Automotive Tools & Shop Equipment at Summit Racing

Tilton Transmission and/or Differential Oil Cooler Pumps

The Tilton transmission and differential oil cooler pumps are ideal for pumping oil through oil coolers. They feature an internal bypass valve and are self-priming up to several feet above the source from which it draws. Tilton cooler pumps are a positive displacement type of pump, so their output is directly proportional to the motor speed. For example, if a lighter load increases the motor speed by 25 percent, then the flow rate increases by 25 percent as well. The Buna cooler pumps are designed for use with standard oils and coolants, while the Viton® models are designed for use with corrosive fluids such as alcohol. Intermittent duty pumps are designed for applications where the pump does not need to be used continuously, such as being turned on/off by the driver or a relay at established temperatures. Order the model for your application needs.

4.9 out of 5 stars ( 20 )

$238.00

—

$267.75

Lisle Transmission Oil Cooler Line Tools

Lisle transmission oil cooler line tools feature a stepped design with two sizes (3/8 and 1/2 in.) to work on a variety of vehicles. These tools allow you to remove the transmission oil cooler line from the connector.

4.29 out of 5 stars ( 14 )

$6.50

—

$16.99

OTC GM Transmission Oil Cooler Line Disconnect Tools

OTC designed these oil cooler disconnect tools to work in cramped areas, allowing one-hand operation. After you insert the OTC disconnect tools into the quick connect fitting, a quarter turn of the tools quickly and easily releases the fitting on the transmission end of the oil cooler line. These OTC tools work on 2WD and 4WD pickups and vans with 1991 and later 4L80E and 1993 and later 4L60E electronic overdrive transmissions.

4.25 out of 5 stars ( 4 )

$28.99

Rough Country Cooler/Fridge Slide Out Trays

If you're looking for a convenient way to bring your Rough Country portable electric cooler with you on all your outdoor adventures, their cooler/fridge slide out trays are designed to allow you to easily access your cooler while keeping it secure. The slide out trays feature a durable powdercoated steel construction that keeps your cooler right where you need it. This sturdy platform holds up to 250 lbs. and features ball-bearing slides for easy use. Once loaded, tie-down your cooler using the four included durable tie-down straps if heading off-road. The safety latch ensures secure locking when collapsed—a handy feature that keeps the tray from shifting and prevents unwanted movement of the cooler. These slide out trays mount easily to any flat surface and includes the stainless steel mounting hardware you will need to make installation a breeze! Perfect for your Rough Country portable electric cooler, these versatile slide out trays can also be used to carry tools, adventure gear, and more!

Not Yet Reviewed

$209.95

Cal-Van Tools BMW Oil Cooler Pliers

Cal-Van Tools BMW oil cooler pliers will make your hard job easier. These special tools release the hydraulic cooling lines that connect to the transmission. Cal-Van oil cooler pliers feature comfortable handle grips.

Not Yet Reviewed

$37.99

OTC Ford Transmission Cooler Line Disconnect Sets

These OTC transmission disconnect sets are much-needed tools designed to service your transmission. The OTC Ford transmission cooler line disconnect sets will work on late model Ford transmission cooler lines. Simply snap around the cooler line, push into the fitting, and the fitting releases. The cooler line can then be removed. This set works on the following applications: * Ford Explorers with 5R55W transmissions 2003-08 * Ford Super Duty trucks with 4R100 transmissions 2003-08

Not Yet Reviewed

$20.99

FTI Performance Transmission Plug Kits

Seal up your GM automatic transmission with an FTI Performance complete transmission plug kit. These plastic plugs and caps help to prevent fluid leakage during transport or storage, sealing every hole securely. FTI offers a wide variety of transmission accessories for your high performance and racing needs.

