Availability
Showing In Stock Items. Show All 108 Items.
Cal-Van Tools inline dowel pin puller sets are designed to extract dowels without the use of a slide hammer. Eliminating the slide hammer saves cost—as well potential hand injury. Just use the appropriate size adapter over the dowel, tighten the sleeve, then use the outer sleeve and nut to extract the dowel. This tool set can be used with an air ratchet or traditional ratchet. Cal-Van dowel pin pullers are offered in SAE, metric, and master sets.
( 10 )
$133.99
—
$174.99
Cal-Van Tools coil spring clamps are handy tools, when removal of coil springs through the center is not possible. These 3-piece sets supply heavy-duty clamps that help with the easy removal or installation of springs. The clamps can be set in any position, and they include safety U-bolts.
( 2 )
$79.99
Cal-Van Tools constant pressure tubing cutters make the task of cutting through tubing faster and easier. These tools are spring-loaded to keep constant pressure on the tubing, allowing you to cut through thin-walled steel tubing without having to continually tighten or readjust the cutter. Cal-Van offers a few choices to meet your needs, including a mini-mini tube cutter that works effectively in tight spaces, and can handle the smallest tubing sizes.
( 1 )
$35.99
—
$45.99
Cal-Van Tools master spring compressor sets are handy work companions. These 2-in-1 tools feature their two most popular spring compressors--the master MacPherson strut tool and the coil spring compressor. Each of the sets features built-in safety pins, and they include a spring gauge Acme threaded rod. All pieces are packaged in heavy-duty blow-molded cases.
Not Yet Reviewed
$110.99
Cal-Van Master in-line flaring sets offer a unique, time-saving design that makes your flaring chores easier to accomplish. First, the slender, low profile allows you to make flares on the vehicle and in tight spaces. Second, the design locks the adapter's cone and tube in a perfect line, making accurate factory flares every time with less risk of breaking adapters. Lastly, with the clamp and set screws putting pressure directly over the tube, you greatly reduce the chance of the tube slipping from the clamp. Cal-Van Tools Master in-line flaring sets include these benefits and components to do the following: * Increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping * Flares can be achieved along frame rails or areas in the engine compartment, saving the user time from having to remove components or complete lines to make repairs. * 3/16 in., 5/16 in., 3/8 in. double and single flares * 4.75mm, 6mm, 8mm double and bubble flares
( 7 )
$92.99
Designed for professional auto mechanics as well as for heavy-duty applications, the Cal-Van pilot bearing pullers are built especially for inside pulling jobs—and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. They're also very practical for pulling a motor, generator, and magneto bearings. The pilot bearing puller attachments are designed for use with a threads slide hammer. They insert behind the pilot bearings to allow them to be safely hammered out with the slide hammer. Slide hammer is included with this tool. Order the model with the maximum spread needed for your application.
( 3 )
$38.99
—
$42.99
Cal-Van Tools radiator hose pinch-off pliers are a must-have for mechanics and home garage gearheads. When servicing your cooling system, these pliers let you simply clamp the radiator hose without damaging it—keeping the engine coolant where it belongs, and not on your floor.
( 1 )
$11.99
Cal-Van Tools fuel line pliers will make your hard job easier. These special tools are designed for quick-connect, slide, and lock couplers on fuel lines found on European and domestic vehicles. Cal-Van fuel line pliers feature zinc plated steel construction fitted with comfortable handle grips.
( 1 )
$31.99
—
$33.99
Cal-Van Tools Torx bit socket sets have many uses for many makes of cars and trucks. The bits are made from S2 steel to meet or exceed torque specifications, and feature a 2-piece design that's more durable than a single-piece. Cal-Van sets come packaged in rugged blow-molded storage cases.
Not Yet Reviewed
$60.99
Cal-Van Tools pistol-grip flaring tools allow you to get a handle on your brake flaring chores. These special tools feature a convenient, comfortable handle—and the ability to flare 3/16 in. and 4.75mm tubing for bubble or double flares. Have better control when flaring tube with Cal-Van pistol-grip tools.
( 6 )
$56.99
Cal-Van Tools front-end service kits include five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles. These kits contain large and small Pitman arm pullers for ball joint applications, 3 different tie rod pullers, and 2 ball joint separators. Everything comes packed inside a sturdy blow-molded case.
( 1 )
$126.99
Cal-Van Tools bushing driver sets will remove or install bushings from 3/8 in. to 1 3/8 in. found in cars, trucks, tractors, construction equipment, electric motors, and many other components containing bushings. The sets include 16 bushing adapters and three driver handles packaged in a blow-molded storage case.
