Availability
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 22 )
$45.50
—
$282.02
Sonnax slip yokes are forged, not cast, for greater strength, and they undergo a precision-machining process to guarantee exceptional balance and minimal runout. They are 100 percent leak-tested, the seal plug is O.D. ground for superior seal, and yokes are air-tested to 40 psi. Sonnax slip yokes are available in different lengths and tooth counts to fit your specific transmission application.
( 106 )
$156.02
—
$305.44
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 9 )
$99.59
—
$235.14
Sonnax premium planetary assemblies are available in various configurations to meet different build requirements. The output shaft is available in the OEM length or short length, and the billet-machined drum flange in 12-tooth or 24-tooth. They are a big step up from standard case-hardened and tempered gears. Sonnax's top-quality racing gear material (SAE9310), combined with a freeze-tempering process (-150 degrees F), results in gears with improved grain structure and stability--tougher and more resistant to wear. Sonnax premium planetary sets are fully assembled and ready to install.
Not Yet Reviewed
$669.08
—
$1,084.31
Many Sonnax clutch hubs are designed for the extra-duty requirements of drag racing with Powerglide and other GM transmissions, for instance. Machined from a high-quality medium carbon steel forging, most hubs will accept five friction discs for the added load capacity needed in high horsepower race cars. All splines and thrust surfaces are precision-machined to exacting tolerances, and the unique lube hole pattern is designed to reduce drag on the friction discs in low gear. Sonnax clutch hubs are also available with or without lightening holes to reduce rotational weight.
( 16 )
$32.24
—
$135.23
Sonnax SmartShell heavy-duty reaction shell kits prevent damage to the rear planetary assembly, as well as providing a reinforced shell. Stripped or cracked shells in GM 4L60, 4L60-E, 4L65-E and 4L70-E units are a common problem, but strengthening the shell alone does nothing to address the equally common problem of preventing thrust loads from overwhelming rear captured planetery bearings. From daily jobs to extreme builds, the Sonnax SmartShell heavy-duty reaction shell kits are the only way to prevent shell failure and protect the bearing.
( 20 )
$124.62
Sonnax universal remanufactured valve bodies have been uniquely designed to fit a variety of '99-later Chrysler applications, regardless of OE checkball or solenoid configuration. The convenience of stocking one SKU number for various applications saves time, money and interchangeability confusion. The channel casting has been resurfaced to SAE recommended flatness and surface finish. The seasoned casting warpage is now eliminated, removing cross-leaks and manufacturing burrs that resulted in clutch distress and shift complaints. A new separator plate is also installed, along with gaskets, to seal the critical surfaces between the valve body and channel casting. Heavy-duty/high performance accumulator pistons with dual-guide seals are installed to prevent piston-to-bore scuffing and restore clutch pressures due to leakage. Patented Sonnax valves are installed to restore hydraulic pressures and eliminate shift complaints, trouble codes, converter concerns and overdrive clutch distress. Their patented accumulator cover plate—made from stronger, thicker material and secured with additional screws—is also installed to prevent flexing or breakage. To guarantee the highest level of operational performance, these remanufactured valve bodies are tested on state-of-the art equipment to verify that pressures match OE specification. Product notes: * One SKU fits all applications, saving time, money and confusion * Resurfaced OE channel casting eliminates warpage, burrs, and cross-leaks cost effectively * New separator plate and gaskets provide critical seal between cast surfaces * Patented Sonnax valves and pistons restore hydraulic integrity of circuits to eliminate shift complaints and clutch distress * Patented Sonnax accumulator cover plate stronger than OE to prevent flexing and breaking
( 1 )
$610.92
Sonnax input carrier kits transform OE wide-ratio automatic transmissions into a close ratio for game-changing acceleration on the track. Manufactured and engineered for outstanding durability, these kits keep your engine in the optimal power band, while allowing a longer pull in first and second gears, improving consistency and performance. The input carrier gears are precision-ground to OE standards and feature thrust washers with a highly wear-resistant, PTFE-coated material, plus a thicker captured bearing. Lube channels direct oil to the pinion pins, and the carrier can be disassembled for inspection and service. Stay in the power band with Sonnax input carrier kits.
( 3 )
$855.99
No weak link! Sonnax heavy-duty one-piece input shafts are custom-forged from one solid piece of ultra-high-strength 300M steel. Much better than the weak OE 2-piece shaft/hub design, this single piece delivers a more robust build that will work hard longer. With durability and performance features which are second to none; your only choice should be Sonnax heavy-duty one-piece input shafts.
