Availability
Showing In Stock Items. Show All 30 Items.
Summit Bucks
Clearance
ACDelco automatic transmission output shafts are designed to replace damaged factory units and help restore your transmission. These quality components are designed, engineered, and tested to rigorous standards, and backed by General Motors. GM Genuine Parts are the true OE parts installed during production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$113.99
$58.50
Clearance
Chevrolet Performance offers replacement slip yokes for a wide range of car and truck applications, from the 1980s and up. These genuine OE-style parts are machined from top-quality materials and built to last. A key component of your driveshaft assembly, the slip yokes deliver the fit and performance you would expect from the originals.
( 1 )
$74.99
$50.50
Clearance
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$118.99
$96.50
Summit Bucks
Clearance
ACDelco GM Genuine Parts wheel bearing and hub assemblies support the vehicle while allowing the wheel to rotate. They are a GM recommended replacement for your vehicle's original component. These GM Genuine Parts wheel bearing and hub assemblies have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 14 )
$83.99
$58.50
Clearance
Spicer end yokes help to minimize noise and vibration to keep your driveline running smoothly. They're forged from hardened steel, heat-treated to endure tough conditions, and engineered for a precise fit. Spicer end yokes deliver the same quality and reliability you expect from your original equipment parts—because they are OE parts, manufactured to the same standards and specifications as the end yokes that were installed in your vehicle from day one. Order the model designed to fit your application.
( 24 )
$240.99
$54.50
Clearance
SKF Bearings wheel bearing and hub assemblies are premium parts produced using high-quality steel and surface finishes, premium seals, factory-grade sensors, precision manufacturing techniques, and strict assembly tolerances. They're 100 percent tested to the actual OE specifications for fit, form and function. SKF bearing assemblies are easy to install, pre-adjusted, and lubricated for life. Plus, SKF offers the broadest range of hub bearings and kits in the aftermarket. SKF wheel bearing and hub assemblies provide everything you need in one box to complete your install. Depending on the model selected, your kit may include bearing and flange, axle nut, circlip, O-ring, seal, or other parts. Order the assembly designed for fitment on your vehicle application.
( 67 )
$90.99
—
$145.99
$65.50
—
$98.50
Clearance
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$121.99
$81.50
Clearance
Raybestos R-Line wheel hub assemblies are designed to OE specifications—and tested for endurance, temperature control, hydraulic and salt resistance, as well as metallurgical integrity and vibration. This ensures Raybestos R-Line assemblies deliver a long service life with consistent performance that's quiet and safe. Order the model designed for fitment on your vehicle application.
( 20 )
$81.99
—
$141.99
$60.50
—
$88.50
Clearance
Centric C-Tek standard wheel bearing and hub assemblies has the widest range of bearing and assemblies on the market for all types of vehicles for exact fit and function. With these high-quality replacement hubs, ensure your ride has OE-levels of reliability, durability, and performance. Get your vehicle back on the road with Centric C-Tek standard wheel bearing and hub assemblies.
( 6 )
$82.99
—
$159.99
$54.50
—
$97.50
On Sale
Clearance
Yukon mini spools get you locked for action without breaking the bank! These mini spools offer a low-cost option for full-time lockup. They're built from quality steel to provide 100 percent power to both tires at all times--and they're easy to install. The spools are offered in a variety of styles for nearly a dozen axle models. Get lots of traction for less cash with mini spools from Yukon Gear & Axle.
( 24 )
$287.99
$94.50
Clearance
Perfection clutch slave cylinders convert non-hydraulic pressure into hydraulic pressure, in order to move other devices located at the other end of the hydraulic system. These assemblies are engineered for faster installation than original equipment, using existing lines and no special tools. OEM plastic cylinders are prone to cracking, but Perfection cylinders are made from solid blocks, bored and honed for accurate tolerances and maximum durability. Hundreds of models are available for applications from 1957 and up—including Ford, Chevy, GMC, Mazda, Pontiac, Nissan, Toyota, and other brands. Choose the configuration and cylinder options recommended for your vehicle.
