Availability
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car—and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing. Now you can secure your vehicle to a trailer or hauler with easy-to-install and easy-to-access tie-down brackets from Calvert Racing. They're designed to bolt onto your CalTracs mounts and leave on without affecting performance. The cargo tie-down brackets can be used in different configurations, depending on your needs. Additional notes: * Does not include straps * Fits standard CalTracs and CalTracs for 1500 Series trucks * 1/4 in. zinc-plated steel brackets, 45-degree angle * Overall size: 5 1/8 in. x 4 in.; hole is 1 3/8 in. diameter
( 1 )
$30.00
Mac's weld-on axle housing tie-down brackets are made from 1/4 in. steel tube which is cut on a tube laser then tumbled for a smooth finish. Designed to be low-lying and to perfectly accept Mac's twisted snap hooks, these brackets create the perfect permanent tie-down point on nearly any vehicle. They remove the need for an axle strap, thus creating an abrasion-free tie-down situation. Instead of routing an axle strap over potentially sharp areas, simply clip a ratchet strap to the bracket and run it out to your tie-down point. In addition, by eliminating the need for an axle strap, you also eliminate possible contact with critical vehicle components such as brake lines, wires, and hoses that may be in the way when tying down around the axle. This is also an excellent solution for off-road vehicles that have modified axles or axle trusses, which can be bulky or have rough edges. Mount a pair of these brackets prior to adding your choice of finish and you'll have a beautiful, permanent tie-down point. Use the brackets on low-profile vehicles to avoid spending time on the ground and under the vehicle when tying down to the axle. When installed on classic cars, they help prevent damage to paint and body, as the only point of contact for the strap becomes the bracket itself. The shape and size of these brackets will fit a wide variety of axle diameters. To install, select the correct position for the bracket based on your vehicle and needs, clean off a spot on the housing, and weld the curved portion of the bracket directly to the axle.
Not Yet Reviewed
$44.95
Add a dedicated front recovery point to your Toyota Tundra. These aFe POWER tow hooks mount directly to the frame and are much safer than the factory tie-down loop when towing or recovering a stuck vehicle. The 3/4 in. solid steel hooks are designed to safely withstand and distribute heavy loads, allowing access to several recovery attachments for a strong and durable recovery point. The tow hooks are powdercoated (in color options) for protection from the elements. Additional details: * Front tow hooks are constructed from 3/16 in. laser-cut, CNC-machined steel brackets, and 3/4 in. solid steel bar. They're MIG-welded for strength and durability. * Installation: Bolts directly onto the frame, using the front sway bar mounts with no drilling or modifications. Retains the front sway bar use while clearing the Active Aero front spoiler and factory bumper. * Available individually or in pairs
( 12 )
$76.00
—
$169.00
Winch shackles from 41.22 Inc. are precision CNC-machined from a single billet of certified 6061-T6 aircraft-grade aluminum. The enclosed shackle design is much stronger and safer than open hooks which can slip off if not under constant tension. These shackles have been independently load-tested and have certified minimum breaking strength of more than 41,000+ lbs. (maximum working load: 15,000 lbs.). Each winch shackle features a huge eyelet allowing virtually any size soft-shackle to directly attach without the use of additional D-rings. Order the color and quantity you need. [NOTE: The optional matching 41.22 Inc. fairlead (sold separately) precisely fits the profile of the shackle and keeps it in a perfect horizontal position. The fairlead adds that extra bling and displays your shackle for extra bragging rights; it's not something you need—it's something you want!] Additional details: * Ceramic finish (Cerakote C-Series) UV and chemical-resistant * Shackles come with 5/8 in. hardened stainless steel pin * Optional fairlead comes with Grade 8 mounting bolts and nuts
Not Yet Reviewed
$170.10
PRP Seats SpeedStrap axle straps feature full-length protective sleeves and robust D-rings, making them the ultimate solution for securing and protecting your vehicle's finish during transportation, and they are perfect for use with trailers that only have stake pockets. The innovative design allows for quick and easy wrapping, and PRP SpeedStrap axle straps the perfect addition to your toolkit, whether you're a professional hauler or transporting your own vehicle. Strap specifications: * 10,000 lb. rated D-rings * 12,000 lb. rated webbing * Available in black or red
Not Yet Reviewed
$32.99
MAXTRAX kinetic recovery ropes are designed, as their name suggests, to be the kinetic element during a vehicle recovery. They produce increased kinetic power compared to flat snatch straps, with up to 30 percent elongation providing a smoother, safer dynamic recovery. These kinetic ropes have been designed and tested as part of the MAXTRAX Recovery System. Additional notes: * The MAXTRAX Recovery System is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. * Critically, if the MAXTRAX Recovery System is overloaded, the MAXTRAX FUSE Shackle is designed to be the weakest link, and the expected point of failure. * Accordingly, you MUST use a MAXTRAX Fuse Shackle in the MAXTRAX Recovery System during any vehicle recovery.