Not Yet Reviewed
$440.14
—
$984.25
Sonnax shift improver performance packs combine innovative heavy-duty performance calibration for firmer shifts under load without sacrificing low-speed drivability. The precision components in these kits upgrade your transmission for maximum achievement and durability by recalibrating pressures, recalibrating shift accumulation, and including improved parts for areas that commonly wear. They are suitable for any heavy-duty application and are a critical foundation for other upgrades when modifying the transmission for high performance use. Sonnax shift improver performance packs additional facts and features: * Shorter shifts, which get progressively firmer with load * Faster pressure increase and higher overall pressure for greater clutch/band holding power * Three ultra-reliable, patented, billet pinless accumulator pistons * Unique 1-2 accumulator spring combination for shifts with character * Improved high rpm pressure * Third accumulator valve gets the 2-3 right the first time, every time * Consistent results, no guessing on calibration * Prevents worn accumulators and separator plate * Optional TCC on-off conversion prevents excess TCC pressure
( 6 )
$166.28
—
$356.54
No one knows transmissions like Sonnax, which is why their primary and secondary pressure sensors work exactly like your OEM parts. Gearbox pressure sensors determine the hydraulic oil pressure in various applications and help to specify the shifting pressure more accurately. This type of sensor may fail to function under hostile conditions or simply wear over time. When that happens, help keep your drivetrain running optimally with the Sonnax primary and secondary pressure sensors designed for your application.
( 1 )
$93.90
If you're looking for an easy upgrade to your automatic transmission, Sonnax Servo piston kits may be the answer. The improvement in shift quality is an immediate and noticeable value. These direct replacement kits will help to eliminate a bit of a "sloppy" gear performance caused by faulty OEM servo units. With all necessary rings and seals to prevent leakage and handle higher pressure, Sonnax servo pistons can be your link to greater band apply force. Choose the kit that matches your vehicle specs, then expect faster and firmer shifts!
( 29 )
$15.14
—
$352.46
Sonnax heavy-duty remanufactured valve bodies are built to overcome chronic shift and converter clutch apply complaints. It provides firmer shifts and a moderately increased pressure curve to improve performance, especially in truck and towing applications. Numerous Sonnax valve upgrades are included to restore hydraulic clearances that lead to shift complaints, clutch distress, converter complaints and codes, solenoid issues and pressure problems. Line pressure rise has been moderately increased to overcome shift complaints, delayed engagements, and to increase holding power to the clutches. To guarantee the highest level of operational performance, this remanufactured valve body is tested on state-of-the art equipment to verify that solenoid feed, clutch, converter, and line pressures match or exceed OE specifications. Choose your preferred kit packaged for your transmission. The valve body includes the following: * Oversized TCC regulator valve and sleeve, and limit valve spring for firmer TCC application * O-ringed bore plugs and abuse plugs * New accumulator control valve and sleeve with spring * Oversized AFL line up * New forward accumulator piston and seal * New pressure switch manifold * New EPC solenoid * New TCC PWM solenoid Kit contents: * Remanufactured valve body * Separator plate * Upper case gasket plate * Lower valve body gasket plate * 1-2, 3-4 accumulator springs * EPC solenoid harness adapter for 2003 to later units * Sonnax line pressure booster kit
( 2 )
$372.32
—
$582.46
Sonnax Smart-Tech overrun clutch valve kits offer a hydraulic solution to this known mechanical problem. With unique rerouting of hydraulic fluid pressure, this patented kit keeps the overrun clutch applied at all times—except overdrive 4th gear—reinforcing the roller clutch to adequately support heavy loads. Order the model recommended for your transmission application.
( 1 )
$178.60
Sonnax 10-clutch drum kits are optimized for Powerglide performance applications. Using the patented Sonnax 10-clutch drum system, the drum and piston accept 10 frictions and 10 Kolene steels, increasing lockup surface to allow significantly more torque than modified OE drums. The drum features a piston bore that is .060 in. deeper for greater piston travel. Kits include: * Complete 10-clutch drum kit with all related parts, including installed PTFE-coated bushing * Includes ten .060 in. frictions and ten .060 in. thick, 12-tooth Kolene steels * Excess material removed from high-strength, cast steel drum to reduce rotating mass * 6061 forged aluminum piston will not crack at high operating pressure like cast pistons * Forged chromoly steel clutch hub with lightening holes
( 1 )
$490.36
A bad governor will result in a sudden loss of upshift. Sonnax automatic transmission governors will restore proper function on select automatic transmissions. Their governor gears are excellent replacement components and they are made of premium materials to provide a precise fit with OE quality and function for long-lasting performance.
( 20 )
$145.67
—
$170.21
Sonnax automatic transmission case bushings are made to locate the carrier output shaft assembly. These bushings are a direct OE replacement. Sonnax automatic transmission case bushings are made from high-quality materials and is a required part in any high-quality rebuild.