( 4 )
$114.99
—
$223.99
$59.50
—
$93.50
Clearance
Lingenfelter Performance Engineering clutch actuator spacers are designed to prevent the clutch actuator from hitting the bottom of your carburetor bowl. They will allow for the use of an LS dual disc clutch and flywheel in your Camaro SS. The spacers are made from aluminum with a tough black powdercoat finish. Order the model recommended for your high performance vehicle application.
Not Yet Reviewed
$104.45
$76.50
Clearance
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$72.99
$53.50
Clearance
Replace your worn-out concentric slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The concentric slave cylinder (CSC) combines the clutch release bearing and the slave cylinder to an integrated unit. As a result, the release fork between the clutch release bearing and the slave cylinder as well as the respective bearing points are not required. Assembly takes place directly on the transmission. All Sachs concentric slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model designed for your application needs.
Not Yet Reviewed
$133.99
$68.50
Clearance
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 219 )
$69.99
—
$115.99
$51.50
—
$80.50
Clearance
Dorman transmission pans are the perfect OE replacements for those rust-prone parts. Some things just don't last forever. So, when it's time to replace your transmission pan, look to Dorman for the qualities, fit, and function you need to keep your vehicle on the road. Check and service your parts often and replace them with Dorman.
( 88 )
$70.99
$52.50
Clearance
Don't allow worn or damaged couplers on your Powertrax differential system to compromise your vehicle's performance or safety. Replace bad coupler components with new ones from Powertrax to regain optimum traction response.
( 1 )
$178.99
—
$223.99
$55.50
—
$64.50
Clearance
Motive Gear light-duty axle shafts are designed as direct replacements for OE axle shafts without modifications. They're made from quality materials and heat treated for strength and durability. The axle shafts are available for thousands of vehicles from 1965 and up. They are offered in various lengths, wheel stud patterns, and splines—for different positions and differential case design applications. Experienced installers know Motive Gear and trust them for the best quality and value in drivetrain components. Order the light-duty axle shaft model recommended for your ride.
( 38 )
$169.99
$89.50
Summit Bucks
Clearance
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 702 )
$105.99
$84.50
Summit Bucks
Clearance
ACDelco GM Genuine Parts manual transmission blocking rings are GM-recommended replacement components for your manual drivetrain. These quality OE-replacement rings provide the same fit, performance, durability, and service life you expect from General Motors. Order the ACDelco GM Genuine Parts manual transmission block ring to fit your application.
Not Yet Reviewed
$89.99
$59.50
Clearance
Save time, money, and labor with Dorman shift interlock solenoids. Now you can replace just your solenoid without the expense and hassle of installing a complete shifter assembly. Features and benefits: * Restore ability to shift out or "park" when brake is depressed * Direct-fit for a trouble-free installation * Reduce repair cost--replace the part, not the assembly * Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards Let Dorman's 96 years of experience get you back on the road and save you money all at the same time!
( 1 )
$89.99
$64.50
Clearance
Dorman pre-pressed wheel hub assemblies are time-saving and cost-efficient solutions for complete hub assembly repairs. Dorman OE FIX offers one pre-assembled unit, consolidating all four components and ready for installation right out of the box—significantly cutting labor time. The dealer repair option is to purchase components separately, requiring a specialized shop press and/or labor-intensive assembly prior to installation. Dorman OE FIX is the better option. Order the model designed for your vehicle application. Dorman pre-pressed wheel hub assemblies feature: * No special shop press tool required during installation, saving one to two hours of labor * Component pieces are factory manufactured and assembled under rigorous quality control measures, delivering higher consistency to meet or exceed the application needs * Cost-savings advantage to purchasing components separately * Constructed from quality materials for high performance and durability
( 37 )
$101.99
—
$140.99
$62.50
—
$72.50
Clearance
BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.
( 10 )
$106.99
—
$182.99
$73.50
—
$95.50
Clearance
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 240 )
$156.99
$70.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
