Availability
Showing In Stock Items. Show All 46 Items.
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 8 )
$45.99
OTC axle shaft seal installers for are designed for use on select Ford F-Series Super Duty trucks that have a vacuum-operated front axle. The drivers are built into the installers, saving you time and money! They correctly install the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage.
( 27 )
$143.99
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. RideTech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. RideTech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
OTC fuel tank lock ring wrenches are a universal design that allows tools to fit fuel tank lock rings on a range of vehicles. Used with a drive ratchet or breaker bar, they easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
( 12 )
$87.99
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$21.99
Astro Pneumatic Tool Company Subaru ball joint pullers are perfect for pulling difficult to remove, seized, rusted, and/or corroded bolt-in Subaru ball joints. They're designed for easy use with vehicles on jack stands using a deep 24mm socket and impact or hand wrench or use included 5/8 in.-18 thread adapter with any common slide hammer. Their unique sliding pin, non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage.
( 4 )
$32.99
Stay prepared on the road with Roush Mustang trunk tool kits. These kits ensure you will never be caught without the essential tools needed for your Mustang. They include high-quality wrenches and a 3/8 in. socket set for the most common bolt sizes found in the 2015-21 Mustang. Also included are a flashlight, needle nose and slip-joint pliers, an accurate tire pressure gauge, Mechanix gloves, and a multi-bit screwdriver. The tool kits come with a trunk-mount toolbox fitted with a foam liner with cutouts for each tool. They feature Roush branding and they look as though they came from the factory.
Not Yet Reviewed
$589.99
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$78.99
Lisle heavy-duty pitman arm pullers are designed for the large pitman arms on Ford 250 and 350 trucks. The jaws are forged and heat-treated for strength. Simply position the puller jaws under the pitman arm, and turn center screw to remove. Lisle heavy-duty pitman arm puller specs: * Opening is 1.70 in. * Inside length is 2 5/8 in. * Width is 3.08 in. * Overall length is 3 9/16 in.
Not Yet Reviewed
$35.99
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 75 )
$7.95
Install your ACT clutch kit easier and more accurately with the proper ACT clutch alignment tools. These alignment tools will make quick work of centering the clutch disc and keeping it stationary with the flywheel as you install the pressure plate over it. Make your clutch installation simple and precise using ACT clutch alignment tools.
( 44 )
$4.00
—
$6.00
Summit Bucks
These Performance Tool spindle nuts wrenches make quick work of stubborn spindle nuts. These wrenches feature chromoly steel and black oxide sockets that fit most 2WD and 4WD light truck applications.
( 57 )
$29.99
McLeod clutch alignment tools allow you to accomplish the tricky task of aligning your clutch disc between the pressure plate and flywheel before the pressure plate is bolted down. Save yourself time and frustration--use McLeod's clutch alignment tools to ensure that everything is properly lined up for a smooth, hassle-free installation.
( 8 )
$4.95
Eibach Pro-UTV spanner wrench kits are premium performance accessories. These tools provide positive engagement with an anti-slip grip. They are engineered to work with each model UTV shock collar.
( 2 )
$22.00
OTC ball joint separators will provide an easier way to remove ball joints from spindle support arms. These specialty tools come in adjustable or fixed ball joint separator styles that are designed to service a variety of vehicles. Choose OTC—quality tools that can help you get your job done efficiently.
( 12 )
$172.99
These SPC Performance ball joint presses were specifically designed to remove the original equipment ball joints on smaller cars when installing SPC Performance sliding ball joints. Now you can remove the ball joint from the front upper control arm without removing the control arm from the vehicle. These SPC Performance ball joint presses are packaged in a convenient blow-molded plastic case for storage and easy identification.
Not Yet Reviewed
$137.99
OTC ignition switch housing alignment tools are for use on select Harley-Davidson® bikes to ensure the housing is properly aligned as the retaining screws are being torqued. Correct alignment can extend the life of the ignition switch. Applications include select 2003 and later FL Touring models, and select 2002 and later V-Rods. The tools have an anodized aluminum construction. For a simple repair or the most complex drivability concern, these award-winning OTC tools can universally solve problems faster, and at better value, than any other product line available.
Not Yet Reviewed
$59.99
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
SPC Performance bushing press sleeves are designed for use with SPC's ball joint press. They can easily remove the stock control arm bushings and install aftermarket bushings. The sleeves are made from hardened steel for durability, and available in a variety of configurations for use on numerous makes and models.
Not Yet Reviewed
$74.99
—
$82.99
Dorman multipurpose funnels are available for any number of automotive maintenance applications. They're constructed of quality materials for longevity and are available in a range of sizes. Direct your fluids precisely into their reservoirs without spilling onto other engine parts—economical Dorman funnels make it possible!
( 9 )
$6.99
For those hard to find parts, Pit Posse has you covered. These rear axle nut wrenches are made from hardened vanadium steel, feature a contoured rubber grip, and it even has a 3/8 in. drive torque wrench opening. When you need the right part to finish the job, turn to Pit Posse.
Not Yet Reviewed
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