Not Yet Reviewed
$79.99
—
$179.99
The perfect addition to ratchet or cam buckle straps, these soft loops from Mac's Custom Tie-Downs prevent metal hardware from contacting your bike. They're ideal for looping around handlebars, triple trees, etc. and are made from 4,000 lb. double-stitched webbing.
( 2 )
$5.95
—
$6.95
Mac's Direct Hook ratchets connect the attachment hook directly to the ratchet handle, moving it out to your attach point for superior access, especially in cases where chassis clearance might be a problem. Easy-release ratchet handles eliminate any adjustment stickiness. The one-piece construction and addition of mandrel caps make these handles 40 percent more rigid—and keeps debris out of the moving parts. Update your worn or outdated tie-down strap ratchet with an easy-release replacement from Mac's!
Not Yet Reviewed
$24.26
These Simpson axle ratchet tie-downs with D-rings provide additional security from the axle of the rear-end. Made of strong and durable webbing, these tie-downs feature a ratcheting buckle with an integral hook and a sail hook that fastens into a D-ring.
Not Yet Reviewed
$49.95
The recovery points from 41.22 Inc. fit any standard 2 in. receiver with a certified minimum breaking strength of 49,150 lbs. Unlike most other hitch recovery points, these feature a generous 1 in. diameter x 2 in. long shackle eyelet—which means you do NOT need to attach D-ring. You can directly attach most soft shackles and even winch hooks (less components and metal parts = safer recovery / less prone to flying metal pieces). Order the color and quantity you need. Additional details: * Machined from a single billet of 6061-T6 aircraft-grade aluminum * Max working load 15,000 lbs. * Weighs only 1.13 lbs. * Ceramic finish (Cerakote C-Series) UV and chemical-resistant * Uses standard 5/8 in. hitch pin (not included)
Not Yet Reviewed
$85.50
When you're hanging on a 50-degree incline or buried in mud up to the doors, sometimes you just need brute strength to get past the obstacle. Instead of using dangerous, failure prone chains, reach for your Borne Off-Road tow strap to get you through. They are constructed from premium heavy-duty low-stretch PolyBlend material for pure strength and longevity that is also easy to handle and smooth to the touch. The reinforced anti-abrasion end loops provide you with durable attachment points, and they are available in different widths and lengths. Borne tow straps are the ideal items to keep in your rig, because you never know when you may need to give someone a pull, or when you may need to get pulled out yourself. Select the width and length you'd prefer. Additional features and notes: * Excellent abrasion and UV resistance * Smooth surface for easy handling * Includes: -- Tow strap -- Velcro® strap -- Borne Off-Road storage bag * Mishimoto Lifetime Warranty Tow strap choices: * 4 in. wide x 30 ft. length -- 41,600 lb. maximum breaking strength -- 13,850 lb. working load limit * 3 in. wide x 20 ft. length -- 31,500 lb. maximum breaking strength -- 10,500 lb. working load limit * 3 in. wide x 30 ft. length -- 31,500 lb. maximum breaking strength -- 10,500 lb. working load limit
Not Yet Reviewed
$73.95
D-Rings by 41.22 Inc. feature a unique design with a large eyelet which is machined smooth to not fray your soft shackles or ropes. Precision-machined from a single billet of 6061-T6 aircraft-grade aluminum, each D-ring has been independently tested and certified minimum breaking strength of 31,000+ lbs. (working load limit 10,000 lbs). These towing accessories include a 5/8 in. stainless steel hardened pin and tool-free quick-disconnect pin. They're designed to complement the winch shackle. Order the color and quantity you need. Additional details: * For use with soft-shackles, straps and rope only. * Do not side load * Do not exceed the WLL (Working Load Limit) * Ceramic finish (Cerakote C-Series) UV and chemical-resistant
Not Yet Reviewed
$67.50
