Availability
Showing In Stock Items. Show All 70 Items.
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 192 )
$81.99
Summit Racing™ LS damper pin drill fixtures give you everything you need to drill and pin your harmonic damper on your non-keyed LS or LT engine. They're designed for OEM and similar aftermarket dampers when using belt driven superchargers. Kit includes a heat-treated drill fixture, 4 dowel pins (1/4 in. x 1 in.) and a 1/4 in. cobalt drill bit.
( 12 )
$71.99
Put down the hammer and step away from your engine! Summit Racing™ has a better, easier way to put a harmonic balancer on your engine—one of these GM LS installation tools. These simple-to-use quality tools provide you with a hassle-free option to complete the setup. They're available in different styles for a variety of applications. Having the right tools for the job can make your life easier. Order the Summit Racing™ harmonic balancer installation tool that best suits your needs.
( 166 )
$51.99
Make valve-train servicing on your engine easier with Trick Flow® valve spring compressors. These specially made tools can remove the valve springs with cylinder heads mounted to the engine block, even on engines already installed in the vehicle. And, they make track changes quicker! Trick Flow® valve spring compressors are a must for servicing valve springs, retainers, camshafts, and valve seals.
( 160 )
$83.99
The timing cover and rear cover on GM LS Series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft. This often leads to annoying leaks at the front damper seal and rear main seal. Summit™ has the solution to leak-free LS engine builds. Summit Racing™ Pro LS cover alignment tools locate or center the seal openings on the front or rear cover when it's installed, ensuring the seal is centered on the crankshaft, preventing leaks and allowing easier installation of the seals.
( 13 )
$45.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 9 )
$99.99
—
$229.99
Summit Racing™ Manufacturing and Engineering harmonic balancer puller and installers feature a roller thrust bearing, a puller plate milled to accept a variety of bolt sizes, and CNC-machined components with a black oxide finish. They come complete with four heat-treated 4140 chromoly installer studs, puller bolts, instructions, and a storage case. The installers include our Summit Racing™ harmonic balancer wrenches to rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 16 )
$234.97
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$200.99
OEM Automotive Tools GM harmonic balancer pullers save you time when removing harmonic balancers without tapped holes. They eliminate the need to remove the radiator. Many balancers found on GM and Mopar vehicles do not have tapped holes; these tool feature a "clip-in" design, allowing removal without bolting the puller to the balancer.
( 15 )
$65.99
Proform harmonic balancer puller and installer tools are equipped with a roller thrust bearing for easy installation. They may also be used for steering wheel installation and removal. These heavy-duty professional tools have a maximum recommended torque of 150 lbs.-ft. The tools are available in universal and application-specific models.
( 67 )
$119.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$248.99
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 73 )
$93.99
ICT billet LS crankshaft pin drill fixture kits allow you to effortlessly drill and pin your GM LS Series crankshaft and balancer to prevent slip when using a supercharger. Made from high-grade steel, the bits easily drill into the crank and balancer.
( 9 )
$109.99
Summit Racing™ oil primer sockets assist with the proper oiling of your engine. These aluminum sockets feature a 3/8 in. drive—and to use, simply slip onto the crankshaft and attach a drill to manually spin the oil pump, lubricating all the engine parts. These accessories are designed for use with aftermarket timing sets with a removable oil pump drive gear. Order the sockets recommended for your year/make and engine application.
( 17 )
$59.99
—
$66.99
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 84 )
$124.95
—
$160.95
Summit Racing™ harmonic balancer pullers are ideal for quick and easy balancer removal without needing to remove the radiator. The puller jaws attach directly to the harmonic balancer, eliminating the need for fasteners or tapped holes in the balancer. These pullers are constructed of steel with a black phosphate coating.
( 1 )
$49.99
LSM Racing has developed the standard for changing valve springs with their innovative design. These LSM Racing valve spring removal tools are simply the best quality and easiest to use tools available. They make changing valve springs a fast and simple one-person job.
( 108 )
$275.99
ICT Billet harmonic balancer installation tools thread into your crankshaft and push the crankshaft pulley into position. They are recommended to anyone who is a DIY individual to make this job easier to complete.
( 74 )
$24.99
You know what a chore it can be to remove high-pressure valve springs. These Proform valve spring compressors are designed to facilitate valve spring removal while the cylinder heads are still on the engine.
( 116 )
$68.99
—
$81.99
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
Not Yet Reviewed
$177.99
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$40.79
—
$113.99
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$359.99
—
$499.99
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 1 )
$48.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