( 14 )
$4.44
—
$58.94
Sonnax Super-Hold servo kits offer increased apply area over the OEM servo for more holding force between shifts. They are manufactured from anodized aluminum and include mounting seals and hardware for your specific transmission model. Their improved seal design will conserve pump volume.
( 25 )
$91.85
—
$292.41
The ideal upgrade for performance vehicles with the GM 6L80 or 6L90 transmission, Sonnax extreme-duty 4-5-6 clutch hub and intermediate shaft guarantees maximum protection against shaft breakage. The unique hub design improves oil flow and accepts Powerglide-style frictions to optimize clutch durability. In place of the 2-piece shaft/hub, Sonnax uses a much stronger, one-piece design that eliminates the OE assembly's weak, welded connection. It is custom forged from ultra-high-strength 300M billet steel, and then heat-treated and shot-peened for added durability. This combination of features guards against broken 4-5-6 hubs and the risk of rear splines shearing off.
Not Yet Reviewed
$1,015.08
—
$1,157.55
Sonnax heavy-duty reaction shaft kits are universal to fit all years and all input carriers. Reaction shafts used in high-torque applications, and especially in heavy vehicles, suffer from two common issues that require replacement. The splines that engage the rear planet can twist and the splines that engage the ring gear wear. OE and other aftermarket versions are made from lower strength, plain carbon steel. Sonnax heavy-duty reaction shaft kits are made from high-strength chromoly steel alloy to eliminate spline twist and spline wear. Contents include: * Reaction shaft with bushings * Reaction shaft-to-shell bearing * Reaction shaft-to-front carrier bearing * Shim
( 4 )
$217.22
Failure of the intermediate stub shaft and direct drum are almost inevitable when transmissions are pushed to the limit. To maximize durability and improve clutch capacity in heavy-duty/performance vehicles, Sonnax offers Smart-Tech direct clutch drum and shaft kits, the first upgrade to eliminate every critical weakness. Most failures in these units occur where the direct drum and stub shaft connect. Even other aftermarket upgrades that rely on a heavy-duty shaft will sheer in this area under extreme conditions. Unlike two-piece assemblies, the all-in-one Smart-Tech easily handles the highest horsepower/torque levels. The unique one-piece clutch drum with integrated stub shaft is precision machined from high-strength steel to guarantee there are no splines to strip from the drum or weaken the shaft. The shaft itself is significantly thicker and 2 times stronger than the original. Due to its larger diameter, the integrated shaft must be used with the kit's custom, heavy-duty sun gear. Insufficient holding power is another area where many transmissions fall short, but installing thinner aftermarket steels and backing plates to increase clutch capacity isn't ideal. Those components increase clutch pack flex and heat build-up, making them the primary cause of repeat burn-up. To improve both performance and long-term reliability, the Smart-Tech's custom drum and piston hold an OE backing plate and seven OE frictions for 17 percent more clutch capacity than the six-friction stack-up. Sonnax Smart-Tech direct clutch drum and shaft kits feature: * One-piece design that eliminates weak point where drum splines strip and shafts break * Rugged shaft is 50 percent thicker and twice as strong as OE * Custom drum and piston deliver 17 percent more clutch capacity with optimum protection against burn-up * High-strength drum and shaft are precision-machined from hardened 8620 steel * Unique sun gear is precision-machined from 9310, heat-treated steel
( 1 )
$754.00
—
$770.64
Sonnax clutch apply piston kits drastically reduce the likelihood of clutch plate distortion. Due to OE design shortcomings, flexing and bowing of the backing plate is common in some GM transmissions, often causing them to suffer failure of the 4-5-6 clutch assembly. These kits increase the piston-to-plate apply ring surface area to strengthen and reinforce the assembly, along with a more rigid backing plate design that outperforms OE and aftermarket components. Sonnax clutch apply piston kits easily tackle these common weaknesses. Kits include: * Apply piston * Apply ring * Piston dam * Backing plate
( 4 )
$162.50
—
$228.71
Sonnax heavy-duty automatic transmission output shafts allow energy to be absorbed via their torsional design, reducing peak power loads to critical areas. This, in turn, prevents shaft failure common in certain GM units. These steel output shafts are precision engineered and manufactured for unbeatable performance in high-horsepower street and strip builds. They're available in various lengths, and feature many unique refinements available only from Sonnax.
( 2 )
$710.03
—
$774.01
Sonnax Mustang flanged yokes are for the builders of Mustang driveshafts who want to upgrade from a 1330 U-joint. Those builders have long had to make due with purchasing an extra adapter flange to allow installation of a 1350 flange yoke. Now, with Sonnax flange yokes, the days of sourcing an extra adapter are over. Sonnax yokes are forged and precision-machined to accept a 1350 U-joint while maintaining compatibility with the OE 3.5 in. bolt circle.
( 4 )
$137.91
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