Not Yet Reviewed
$59.99
Cal-Van Tools Antenna and Radio socket sets include the tools necessary to bring in the air waves. The 11-piece kits are packaged in convenient molded cases. Cal-Van antenna and radio sets include: * Universal antenna wrench * Ford radio removal tool * Deep sockets to remove and install the tamper-proof radio nuts from many GM, Chrysler, and other aftermarket radios * Antenna nut sockets that cover most import and domestic antenna nuts
Not Yet Reviewed
$49.99
Cal-Van Tools 7-ton bar-type puller bearing separator sets are ready for larger applications with greater reach (8 to 16 in.). These sets include 4 in. bearing splitter, 2 sets of hex push-puller legs, and an 8 in. bar-type puller head mated with a custom thread forcing screw. Cal-Van 7-ton bar-type puller bearing separator sets come inside durable storage cases.
Not Yet Reviewed
$146.99
Cal-Van Tools ignition point files are made of super hard high-quality steel with a Rockwell hardness of 65. These double-cut ignition files are guaranteed to file tungsten and platinum contact points. Clean your electrical contacts with Cal-Van ignition point files.
Not Yet Reviewed
$5.99
Cal-Van Tools drain plug repair kits work with drain plugs commonly found in, but not limited to GM, Ford, and Mazda aluminum oil pans. The kits include drill bit, counter bore, tap, driver guide, insert tool, and 5 to 12mm length inserts. The inserts allow for the original drain plug to be used instead of an aftermarket plug at a different size.
Not Yet Reviewed
$116.99
Cal-Van Tools 90-degree gearless angle drives allow easier use and easier reach. Made from steel and finished in chrome, these angle drives replace your hard-to-use universal adapters, and permit access to hard-to-reach areas. Cal-Van gearless angle drives exceed ANSI specifications for torque maximum of universal socket adapters.
Not Yet Reviewed
$22.99
—
$24.99
Cal-Van Tools tailpipe cutters work well in tight spaces, and they only need a quarter-turn to cut! The cutters feature 13 large-diameter (19mm) cutting wheels that cut deep into exhaust pipes without leaving burrs. Cal-Van Tools tailpipe cutters are ideal for heavier-walled, European-type exhaust pipes.
( 2 )
$54.99
Cal-Van Tools inline flaring tools are available in SAE, metric, and auto-specific sets—and they all make perfect flares every time! Their low-profile design enables you to flare copper or soft steel tubing in tight spaces, and it also allows you to use a ratchet or wrench. Cal-Van patented flaring tools make perfect single or double flares easily. The double clamp and hex body keeps your tube from slipping, flares centered, and makes the job of flaring easier.
( 2 )
$37.99
—
$41.99
Cal-Van Tools quick-change wheel stud cleaner kits are designed to be used with a cordless drill and allow easier cleaning of studs. The kits include a 1/2 in. drive adapter and six brushes in sizes: 12mm (7/16 in.), 13mm (1/2 in.), 14mm (9/16 in.), 16mm (5/8 in.), 22mm (7/8 in.), and 28mm (1 1/8 in.).
Not Yet Reviewed
$48.99
Cal-Van GM thermostat wrenches are efficient solutions to removing thermostat housings. You need to replace the thermostat of your V6, which means that you have to remove the housing. And where's the housing bolt? On the bottom, of course. Now, Cal-Van Tool GM thermostat wrenches will allow you to reach that almost inaccessible bolt--without removing other parts. These innovative and durable tools are uniquely shaped, so you can remove and install the housing in a fraction of the normal time. They are 13mm, 12-point wrenches with special bends specifically designed for your GM V6 thermostat housings.
( 1 )
$14.99
Cal-Van Tools ratcheting hose cutters can be used on a multitude of hose, pipes, and cables. Their ratcheting action makes cutting easy, and the tools feature quick-release mechanisms to quickly and easily open the pliers—as well as locking mechanisms in the handle for safe storage. They will cut hose up to 1 in. in diameter. Cal-Van Tools ratcheting hose cutters will work on: * Industrial air hose * Multi-purpose hose * Heater and washer hose * Vacuum hose * Non-metallic fuel line hose * PVC pipe * Battery cables * Copper tractor-trailer cable * Non-metallic air brake hose
( 1 )
$27.99
Cal-Van Tools adjustable bearing and seal drivers feature an all-in-one design that eliminates the need for a driver and different size adapters. The locking screw holds the adjustable jaws in place for one-hand use, and the 4-stepped jaws quickly adjust to accommodate bearing races and seals from .708 in. to 3.543 in. (18mm to 90mm). Cal-Van adjustable bearing/seal drivers are built with durable, sturdy aluminum construction, and equipped with steel-capped striker shaft handles.
Not Yet Reviewed
$66.99
Cal-Van Tools trim fastener and molding remover sets provide different sizes and styles of specialty implements to help with the removal of trim, and so much more! Made from durable, non-damaging materials, these Cal-Van tools have multiple applications for inside and outside your vehicle. From trim fasteners to molding, to wheels hubs, liners, and shrouds, these handy tools are a must for your toolbox.
( 1 )
$21.99
—
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
