Availability
Showing In Stock Items. Show All 45 Items.
Experiencing poor fuel pressure? Summit Racing™ fuel pressure tester kits will diagnose drivability issues caused by out-of-spec fuel pressure. These universal kits feature a 0-100 psi 2 1/2 in. gauge with long hose for reaching the test point, a pressure relief button, and a gauge boot to protect both the gauge and your vehicle's finish. Kits also include a step-by-step guide to facilitate easy testing.
( 5 )
$59.99
Motion Pro cleaner kits will help you wipe out the dirt and gain better performance. These cleaning tools flush out and clean debris and deposits from inside your fuel injectors. They're made from durable anodized billet aluminum and include a 9 V battery, along with the appropriate pigtail. Kits are available to fit most OEM Nippon Denso and HYB fuel injectors, as well as kits for EV1 injectors used on late model Harley® engines and EV6 injectors used on older engines. Armed with an aerosol can of fuel injection cleaner (not included) and Motion Pro cleaner tools, you're equipped to eliminate performance-robbing dirt.
Not Yet Reviewed
$204.99
Change jets and repair carburetors without spilling fuel! Pit Pal designed these tubes to drain both bowls when removing the carb bowl screws. Pit Pal manufactures these round tubes from quality aluminum to ensure great looks and durability. The tubes' tapered end captures fuel without spilling.
Not Yet Reviewed
$47.99
Improve vehicle mileage performance using one of these S.U.R.&R. fuel injection cleaner kits. They are designed to give a powerful, complete cleaning of fuel injectors, intake valves, and fuel passages. The advanced technology cleans more thoroughly than aerosol methods. S.U.R.&R. hoses connect to any source of air in the shop, with the quick-connector ends making attachment a breeze. The kits hold up to an 18 oz. canister of cleaning solution, which can be used on both gasoline and diesel engines.
Not Yet Reviewed
$358.99
Improve your vehicle's mileage performance with S.U.R.&R. fuel injection cleaner canisters. They help provide a powerful, complete cleaning of fuel injectors, intake valves, and fuel passages--employing advanced technology that cleans more thoroughly than aerosol methods. Use S.U.R.&R. hoses to connect to any source of air in the shop, and blast away on both gasoline and diesel engines using S.U.R.&R. fuel injection cleaner canisters full of your favorite solution!
Not Yet Reviewed
$192.99
S.U.R.&R. fuel injector cleaner components gives you everything you need to replace or repair your fuel injector cleaners or canisters. From coupler plugs to compressors, replacement hose assemblies, and more, S.U.R.&R. has you covered. Order the fuel injector cleaner components you need.
Not Yet Reviewed
$5.99
—
$93.99
OTC fuel injection cleaner canisters are designed for direct fuel rail and injection cleaning. OTC's recommended process runs your engine with a strong cleaning solvent, like their Pro Inject-R Kleen (sold separately), which is introduced directly into the fuel rail where maximum benefit is achieved. The debris that is loosened or dissolved is then combusted and ultimately removed through the vehicle's exhaust system. The hydraulic cylinder is machined from stainless steel, has a 22 oz. capacity, and is able to handle pressures up to 30,000 psi! The full-size cap makes adding solvents easy and spill proof. A fuel injection application manual and fluid transfer hose are included.
Not Yet Reviewed
$269.99
OTC fuel injector pullers thread onto slide hammers with 5/8 in.-18 thread, including most OTC slide hammers, to easily remove fuel injectors from an engine. Simple to use, the puller legs align around the injector base and the collar is slid down to firmly grip the injector. Attach your slide hammer to the puller to pull the injector from its seat.
Not Yet Reviewed
$154.99
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 1 )
$48.99
Lisle fuel injector remover and installer kits come with three application specific attachments. Remove the shoulder bolt to switch between the attachments. The injector puller can handle a variety of injectors that are commonly found in Cummins and Duramax engines. The two-jaw design firmly grips the injector while it is being removed by the slide hammer. These kits save time and reduces the likelihood of damaging the injector or head.
Not Yet Reviewed
$200.99
OTC GM Duramax injector pullers make servicing your injectors easier than ever. With every diesel vehicle, service is important to keep them running strong and getting the fuel economy that you demand. OTC came through for your GM Duramax with their injector pullers. Simply install on the injector that needs to be pulled, use a box end wrench to turn the tool until the injector releases from the seat. It does not get much simpler than that.
( 3 )
$68.99
—
$189.99
OTC injector retaining clip replacers ensure proper retention of the injector to the rail. These plier-type tools remove and install the injector retaining clips without over-spreading. For specialty GM service tools, OTC's lineup includes over 40 tools that will make maintenance and repairs easier.
Not Yet Reviewed
$176.99
OTC injector seal installer and sizer adapters ensure replacement injectors and seals are installed correctly. Two different kits are available. Choose the appropriate one for your application. OTC kit 6757 installs the PTFE seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal into the groove on the injector tip. The sizer goes over the seal to compress it back to the correct O.D. to allow installation into the cylinder head. OTC kit 6756 installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. Two seal installation pilots for each groove, a seal installer driver, and a compression sizer is included.
