Availability
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$121.99
—
$678.99
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 128 )
$95.99
—
$1,861.99
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 111 )
$25.99
—
$175.99
Spicer Drivetrain Products axle hub assemblies offer strength and durability to ensure longer life. They are designed, engineered, and manufactured to meet or exceed OE requirements, because they are OE parts, ensuring a perfect fit. Spicer Drivetrain Products is the name you can trust for top performance and durability.
( 18 )
$101.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 92 )
$40.99
—
$488.99
Age, miles, and abuse take their toll on drivetrain parts, making rebuilds and new parts a necessity. When you're seeking direct replacements for OEM, you need Spicer Drivetrain Products slip yokes. Spicer products are used in the production of many vehicles and are well-respected for quality, innovation, and value. These slip yokes are produced with the same high standards as the originals for reliable service. When rebuilding a transmission, use the parts that made it great. Go with Spicer Drivetrain Products slip yokes.
( 124 )
$18.99
—
$1,032.99
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 149 )
$16.99
—
$101.99
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$3,796.99
—
$5,229.99
Replace your damaged, worn, or missing yoke with one of these Spicer Drivetrain Products flange yokes. Most are manufactured from durable nodular iron or steel and install in the factory location for a direct fit. The yokes are available for different universal joint styles and configurations to fit your specific application; some are often useful when swapping out standard driveshaft components for a flat flange, pinion-style yoke.
( 54 )
$32.99
—
$482.99
Whether starting a new project or replacing an old part, you'll find what's needed with Spicer Drivetrain Products differential carrier cases. Spicer supplies carriers to many OE manufacturers, so the replacement units are every bit as tough as the originals. They'll accept all factory and most aftermarket internal parts, allowing for modifications. Going mild or wild … Spicer Drivetrain differential carrier cases are the place to start. Order the model recommended for your vehicle and axle application.
( 18 )
$96.99
—
$1,262.99
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 50 )
$163.99
—
$867.99
Spicer Drivetrain Products offers the most advanced driveshaft technology, delivering peak performance for your vehicle. From stub shafts and carrier bearings, to support washers and more, Spicer essential driveshaft components can help maintain light and commercial vehicles, off-highway, military, industrial, and performance applications. Order the replacement parts recommended for your vehicle.
( 11 )
$4.99
—
$354.99
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 43 )
$163.99
—
$1,597.99
Replacing the center support bearing should resolve the problem of a clunking sound in the drivetrain. Spicer Drivetrain bearings will hold good and tight, keeping the driveshaft in place. If the rubber in your old bearings is worn-out, it will allow too much deflection in the shaft—causing vibration that will worsen as the movement increases. Spicer craftsmanship means you get longer bearing life and less downtime, as well as complete interchangeability with existing parts.
( 25 )
$31.99
—
$166.99
Avoid premature failure with Spicer Drivetrain Products differential inner gear kits. Containing the only parts engineered to meet Dana specifications for strength and durability; these kits have everything you need to rebuild your differential case. Forged for longer life in Dana axles, you'll receive spider gears and side gears with shims, as well as the cross shaft and retainer pin. Choose top performance differential inner gear kits manufactured by a legendary name--Spicer.
( 23 )
$135.99
—
$752.99
Spicer Drivetrain Products Life Series Plus U-joints will provide premium performance in the most demanding environments. Building on the superior design, lubrication, and sealing package of Spicer Life Series (SPL) U-joints, the SPL Plus u-joints feature upgraded grease, seal, seal guard, and spacer material. Features of Spicer SPL Plus U-joints: * Extended U-joint life--journal cross engineered with a cold-formed body to ensure better wear and overall strength * Bearing cups are heat-treated for strength, precision-ground, and case-hardened for durability * Multi-lip seal keeps grease in and contaminants out with enhanced seal and seal guard materials and offers maximum retention in a wider range of environments * Thrust washer eliminates friction, end galling, and metal-to-metal contact * Enhanced with synthetic grease--upgraded green synthetic grease significantly improves minimum and maximum temperature capabilities and increases bearing life
( 2 )
$27.99
—
$34.99
Spicer Drivetrain U-joint U-bolt kits provide a secure fit for your universal joint in the differential yoke. Constructed from high-quality materials for long-lasting service, these hardware components ensure that your U-joints and end yokes stay secure. They're available for maintenance and repair on a variety of axle models and U-joint styles.
( 21 )
$6.99
—
$9.99
Spicer Drivetrain Products offers an extensive inventory of weld-on tube yokes. They're manufactured from strong steel in many joint styles to provide the proper press fit into your specific driveshaft tubing. Create a robust connection between your driveshaft and other driveline components by welding on Spicer tube yokes.
( 20 )
$22.99
—
$176.99
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$188.99
—
$1,039.99
Spicer Drivetrain Products front axle stubs are available for a range of applications. These quality-built steel components fit both right and left sides. When you need replacements, these front axle shafts offer a premium, competitively priced option from a name you know and trust—Spicer.
( 7 )
$61.99
—
$309.99
Errrr, bang! Clunk clunk clunk. Very few parts last forever, especially those rotating at a high rate of speed. Spicer Drivetrain Products ring and pinion gears are perfect for replacing worn or damaged gears, changing ratios, or when refreshing the differentials. They hob and shave the gears for longevity with minimal mating stress, combine modern designs and materials including heat-treating and shot-peening to maximize life, and use high-grade steel for consistency and exceptional durability. Each gear set meets or exceeds Dana's standards for OEM equipment. Whether you need lower, higher, or the same ratio gears, look into Spicer Drivetrain ring and pinion gears with installation kit, available for hundreds of applications.
( 12 )
$205.99
—
$1,537.99
Spicer axle bearings are the best choice for your repairs. Along with getting a name you can rely on, your task will be completed with the highest quality materials and construction to get your axle back in shape and on the road. Remember, not all bearings are created equal. Insist on genuine Spicer axle bearing assemblies to service your rig.
( 7 )
$9.99
—
$90.99
Spicer Drivetrain Products' master differential rebuild kits are their most comprehensive axle overhaul kits and come complete with everything you need for ring and pinion gear installation or a thorough and lasting repair. They're the highest quality mix of bearings, cups, and cones--each precisely selected for maximum performance in every position and application. Production upgrades ensure that these genuine Spicer parts are as good as, or better than, the OE parts they replace. Order the kit designed for your make, model, and axle application. Most master overhaul kits include: * Ring gear bolts * Pinion head and tail bearings * Differential bearings * Pinion seal * Pinion nut * Collapsible spacer (where applicable) * Pinion adjusting shims * Differential adjusting shims * Snap rings (where applicable)
( 2 )
$169.99
—
$394.99
Spicer Drivetrain Products offers a full line of CV joints and repair components. Spicer provides the quality and durability of the original part, so you can feel confident that you will only have to do the repair once. From CV head assemblies to dust cap kits, you can find the replacement parts needed for your CV joint application.
( 2 )
$12.99
—
$274.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
