of replacement automatic transmission pans built to withstand the rigors of many Jeep and Mopar vehicles. The steel pans have a protective black finish, and they are available in basic stock applications, or in deep pan style kits with additional components. Don't let old or leaky fluid pans lead to erratic shifting and decrease the lifespan of your automatic transmission.
( 4 )
$36.99
—
$104.99
$33.29
—
$94.49
On Sale
Crown Automotive clutch master cylinder and slave cylinder kits are OE-style hydraulic assemblies and direct-fit replacements. When they become damaged and leak hydraulic fluid, draw air, or fail to maintain adequate pressure, the cylinders will fail to disengage the clutch. Crown Automotive has the components you need to restore optimum clutch-releasing functionality.
( 9 )
$123.99
—
$234.99
$111.59
—
$211.49
On Sale
Are you getting ready for a manual transmission rebuild? Start with one of these comprehensive service kits from Crown Automotive. They supply the bearings, seals, gaskets, rings, and small parts (contents will depend on the application chosen) needed to successfully overhaul your transmission. Preventative maintenance is worth the time spent—and helps to provide reliable long-term performance. Choose the quality of Crown Automotive manual transmission master overhaul kits to get the most from your work.
( 25 )
$22.99
—
$487.99
$20.69
—
$439.19
On Sale
B&M high-flow transmission filters are designed to help protect your transmission component, by removing unwanted particles from your automatic transmission fluid--and that's a good thing!
( 14 )
$31.92
$28.73
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
