Availability
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
The lower the gear, the higher the torque; you need Trail-Gear heavy-duty output shafts! These front shafts upgrade your old gear with the strength to handle lower transfer case gears and jumping on the throttle. Don't wait until you hear the popping of gears about to fail! Installation is easy--only the front output cover needs to be removed to install these TG gears. Get your rig trail ready with the addition of Trail-Gear heavy-duty output shafts!
Not Yet Reviewed
$129.99
Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit
Not Yet Reviewed
$4,299.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Trail-Gear unit hubs are not just another aftermarket 1-ton unit hub that's been machined down and modified from an 8-lug to a 6-lug application. No, Trail-Gear designed these units for a specific application, so the hubs will bolt right onto Dana 60 or 9 in. housings that are set up for unit hubs. They're made to accommodate a 30- or a 35-spline axle shaft and use a 1/2 in.-20 threaded wheel stud with a 6 x 5.5 in. wheel bolt pattern. These are the same unit hubs that you will see on most competition buggies. They are ultra-strong and easy to replace. Simply unbolt the old one and bolt on the new replacement hub. This is a much simpler and stronger unit then the stock spindles being replaced. All unit hubs include integrated roll pin to prevent the spindle nut from coming loose.
( 1 )
$549.99
Trail-Gear Creeper flanges offer more trail strength than your factory drive flanges. They are manufactured from hardened 4340 chromoly tool steel and feature a larger center section with more support for the splines. The kits include flanges, dust covers, cover O-rings for a waterproof seal, a drill bit, and heavy-duty studs. The additional studs share the load, preventing hub stud and bolt failures common to stock drive flanges and hubs. Get your rig trail-ready with Creeper flanges from Trail-Gear.
( 2 )
$179.99
Trail-Gear specializes in steering, suspension, driveshafts, axles, trail armor, and wheels. Their wheel bearing kits are a part of the outstanding line of off-road parts for your truck, Jeep, or SUV. Each kit services a single side and includes inner and outer bearings, hub gaskets, an inner wheel bearing seal, and a star lockwasher. Rugged terrain can be hard on your bearings; these full-service kits bring all of the necessary parts together for replacement.
( 9 )
$69.99
—
$199.99
Trail-Gear Trail Safe axle seals are most effective in keeping your machine leak-free. If you're tired of dealing with inner axle seal leaks, these TG Trail Safe seals feature an inner seal lip totally supported by a garter spring applying constant force over the full 360 degree circumference, not allowing deflection gaps. The outer seal lip acts as a secondary seal and keeps debris and other contaminants away from the inner seal lip. The outer diameter is 100 percent rubber coated so that it forms a complete static surface seal. These features result in zero leaks. Leak or no leaks, the choice is yours--make your choice Trail-Gear axle seals.
( 2 )
$29.99
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
There's nothing quite like blazin' the trails! However, if you've ever experienced breaking your manual locking hubs, don't fret—Trail-Gear offers a great fix to nix that problem with their axle drive flange kits. These components are the perfect replacement for your existing 35-spline internal locking hubs or Warn 35-spline manual locking hubs, so you can return to the fun-filled action! Trail-Gear axle drive flange kits include: * Drive flange pucks (4340 chromoly coated with black oxide) * Drive flange covers (billet aluminum and anodized black with Trail-Gear logo) * Rubber O-rings * Hardened snap rings
( 4 )
$129.99
—
$399.99
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
Trail-Gear axle flange dust caps are made from zinc-plated steel and they allow you to use aftermarket Birfields without needing to use the 1994-97 tall FJ80 drive flanges. These are direct replacements. Missing a cap? TG has replacements.
Not Yet Reviewed
$6.99
Trail-Gear axle trusses weld onto the top of your OEM or Rock Assault axle housing for extra protection against bending during competition or other extreme applications. The flat top design of Trail Gear's axle truss allows for installation of any link brackets that you wish to install. This will not only give you the peace of mind that your rear axle housing will last a lifetime, but also add a sharp, durable look to the axle housing.
