Availability
Showing In Stock Items. Show All 101 Items.
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 197 )
$83.99
Summit Racing™ LS./LT engine lift plates assist you with removal and installation of your engine. Made from 1/4 in. thick steel, our super strong lift plates are specifically designed for the Late Model Gen 3,4,5 LS and LT Series GM engines. These bolt in place of the valley cover and feature three lifting points for balanced engine weight or offset for angling engine with transmission attached. Let us give you a hand in the garage with our Summit Racing™ LS/LT Engine Lift Plates.
( 6 )
$71.99
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 9 )
$46.99
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 7 )
$138.99
OTC axle shaft seal installers for are designed for use on select Ford F-Series Super Duty trucks that have a vacuum-operated front axle. The drivers are built into the installers, saving you time and money! They correctly install the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage.
( 27 )
$143.99
OEM Automotive Tools GM harmonic balancer pullers save you time when removing harmonic balancers without tapped holes. They eliminate the need to remove the radiator. Many balancers found on GM and Mopar vehicles do not have tapped holes; these tool feature a "clip-in" design, allowing removal without bolting the puller to the balancer.
( 16 )
$65.99
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$359.99
—
$369.99
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$205.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$99.99
—
$229.99
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 53 )
$49.00
Make between-rounds valve spring changes quickly and easily with these Summit Racing™ valve spring compressors. With multiple styles to choose from we're sure to have a spring compressor to suit your needs.
( 309 )
$99.99
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 2 )
$47.99
The right equipment can make your projects simpler and more enjoyable. Allstar Performance heavy-duty engine cradles will store, transport, and allow you to work more conveniently on your engines. Manufactured from 14-gauge, 1 in. square tubing, these cradles are given a black powdercoat finish to ward off rust and corrosion. The cradles include Grade 5 fasteners and a provision for mounting wheels (not included) with 1/2 in. studs. Your project's finished? Simply disassemble and store the cradles to free up floor space in your garage or shop. Allstar cradles are available for specific engine types, including LS, GM, Mopar, Ford, Chrysler, Dodge, Hemi, Jeep, Oldsmobile, and Pontiac. Order the model that best suits your application.
( 124 )
$99.99
Using ICT Billet Engine Saver stand adapters mean never having to worry about your valuable engine falling off the stand and being damaged. These 1/2 in. thick heavy-duty plates are made from aerospace-grade billet aluminum, and will greatly increase the clamping strength of your engine stand by using all bellhousing bolts and by lowering engine in stand mounting points. Engine Saver adapter plates will fit most engine stand slot bolt patterns and can be drilled to accommodate other stands. ICT Billet Engine Saver stand adapters include plate, spacers, and mounting hardware.
( 33 )
$160.99
ICT Billet vacuum pump block-off plates are designed to plug the oil galley when the vacuum pump is removed from your engine block. Built from high-quality, aerospace-grade billet aluminum, these kits include the necessary O-rings and hardware needed for installation. Order the kit recommended for your vehicle and engine application.
( 3 )
$36.99
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
Summit Racing™ 2-piece engine dollies or stands are constructed from heavy-duty, high-quality steel tubing and feature 3 in. casters. They're designed to hold 850 lbs. and come with a black powdercoat finish. The stands are ideal for engine rebuilds, swapping, prep before installation, and more. Models are available for different engine types; select the stand best-suited for your needs.
( 78 )
$102.99
ICT Billet oil pump alignment tools are the thing you need when removing an oil pump. Perfect when doing a cam swap, these tools mount above the existing oil pump and make it an easy reinstall when putting the oil pump back in the engine. No need to worry about if the oil pump is straight with ICT Billet oil pump alignment tools.
( 3 )
$58.99
COMP Cams' 7.3L Godzilla cam phaser socket tool (5475) is required to remove the camshaft phaser bolt on Godzilla engines. For those DIYers looking to upgrade the camshafts on the 7.3L Godzilla, this socket has proven difficult to find. The sturdy 16-point, 22mm socket is made to fit a 1/2 in. drive ratchet.
( 1 )
$32.95
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$22.99
Lisle Duramax flexplate holder and socket kits are designed to lock flexplates in place when removing the harmonic balancer on 6.6L Chevrolet Duramax diesel engines with an Allison automatic transmission. They save time by locking the flexplate at the transmission instead of having to remove the starter for water pump replacement. Simply remove the metal spring-loaded inspection plate on the bottom of the transmission, and slide the tool into the opening toward the engine--with the top of the tool engaging the teeth of the flywheel. Use the included 36mm 12-point socket with 3/4 in. square drive to remove the harmonic balancer bolt and retorque upon installation.
( 24 )
$38.99
Our Summit Racing™ camshaft installation handles for GM LS and Chevy V8 and 90 degree V6 engines feature a hex design that provides a solid grip for camshaft installation and removal. Choose from the economy handle for the early Chevy V8 or the deluxe handle that works on Gen III/IV LS engines and also Chevy V8's.Installation bolts are not included on deluxe model.
( 42 )
$42.99
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
These SPC Performance sleeve pullers are designed to remove rusted or seized bushings. They have been specially manufactured to work with offset or angled bushings and their single-head style eliminates breaking the ears off of the sleeve. Available for most 4-wheel drive trucks, these SPC Performance sleeve pullers will help you with your vehicle's alignment.
( 1 )
$124.99
—
$161.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