If you own a truck, you know that you can never be too prepared to tow or recover a stuck vehicle. With Borne Off-Road hitch receiver shackle mounts, your Class 2 to Class 4 hitch can double as a recovery point wherever you go. These 2 in. mounts are constructed from billet 6061 aluminum and are sturdy enough to stand up to 10,000 lbs. of pulling force. They are available in several anodized finishes, including a military-grade hard anodizing that resists scratching and corrosion. Select your favorite color(s). Additional features: * 10,000 lb. working load limit meets or exceeds hitch receiver weight limit * CNC-machined billet 6061 aluminum * Chamfered eye prevents damage to soft shackles and synthetic lines * Two hitch pin locations allow the shackle mount to clear large bumpers while remaining tucked in for improved departure angle * Reversible design with rugged chamfered end to match your vehicles aggressive style * Mishimoto Lifetime Warranty
Not Yet Reviewed
$95.95
—
$103.95
Sometimes, there's nothing better than old-school solid forged steel to give you confidence off-road. Borne Off-Road D-ring shackles are 3/4 in. forged solid steel with a breaking strength of 54,000 lbs. and a 9,500 lb. working limit, so you can be sure that whatever you're pulling, towing, or recovering will stay firmly attached to your vehicle. Strong enough to recover even the heaviest off-road machine, each shackle features a 7/8 in. threaded pin that will fit most bumpers, and rubber washers and isolators to prevent noise and damage to the shackle or bumper. Choose a pair in the color you prefer. Additional features: * Heavy-duty powdercoated finish protects shackle against rust * Available in Borne Off-Road blue, black, gray, gunmetal, and red to match any color scheme * Mishimoto Lifetime Warranty
Not Yet Reviewed
$33.95
Some folks might say there are only two essential tools for the trail: a hammer and a roll of duct tape, but Borne Off-Road would argue that the third is a good set of bungee cords! Bungees are a universally handy item to have, helpful in nearly any situation. From tying down tarps to holding up an item on a roof rack, bundling up an electrical cord at home to holding down a loose part, you can never go wrong with having a bungee or two around! The Borne Off-Road 28-piece bungee cord set includes canopy ties, tarp bungees, tarp clips, and plastic-coated hook bungees in 16 in., 22 in., 30 in., 38 in., plus a convenient Borne Off-Road drawstring bag to keep everything neat and tidy. Additional details: * Double braided rubber and latex construction provides strength, stretch, and durability * Plastic coated, steel-core hooks won't scratch surfaces and provide superior strength * The included tarp clips allow you to secure your tarp without damage * Canopy ties are useful for any and everything, from home and office to on the trail
Not Yet Reviewed
$33.95
Minor upgrades can make a significant impact on the overall presence of your truck. Borne Off-Road billet tow hooks are aggressively styled to separate your truck from the rest. Precision designed with the latest 3D modeling software; the tow hooks are constructed from durable CNC-machined billet 6061 T-6 aluminum, designed with a knurled surface, and offered in numerous powdercoat finishes, providing your truck with improved aesthetics and added utility. Additional features and notes: * Available with natural finish or colored powdercoated finish that provides durability, corrosion resistance, and unique styling * Knurled surface provides optimal grip as a standing point when working in the engine bay * Utilizes factory hardware for installation * Borne Off-Road Lifetime Warranty
Not Yet Reviewed
$309.95