( 2 )
$79.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$99.99
—
$139.99
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$2,606.75
—
$2,722.67
Trail-Gear Trail-Creeper dual transfer cases will give you ultimate gear selection and greatly increase the oil flowing in and around the adapter for cooler operation. They have increased the strength of the casting by making thicker walls and creating huge, oversized gussets. The special retainer ring securely stabilizes the main bearing to prevent bearing play, and the tight tolerances on the coupler ensure long life and prevent striped-out input gears. You won't regret this mod--it's easy to install with basic tools and mechanical abilities.
( 1 )
$3,699.99
Trail-Gear offers Trail-Creeper 2.28 crawl boxes—ready to bolt onto the front of a top shift-style, gear driven Toyota transfer case. Transfer cases are made from two basic sections, the reduction section and the 4WD section. To build a dual transfer case, two reductions boxes are bolted back-to-back with a dual case adapter. These two are then bolted to a 4WD section. Available with 21 or 23 spline input and output gears, each unit is completely rebuilt and inspected, and has a low range gear ratio of 2.28. Whether you're looking to maintain, optimize, or upgrade, choose Trail-Gear for the quality parts and kit components that you need to give you confidence while driving through even the most difficult obstacles. Important Note: Floorboard and drive shaft modifications are required for dual transfer case installation.
( 3 )
$1,299.99
Trail-Gear Trail-Creeper 4.70 single transfer cases can be installed as replacements for your stock gear-driven case or combined with crawl boxes to create dual transfer cases. TG Trail-Creepers feature a 4.70 low-range gear set in fully rebuilt and inspected cases. They have triple-drilled flanges installed on both front and rear outputs and are available with 21 or 23-spline input gear, plus a choice of shifter options. All models include Trial-Gear Trail-Safe T-case output seals installed.
( 2 )
$1,999.99
Trail-Gear axle gussets help prevent the bending of your axle housing. These housing braces weld on top of your Toyota front solid axle to provide additional strength. Beef up your front-end with Trail-Gear upper axle gussets.
( 3 )
$39.99
Trail-Gear assembled Super Finish third members are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. They include all new parts and are ready to drop into your axle with top-quality Super Finish 29-spline ring and pinion gears, and your choice of locker. The ring and pinion gears are treated with the REM Isotropic Super Finishing (ISF) process, which removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra. This means that there is less friction between the gears, reducing wear by 95 percent, and allowing the gears and bearings to run cooler and last longer. Select the ideal kit for your application. Additional features and benefits: * Fully built Super Finish 3rd members--all new parts--no used housings or internal components * 29-spline pinion spline is 7 percent larger in diameter than the 27-spline for increased strength * Available in 4.88 and 5.29 ratios for 4-cylinder, V6, and high-pinion applications * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements * Dust shield pre-installed onto flange * High-pinion sets also include a high-pinion oil slinger * V6 units feature larger OEM-style V6 gear sets with a longer pinion gear * Trail-Safe pinon seal and nut included * Flange is quadruple drilled with popular Pickup/4Runner and Tacoma patterns: -- 66mm x 66mm x 11mm (Tacoma) -- 60mm x 60mm x 10mm (Pickup/4Runner and TG heavy-duty driveline) -- 60mm x 68.3mm x 10mm -- 61.5mm x 70mm x 10mm Notes: * Requires ring and pinion setup kit to complete the installation into your existing differential housing * For Toyota 8 in. solid axles only. Will not fit 7.5 in. IFS front axles.
Not Yet Reviewed
$1,491.02
—
$2,987.69
Ever notice how the stock shift springs in your transfer case tend to give a loose, sloppy feel to the shifter? It's a problem that can also lead to the shift lever popping out of gear on the trail. For those reasons, Trail-Gear offers heavy-duty shift springs for use with any 4.70 gear set or dual adapter installation. You will need two springs for the rear transfer case and one in the front crawl box. At minimum, these springs fit all gear-driven Toyota transfer cases from 1979-95. See the difference that inexpensive heavy-duty shift springs can make in your ride.
( 1 )
$6.99
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$4,599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
