Availability
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 29 )
$32.99
—
$53.99
Crown Automotive steering knuckle seals install between the steering knuckle and axle housing. Kits may include retaining plates and seals and are application-specific. Check attributes for proper fitment. Crown Automotive is renowned for manufacturing the highest quality OE replacement parts.
( 5 )
$24.99
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 31 )
$21.99
—
$53.99
Crown Automotive automatic transmission kickdown cables will help to keep your vehicle shifting smoothly. These throttle control cables are engineered for an OE fit and performance to make your install efficient and operation predictable. Over time cables age, stretch, or even break. Maintain optimum performance with Crown Automotive automatic transmission replacement kickdown cables.
( 30 )
$20.99
—
$39.99
When pinion yokes become damaged or you're just looking to upgrade your differential, Crown Automotive replacement pinion yokes are a direct fit for ease of installation. Crown Automotive is a premier manufacturer and distributor of quality replacement parts for Jeep, Dodge, Plymouth, and Chrysler vehicles, in particular.
( 7 )
$41.99
—
$53.99
Contamination, leakage, and age are all factors that can lead to transmission and filter issues. Crown Automotive transmission filters are designed and built to OEM specs for easy fitment and reliable service. Old or contaminated transmission oil can cause major issues for the transmission. Crown Automotive transmission filters are available in various styles for direct fitment on many vehicles, including submodels from Jeep, Chrysler, Dodge, and Ram. Units are sold individually—or as a kit with gaskets. Encourage better performance with high-quality filters from Crown!
( 3 )
$27.99
—
$42.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$22.99
—
$49.99
Crown Automotive clutch linkage rods provide the fit and function of factory-style equipment. And that means smoother shifts for you. These OE replacements are made from quality materials and are available in a couple of styles and several applications to renew your vehicle's performance.
( 11 )
$22.99
Whether you're doing preventive maintenance or you hear that old familiar whine, turn to Crown Automotive differential carrier bearings to help restore a quiet ride. These oil bath bearings will keep differentials or axles spinning straight down the path. Crown differential carrier bearings are sold individually or as a kit, and are available for a wide range of vehicles.
( 4 )
$24.99
—
$48.99
Crown Automotive clutch release bearings will restore the "heart" of your clutch operation. Whether you call them throwout bearings or release bearings, they are the components that move back and forth—pushing and releasing the other components to engage or disengage your clutch for smooth shifting. Just as your heart's pumping keeps you going, so it is with the release bearing and your clutch. So, for an OE fit and better clutch performance, choose your replacements from the Crown selection—available for a wide range of makes and models.
( 6 )
$24.99
—
$47.99
Most transmission and transfer case boots get put through the ringer. If your old boots are deteriorated or torn up, replace them with Crown Automotive shifter boots. These rubber boots are fashioned identically to the originals, down to the bolt holes. Crown Automotive shifter boots bring OE style and performance to your ride.
( 35 )
$23.99
Crown Automotive clutch linkage bellcranks are designed and built to OEM specs for excellent fit and reliable performance. There are many parts that go into the working of a vehicle's clutch. Of these parts, the clutch release bellcrank is one of the toughest; however, years of use and weathering will eventually take their toll. Crown bellcranks have a natural finish which allows for coatings to match the vehicle's undercarriage. Whether you're updating your ride or completing a restoration, Crown Automotive clutch linkage bellcranks will keep the pedals dancing.
( 1 )
$24.99
—
$26.99
Crown Automotive axle locker sensors ensure that the axle locks are fully engaged for proper operation. When front or rear axles are locked, both wheels move at the same speed with the same amount of force—for improved handling in slippery or off-road driving conditions. These replacement sensors are crafted from original materials and specs for proper fit and performance. They're used on many Jeep applications with Tru-Lock differentials from the early 2000s and up.