3.4 out of 5 stars ( 5 )

$16.49

Dometic Fridge Slides

Wander without worry. Dometic fridge slides are designed to allow easy access to your CFX3 powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the fridge slides must-haves for the serious outdoor adventurer. They're available in a variety of sizes for different cooler models. Additional details: * Can be fully extended for easy access to food and beverages * Lever is easy to use and allows for simple operation * Rugged latching system reduces rattling noise while driving * Dust cover keeps sand and dirt out of slide rails * Optimized design avoids adding unnecessary weight to the vehicle * Comes complete with tie-down straps and M6 bolts

Not Yet Reviewed

$350.00

—

$400.00

Smittybilt 75L Basecamp Fridge Slides

If you're looking for sturdy convenient way to bring your Smittybilt 75L Basecamp Fridge/Freezer on your next adventure, the Smittybilt 75L Basecamp fridge slides provide the perfect solution. These refrigerator slide mounts will allow you to easily access your Smittybilt Fridge/Freezer while keeping it secure and mountable to any flat surface, including truck beds. The fridge slides feature a polypropylene slide-out cutting board, stainless steel hardware, and four nylon straps for added support. The 75L fridge slides weigh approximately 40 lbs. and are made of galvanized steel and powdercoated for a durable finish. This is the slide mount accessory only. Smittybilt 75L Basecamp Fridge/Freezer sold separately. Product Overview: * Slide mount features a galvanized steel construction * Works with the Smittybilt 75L Basecamp Fridge/Freezer and most fridges up to 75L * Includes (4) nylon lashing straps * E-coated before powdercoating * Zinc-coated, steel-ball bearing slides * Installation hardware included * Polypropylene slide-out cutting board * Outer dimensions: 40.7 in. L x 24.8 in. W x 3.5 in. H * Inner Dimensions: 39.3 in. x 22.4 in.

Not Yet Reviewed

$289.99

Smittybilt 55L Waypoint Fridge Slides

If you're looking for sturdy convenient way to bring your Smittybilt 55L Waypoint Fridge Freezer on your next adventure, the Smittybilt 55L Waypoint fridge slides will provide the perfect solution. These refrigerator slide mounts will allow you to easily access your Smittybilt Fridge/Freezer while keeping it secure and mountable to any flat surface, including truck beds. The fridge slides feature a polypropylene slide-out cutting board, stainless steel hardware, and four nylon straps for added support. The 55L fridge slides weigh approximately 40 lbs. and are made of galvanized steel and powdercoated for a durable finish. This is the fridge slide mount accessory only. Smittybilt's 55L Waypoint Fridge/Freezer sold separately. Product Overview: * Slide mount features a galvanized steel construction * Works with the Smittybilt 55L Waypoint Fridge/Freezer and most fridges up to 55L * Includes (4) nylon lashing straps * E-coated before powdercoating * Zinc-coated, steel-ball bearing slides * Installation hardware included * Polypropylene slide-out cutting board * Outer dimensions: 30.7 in. L x 20.6 in. W x 3.5 in. H * Inner Dimensions: 29.3 in. x 18.7 in.

Not Yet Reviewed

$279.99

Summit Racing™ Professional Flaring Tools

Summit Racing™ professional flaring tools enable you to conquer a variety of different plumbing jobs—including brake lines, transmission cooler lines, and fuel lines! These tools are designed to easily form 37 or 45 degree double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing. All of the brake-flaring forming dies are mounted right on the turret, so there's no fumbling around for small parts or worry about missing dies. Their 'turret-style' design allows you to make precision flares in record time, and they can be used with 3/16 in., 1/4 in., 5/16 in., and 3/8 in. diameter lines. The T-handle screw clamp secures your line in place while forming. Fabricating hard lines begins with serious tools—Summit Racing™ professional flaring tools! Order the model that forms the angles you need.

3.4 out of 5 stars ( 15 )

$179.50

—

$249.99

K Tool Professional Brake Flaring Tool Kits

K Tool professional brake flaring tool kits are designed to easily form double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing (depending on model). They handle all plumbing jobs, from brake and fuel lines to transmission cooler lines. Their turret-style design allows you to make those precision flares in minimal time. All of the brake-flaring forming dies you need are mounted right on the turret, so there's no need to worry about missing dies. K Tool professional brake flaring tool kits can be used with 3/16 in., 1/4 in., 5/16 in., and 3/8 in. diameter lines. Their specially designed T-handle screw clamp securely holds your line in place during forming for maximum precision. The kits are available in 37 degree or 45 degree flare options.

