Availability
Showing In Stock Items. Show All 39 Items.
These Steck door hinge bushing removal tools offer you an easier way to remove those stubborn bushings. Steck manufactures these tools from super-tough alloy steel, which breaks fewer bushings. Their offset design allows for easy access to all door hinges and helps to align bushings when you're reinstalling them.
( 4 )
$20.99
Use hydraulic pressure and Lisle pilot bushing removal tools to remove brass and bronze bushings. Made of case hardened steel, they are strong and durable to provide lots of dependable service time. Simply, screw the self-tapping tip 2-3 threads into the brass or bronze bushing and then pump out the bushing with a grease gun. Remove clutch pilot bushings with Lisle removal tools.
( 21 )
$13.99
If you need to replace OEM control arm bushings and don't have a press, make RideTech control arm bushing removal and installation tools your solution. These tools are made from top-quality materials and aid in the removal of stock upper and lower control arm bushings and the installation of RideTech Delrin bushings--with just simple hand tools.
( 56 )
$80.00
OEM Automotive Tools upper control arm bushing service sets enable you to easily remove and install press-in type bushings on most domestic rear wheel drive vehicles. Their mechanical power-screw tool quickly extracts worn bushings and installs their replacements without damaging the control arm. The 9-piece sets include C-frame, screw assembly, remover and receiver collars, and various size adapters. All of the accessories are packaged in a durable plastic storage case.
( 2 )
$174.99
Cal-Van Tools bushing driver sets will remove or install bushings from 3/8 in. to 1 3/8 in. found in cars, trucks, tractors, construction equipment, electric motors, and many other components containing bushings. The sets include 16 bushing adapters and three driver handles packaged in a blow-molded storage case.
Not Yet Reviewed
$59.99
Some tools make transmission work easier. Sonnax's bushing installation tool is one of those must-haves that will make life easier. They are quality built and designed to work with specific Sonnax one-piece rear case bushings and their Performance Pack. Boost your toolbox's performance with Sonnax bushing installation tools.
Not Yet Reviewed
$64.99
Most old and new suspension bushings are pressed in and out with old bearing shells, sockets or just anything you can find. This creates a safety issue, given that heat-treated steel will shatter under stress. The assortment of sleeves that make up the Whiteline bushing and bearing press tool kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Whiteline polyurethane bushings and aid in other workshop pressing requirements. These kits are ideal for use on bearings, bushings, spherical joints, or other applications. They can be used on a workshop press or directly on a vehicle. Less force is required to remove / install bushings, bearing and joints—making use easy even without power tools. Kit contents: * 18 x sleeves: 28mm-113mm diameter (5mm increments) * 4 press plates * 4 pulling spindles covering these bolt sizes (M10, M12, M14, M16) * Rolled thread on spindles * Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)
Not Yet Reviewed
$499.88
Most old and new suspension bushings are pressed in and out with old bearing shells, sockets, or just anything you can find. This creates a safety issue, given that heat-treated steel will shatter under stress. The assortment of sleeves contained in this Nolathane universal press/pull tool kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Nolathane polyurethane bushings and aid in other workshop pressing requirements.
Not Yet Reviewed
$249.87
Make servicing your watercraft easier using one of these bearing driver heads from Sierra Marine. The driver head tools are designed for removing and installing a needle bearing in forward gear; they also remove and install seals and bearings in gimbal housings. Sierra offers the bearing driver heads in several options for use with Mercruiser MC-I, R-MR, and Alpha I drive units.
Not Yet Reviewed
$14.99
—
$19.99
Make the removal and installation of control arm bushings easier with SPC Performance control arm bushing press adapters. These adapters must be used with the SPC Performance ball joint press (sold separately).
Not Yet Reviewed
$27.99
Having the right tools to work on your boat certainly makes life easier. Sierra Marine gimbal bearing installers will deliver reliable performance. They're made from steel with a protective black oxide coating. These installers are designed for use with Sierra alignment tools.
Not Yet Reviewed
$57.99
Motion Pro designs and manufactures high-quality specialty tools for motorcycles, ATVs, and UTVs. These puller tools safely remove and install the upper spherical bearing on rear shocks. They fit 24mm O.D. bearings. The shock bearing pullers feature durable hardened tool steel construction with a corrosion-resistant black oxide coating. They're laser-etched for easy identification. The reversible puller cup with cutaway fits a wide variety of shock reservoir and compression adjuster configurations. Tools include a durable brass thrust washer.