( 1 )
$50.99
Vehicles with manual transmissions are not only fun to drive, but also allow excellent control during all weather conditions and environments. Crown Automotive clutch forks can help you cure clutch issues. They're designed and built to OE specs for easy installation and reliable service. Forks deal with a lot of pressure, so they should be checked for cracks on a regular basis. Crown replacement clutch forks are designed for proper fitment on a variety of makes/models.
( 7 )
$23.99
Crown Automotive manual transmission input bearing retainers are heavy-duty steel retainers built to replace parts, which are prone to suffer oil starvation at slightly deficient oil levels. Retainers often get worn or damaged due to being in constant motion any time the engine is running. Worn or defective retainers may create excessive noise, which continues as long as the engine runs. A severely worn input shaft bearing can cause the transmission to slip out of gear while moving. So, don't wait; go with Crown and travel with peace of mind.
( 6 )
$37.99
—
$52.99
Pinions use either a yoke or flange for mounting driveshafts, with both having advantages and disadvantages. Crown Automotive pinion flanges are great replacements for stock units, and an excellent upgrade for hardcore off-roaders. Their tough, but smooth rounded surface glides easily over rocks, and there's no need to take the flanges off to change driveshafts. Whether you're upgrading an axle or replacing parts, always use Crown Automotive pinion flanges.
Not Yet Reviewed
$44.99
—
$52.99
Restore smooth operation to your clutch with Crown Automotive clutch cables. When worn, your cables may stick, catch, bind, or fray and break. The construction of these OE-style replacement parts will provide better friction, heat, and collapsibility defense.
( 2 )
$20.99
—
$42.99
If you're having trouble getting in gear, Crown Automotive manual transmission shifter forks can help. These shaped pieces of steel engage the slider gears and push them into the positions desired by the driver to create the intended gear. High-quality replacement transmission parts are constructed from durable materials to ensure the strength that every auto enthusiast expects from Crown Automotive.
( 7 )
$20.99
—
$52.99
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$20.99
—
$55.99
Fix your light issues with Crown Automotive neutral and backup safety switches, direct replacements for your original equipment at a reasonable price. Neutral safety switches prevent the vehicle from starting when in any other gear besides "Neutral" and "Park"—and they double as a backup light switch. Backup switches can make other drivers aware of your intentions when you shift into reverse. These small replacement units help to prevent accidents which may occur if your old switches become loose or have degraded over time. Crown safety switches are available in various styles for fitment on numerous makes and models.
( 17 )
$22.99
—
$44.99
Flywheel ring gears can easily be replaced on your manual transmission for a lot less money than the entire flywheel. Crown Automotive has the OE-style flywheel ring gears which will allow your starter to get the engine spinning. If the pinion teeth don't mesh cleanly with the ring gear, it will cause accelerated wear on your flywheel and starter. Heavy-duty steel gears from Crown will get you moving again at peak performance.
( 1 )
$23.99
—
$35.99
Worn or damaged CV boots allow the grease surrounding the CV joints to become contaminated with dirt, sand, rocks, and water--which leads to rapid wear. Give those defective parts the boot. Replace them with factory-style components from Crown Automotive. These durable rubber CV boot kits will protect your axle shaft assemblies and keep them functioning smoothly. Order the correct boots for proper fitment on your Jeep, Plymouth, Dodge, Ram, Chrysler, or American Motors vehicle.
( 2 )
$20.99
—
$40.99
Crown Automotive disconnect axle replacement components are available to ensure that your vehicle will disengage the front drive axle when you switch from 4WD to RWD or 2WD. If these parts should fail and you are stuck in the wrong drive, restore your front-wheel spin and reduce rolling resistance with quality components--axle shift collars, shift forks, hardware, and gaskets--from Crown for complete axle disconnect service.
( 3 )
$23.99
—
$34.99
Crown Automotive differential shim kits are precisely machined per specs for each individual application to ensure your differential is lined up correctly. These carrier shims adjust the ring and pinion backlash and set differential bearings preload. Crown parts are vehicle-specific, so refer to the notes and applications for the kits you need.
( 1 )
$22.99
—
$55.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