Recovery gear is a necessity in any off-roaders arsenal of tools to be prepared for whatever the wilderness brings your way. In the world of wheeling, it's not a question of if you'll get stuck, but when, and Borne Off-Road Kinetic Energy ropes are perfect additions to help keep you prepared for whatever may come. Available in two diameters, both are constructed from heavy-duty double braided nylon material that is designed to be strong and dependable, but also easy to handle and smooth to the touch. With fantastic UV and abrasion resistance, the braided nylon material allows for up to 30 percent stretch, permitting the rope to build kinetic energy which transfers into forward momentum of the vehicle being pulled and ease the transition from slack to tension, helping reduce jarring and parts breakage compared to traditional ropes, cables, and tow straps. Borne Off-Road Kinetic Energy ropes have polyurethane coated end loops that provide durable attachment points, and each rope includes a storage bag. Select the diameter you prefer. Additional notes: * 7/8 in. diameter x 30 ft. length--8,000 lb. working load limit * 3/4 in. diameter x 30 ft. length--6,000 lb. working load limit * Mishimoto Lifetime Warranty
Not Yet Reviewed
$133.95
—
$166.95
AEV soft shackles are lightweight, strong, and versatile, making them a safe and viable option when a traditional D-ring anchor shackle cannot be used. AEV soft shackles are manufactured from premium Dyneema SK78 synthetic fiber and feature an additional layer of chafe protection to protect against damage from sharp edges and rough surfaces. Order the AEV soft shackles with the MBS and workload limit suited to your application needs.
Not Yet Reviewed
$85.00
—
$98.00
Mac's UTV wheel net packs were developed specifically for the UTV/Side-by-Side market. Wheel nets lock your UTV wheels in place during transport, while allowing the vehicle's own suspension to smoothly absorb the bumps of the road. Each wheel net tie down is constructed using 2 in. wide, 12,000 lb. capacity webbing, over-stitched for an additional margin of safety. This setup will work well with even the heaviest factory UTVs. The kits are available for small, medium, or large tires, in a variety of wheel net colors.
Not Yet Reviewed
$299.95
Secure your UTV or Side x Side for safe transport with PRP Seats SpeedStrap UTV tie-down kits. Each kit provides tie-downs, SpeedWraps, and a tool bag to keep everything conveniently stored when not in use. Rated at a 1,300 lb. Safe Working Load (SWL) and a 4,000 lb. Maximum Rated Capacity (MRC), each 1.5 in. tie-down is built with high-quality, UV-treated, water-resistant polyester webbing, a premium ratchet mechanism, and robust twisted snap hooks. Each one also includes built-in soft tie ends that allow you to wrap the strap around A-arms, trailing arms, or tow points without scratching the paint. PRP SpeedStrap UTV tie-down kits are available in red or black. Choose your preferred color. Additional features and benefits: * Ratchets feature wide handles for a comfortable grip with steel barrel and a rubberized release handle * Heavy-duty teeth and a latch plate prevent ratchet from breaking or bending as you tighten it down * Twisted snap hooks with built-in retention clips, so they won't come undone * Kits include: -- Four 1.5 in. x 10 ft. ratcheting tie-downs with soft ties -- Four SpeedWraps -- Large tool bag
Not Yet Reviewed
$158.99
The weight of a UTV (side-by-side) demands a more robust tie-down solution than standard 1 in. utility straps can offer. Mac's UTV heavy-duty tie-down packs provide you with this increased holding capacity, but at a cost far lower than that of a car tie-down kit. These straps are built with the same high-quality material used in Mac's premium auto straps, so you get the improved chafing and UV resistance. Plus, you get Mac's patented Direct Hook ratchet, which makes loading and unloading your vehicle a breeze. On the fixed end of each strap is an integrated adjustable combo axle strap—to make it easy to tie down to A-arms or through your wheels. It can even be used as a straight pull hook-to-hook. Additional notes: * 5,000 lb. minimum breaking strength * Patented easy-release ratchet handles * 8 ft. long straps * Color and ratchet end style options
Not Yet Reviewed
$202.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