Not Yet Reviewed
$40.99
These SPC Performance 5 in. tie rod pullers are designed to remove old tie rod ends with a straight, fast, firm pull. They feature a 2 1/4 in. reach and a 2 1/2 in. spread and can also be used for pressing bushings from control and trailing arms.
Not Yet Reviewed
$105.99
Do you have a transmission rebuild to do? Don't go it alone--allow Pit Posse to assist in the "big" project with their blind bearing and bushing remover sets. These sets can also be used for wheel bearing removal, making them must-have tool accessories for transmission builders and mechanics alike. These sets consist of 30, 25, 20, 17, 15, 12, 10, and 8mm collets, a 2 lb. sledge hammer, and a crossbar-type shaft to allow for easier collet removal.
( 8 )
$104.99
Cunningham Machine door spring tools are very useful when it's time to change any portion of your vehicle's doors. Whether it's bushings, rollers, or just the springs themselves, Cunningham's door spring tools will save you time and headaches.
Not Yet Reviewed
$16.99
K Tool pilot bearing pullers help you remove flywheel pilot bearings in tight spaces where a slide hammer just won't fit. These versatile specialty tools can also work as bearing and bushing pullers for generators and starters. Order the style preferred for your applications.
( 34 )
$24.99
—
$64.99
Removing the pilot bearings and bushings from the clutch flywheel doesn't have to be a battle between you and your engine. The heavy duty 1 1/2 in. fingers of the Powerbuilt pilot bearing puller grab tight to the bearing, making it easy to turn the center screw until the bearing comes loose from the flywheel. The handle included in these kits help you keep the puller steady as you tighten down the screw. Product details: * Removes the pilot bearings and bushings from the clutch flywheel * Set includes puller assembly, center bolt, finger nut and bolt, 1 1/2 in. fingers * Durable storage case with step-by-step instructions * Precision-built to meet or exceed ANSI and/or ASME standards * Strong and dependable enough to last a lifetime
( 3 )
$32.99
SPC Performance bushing press sleeves are designed for use with SPC's ball joint press. They can easily remove the stock control arm bushings and install aftermarket bushings. The sleeves are made from hardened steel for durability, and available in a variety of configurations for use on numerous makes and models.
Not Yet Reviewed
$74.99
—
$82.99
Save time and frustration with these OTC bearing cup removers. OTC bearing cup removers make servicing hubs on small FWD vehicles much easier. They work great for pulling internal bearing cups, seals, and bushings.
( 6 )
$62.99
These OTC bearing cup removers are great for servicing hubs on front-wheel drive cars. The cone design of the OTC bearing pullers holds the jaws in place, allowing for an easy removal. The OTC bearing cup removers are great for pulling internal bearings, cups, seals, and bushings.
Not Yet Reviewed
$167.99
Astro Pneumatic Tool Company locking pliers slide hammer pullers are designed to remove everything from cotter pins to old seals and bushings by using the universal puller to lock and hammer onto objects. The slide hammers quick detachable swivel end allows for adjusting and locking pliers onto the subject then attaching sliding hammer for removal. The threads in these units will thread into most common locking pliers and vice grips for use with your existing tools as well. For quality-built tools to get the job done, be sure to choose tools from Astro Pneumatic Tool Company.
( 3 )
$51.99
S&G Tool Aid offers a wide variety of pneumatic chisels—including scapers, claw rippers, double edge cutters, rivet busters, "V" spot weld breakers, bushing removers, tailpipe and muffler cutters, flat chisels, and many others. Order them individually or in combo packs. The chisels are made from alloy steel and include the most widely used pneumatic models for automotive and auto body repair.
Not Yet Reviewed
$30.99
K Tool pick tools make it easier to remove O-rings, split pins, seals, bushes, and loose parts. An assortment of styles is available with brightly colored neon handles marked with part number and size for easy identification. K Tool offers pick tools individually and in sets.
Not Yet Reviewed
$14.99
OTC proper size drivers are perfect for the removal of seals, bearings, or any bushing installation jobs. These master driver sets include three handle sizes and 65 discs, ranging from 1/2 to 4 1/2 inches in diameter.
Not Yet Reviewed
$1,427.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