4.86 out of 5 stars ( 88 )

$249.99

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$3,933.70

—

$8,147.20

Earl's Performance Electric Oil Circulation Pumps

Earl's Performance electric oil circulation pumps are ideal for circulating gear oil through an external oil cooler for cooling differentials or manual transmissions. These heavy-duty pumps feature a brass housing with a nickel plated finish and a 4-bolt mount with rubber vibration isolators. The compact design is durable enough to mount anywhere on the chassis or underhood. Earl's Performance electric oil circulation pumps feature: * Self-priming design with a flow rate of up to 2.1 gpm * Maximum oil weight of up to 90W * Lightweight 5.5 lbs. * 12 V with 10 amp draw * Maximum pressure of up to 72.5 psi * Compact dimensions: 6 1/2 in. tall x 4 5/8 in. wide x 3 3/4 in. deep

5.0 out of 5 stars ( 1 )

$562.95

Summit Racing™ Professional Flaring Tool Replacement Turret and Die Kits

Handle all of your automotive plumbing jobs—from brake lines to fuel lines to transmission cooler lines—with the help of a Summit Racing™ professional flaring tool replacement turret and die kit. The dies mount on the turret body, and a T-handle screw clamp holds the line in place during forming. When your flaring tool needs replacement parts, Summit Racing™ offers a variety of components to restore original performance.

5.0 out of 5 stars ( 8 )

$96.99

Knipex Ear Clamp Pliers

Knipex ear clamp pliers make mounting 1 and 2-ear clamps simple and reliable. Forged from oil-hardened, high-grade special tool steel, these specialty pliers are black phosphate coated for corrosion protection—and feature slim polished heads and plastic coated handles for a good grip. The tools will not damage press points of clamps, and are offered with or without a side jaw that permits good accessibility to the ear clamp in confined areas. They're a great choice for using on clamps on CV boots, cooler and fuel lines, air pressure systems, compressors, and more.

5.0 out of 5 stars ( 5 )

$23.99

—

$32.99

Milwaukee M18 REDLITHIUM High-Output XC6.0 Batteries

Milwaukee's M18 REDLITHIUM High-Output XC6.0 batteries provide 50 percent more power and run 50 percent cooler versus their M18 REDLITHIUM XC battery packs. The optimized combination of size and increased power provide a great solution for the entire range of M18 products. They deliver fade-free power and run substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. These batteries provide increased power in extreme cold weather conditions below 0 degrees F/-18 degrees C and deliver more work per charge. Milwaukee M18 REDLITHIUM High-Output XC6.0 batteries are built with REDLINK Intelligence and an onboard fuel gauge. They are fully compatible with 150 plus M18 solutions.

5.0 out of 5 stars ( 1 )

$199.00

—

$299.00

EMAX Industrial Silent Air Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

3.0 out of 5 stars ( 1 )

$2,647.90

—

$4,424.60

Milwaukee M18 FUEL 1 in. D-Handle Extension Anvil High-Torque ONE-KEY Impact Wrenches