Not Yet Reviewed
$158.99
—
$179.99
OTC Navistar injector sleeve remover/installer tools is a 2-piece set that helps you easily remove and install injector sleeves on Navistar diesel engines. The threaded remover fits onto your slide hammer to pull out damaged sleeves and the installer properly seats new sleeves in the cylinder head.
Not Yet Reviewed
$113.99
Improve gas mileage, engine performance, and decrease harmful emissions with the S.U.R.&R. intake system cleaner canisters. They are designed to clean gum, varnish, and carbon deposits from air intake systems, EGR valves, intake valves, combustion chambers, and oxygen sensors. Easy to use, simply fill canister with air intake cleaning solution and connect into a vacuum line. The cleaner canisters provide a more thorough cleaning than other methods, and feature a liquid filled gauge for accurate vacuum reading and monitoring chemical flow. With the S.U.R.&R intake system cleaner canisters, you will have a proven and more cost-effective solution for cleaning a wide range of components for improved engine performance.
Not Yet Reviewed
$102.99
These OTC Ford injector remover and installer kits remove and install fuel injectors without damaging the injector or cylinder head. OTC manufactures these kits to accept a standard 3/8 in. drive.
( 5 )
$74.99
—
$155.99
Tracerline UV fluorescent detection dye is an OEM-grade dye specifically designed for any oil-based fluids, including fuel, gear oil, power steering, or engine oils. This versatile yellow-green dye is a patented, full spectrum formulation that works with all leak detection lights. The dyes are available in a variety of sizes and quantities--and are perfect for leak-detection and diagnostics in automotive repair shops.
( 1 )
$25.99
—
$601.99
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
Not Yet Reviewed
$177.99
Now you don't have to spill fuel all over the engine when removing fuel-bowl screws to service Holley carburetors. Moroso carburetor drain cups use a special channeled handle to catch dripping fuel and direct it into the holding cup. They are made from fuel resistant polyethylene
( 7 )
$17.99
Jones Racing spark plug indexers make it easy and quick to index all of your spark plugs! Studies have shown that 1 to 2 percent of your engine's horsepower can be lost due to poor spark direction. These spark plug indexers can help you get that missing performance back by allowing you to obtain the optimal combustion efficiency in each cylinder with consistency throughout. Leave the competition guessing, and order one of these spark plug indexer tools from Jones Racing! Product features: * Billet aluminum construction * 14mm thread * Helps you line up the plug's electrode so it doesn't shield the spark from the air/fuel charge or obstruct the flame forward into the chamber * Available in 8- or 9-hole configurations * 9-hole configurations make it easy to install new plugs with your preferred setup * Also useful when storing, washing, or changing your engine
( 1 )
$54.43
Besides having a reliably tuned nitrous system, properly reading your spark plugs is one of the keys to fast performance. Nitrous Outlet spark plug readers enable you to read your spark plugs for air/fuel, timing, plug temperature, and detonation. They're designed to magnify and illuminate the hard-to-read area on the top portion of the spark plugs. Each reader tool comes with a handy storage case.
( 4 )
$34.99
—
$40.99
COMP Cams camshaft checking tools work with any of your standard dial indicators. The cam checking tools slide down into the lifter bore and ride on top of the camshaft in order to help measure lobe lift and base circle runout. The tools are double-ended and feature an O-ring on each end to securely hold them in the lifter bore and come complete with two followers—one for flat tappet or hydraulic cams and one for roller cams. With COMP Cams camshaft checking tools, you can accurately measure lobe lift for your GM, Ford, Chrysler, or Top Fuel. These quality tools are much easier to use and more precise than using a magnetic indicator base when degreeing a cam and help ensure the camshaft is installed correctly and within specifications, which is vital for long-term reliability.
Not Yet Reviewed
$160.95
Automotive fluid leaks not only cause a mess, they can also lead to engine damage if left unchecked. Tracerline application-specific Dye-Lite leak detection dyes make pinpointing leaks quick and easy in nearly all oil-based fluid systems: gasoline and diesel engine oil, gasoline, diesel fuel, transmission fluid, power steering fluid, hydraulic, cooling, and lubrication fluids. Don't let money leak out of your pockets, when the diagnosis can be as simple as using a dose of Tracerline application-specific Dye-Lite leak detection dye!
Not Yet Reviewed
$32.99
Moroso carburetor work stands offer the ideal perch for you to service a vital engine part. Blending the proper amount of air and fuel to power your vehicle is a big responsibility, so you need to be able to reach every inch of the carburetor for fine-tuning. These cast aluminum stands are ideal for maintaining Quadrajets, as well as standard and spread-bore units from Holley. The specialty work stands feature an open center and four convenient mounting pegs. Mechanics and do-it-yourselfers, let Moroso make your job easier!
( 13 )
$41.99
—
$57.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