Milwaukee M18 FUEL 1 in. D-handle extension anvil high-torque ONE-KEY impact wrenches are cordless and powerful! They are designed and built with key features and technology that enable you to work smarter, more efficiently, and with the nut-busting torque and fastening power to complete the most demanding applications. These Milwaukee M18 FUEL impact wrenches feature ONE-KEY technology that allows you to customize, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control and prevent the over-torque of lug nuts by automatically shutting off the tool. For unmatched performance, control, and protection pick up a Milwaukee M18 FUEL 1 in. D-handle extension anvil high-torque ONE-KEY impact wrench. They are available as tool only with tool-free adjustable handle and lanyard loop, or in a kit that also includes battery packs, charger, and a carrying case. Key features include: * POWERSTATE brushless motor delivers up to 2,000 lb.-ft. of nut-busting torque and 1,900 lb.-ft. of fastening torque * ONE-KEY enabled Lug Nut Mode prevents over-torque and offers more control by automatically shutting off the tool * ONE-KEY compatible provides the ability to customize, track, and manage tools for increased productivity and investment protection * 4-Mode DRIVE CONTROL provides greater control over output speed and power * A patented battery isolation system manages high-frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use * Tri-LEDs deliver high-definition lighting to increase workspace visibility with less shadows * 360 degree adjustable and removable side handle * Lanyard loop allows for safer use and easier storage * REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating, and over-discharge * Premium rubber overmold withstands corrosive materials and provides increased comfort when in use * Unmatched productivity with the runtime to remove and install up to 120 lug nuts on a single HIGH OUTPUT HD12.0Ah battery charge * M18 REDLITHIUM HIGH OUTPUT HD12.0 battery packs deliver 50 percent more power and runs 50 percent cooler * Compatible with all M18 batteries

4.2 out of 5 stars ( 5 )

$899.99

—

$1,499.00

Milwaukee M12 REDLITHIUM XC6.0 Batteries

Milwaukee M12 REDLITHIUM XC6.0 batteries deliver up to three times more run-time, 20 percent more power, and twice as many recharges than standard lithium-ion batteries. These lithium-ion power packs feature superior construction, electronics, and performance—giving you more work per charge and more work over pack life than any battery on the market. The rechargeable batteries also offer you 5.0 amp-hours of run-time. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0 degrees F (-18 degrees C). The compact, lightweight design allows you to work in tight spaces and reduces fatigue. Built-in REDLINK Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations—while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize your battery's life. Additional notes: * Powers over 70 Milwaukee M12 cordless tools

5.0 out of 5 stars ( 1 )

$129.00

Lisle Jiffy-tite Disconnect Tools

Lisle Jiffy-tite disconnect tools are designed to disengage the line from Jiffy-tite connect fittings without removing the clip. The handy spring-action of these aluminum tools keeps them on the line and makes them easier to use. The teeth fit perfectly into the tight tolerances of your Jiffy-tite connectors. When rotated, they allow the line to be pulled without damage to the connector or the retaining clip, so that they can be reused. These tools are available for the most common sizes of Jiffy-tite fittings found on oil cooler lines used on transmissions, radiators, and other applications. Order the size needed for your applications, or the complete kit.

4.57 out of 5 stars ( 7 )

$66.99

K Tool Professional Flaring Tool Replacement Turret and Die Kits

Handle all of your automotive plumbing jobs—from brake lines to fuel lines to transmission cooler lines—with the help of K Tool professional flaring tool replacement turret and die kits. The dies mount on the turret body, and a T-handle screw clamp holds the line in place during forming.

5.0 out of 5 stars ( 1 )

$128.99

Performance Tool Fuel and Transmission Line Disconnect Tools

Performance Tool fuel line disconnect tools make separating spring coupling fittings and quick disconnect fittings easier. PT offers a choice of scissor-type tools for fuel and air conditioning lines, plus a color-coded, anodized aluminum set of tools for fuel lines and transmission cooler lines.

3.94 out of 5 stars ( 16 )

$6.99

—

$50.99

Milwaukee M12 REDLITHIUM XC 4.0 Extended Capacity Batteries

Milwaukee M12 REDLITHIUM XC 4.0 extended capacity batteries deliver up to 2 times more runtime, 20 percent more power, and 2 times more recharges than standard lithium-ion batteries. They feature superior pack construction, electronics, and performance to deliver more work per charge and more work over pack life, offering 4.0 amp-hours of runtime. With Milwaukee durability built into each pack, the M12s run cooler and perform in climates below 0 degrees F. Managed by Milwaukee's exclusive REDLINK Intelligence, they feature overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Instantly upgrade the runtime and durability of your Milwaukee M12 cordless tools with REDLITHIUM XC 4.0 batteries.

Not Yet Reviewed

$99.00

Automotive Tools, Garage Tools & Shop Equipment