Availability
Showing In Stock Items. Show All 77 Items.
When your work day calls for the big guns, bring in heat to match--Mr. Heater forced air kerosene heaters. Mr. Heater is one the most well-known (and rightly so) portable heater manufacturers. Their Contractor Series forced air kerosene heaters will get you through the workday with economical, efficient warmth. Mr. Heater forced air kerosene heaters are ready to use and built tough from heavy-duty steel to last a long time and are available in several styles to suit your needs. Some heater models offer illuminated on/off switches, fuel gauges, cord wraps, easy-off gas caps, overheat safety shutoffs, thermostats, and much more. Get the maximum instant heat for your application; choose Mr. Heater forced air kerosene heaters.
( 8 )
$1,249.99
On Sale
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$7,204.82
$3,522.49
—
$6,844.58
On Sale
The BendPak 10APX-181 Series 2-post lifts offer exceptional direct-drive lifting performance with the convenience of wide or narrow installation, wrapped up into one configurable package. These 2-post lifts are engineered to cater to mechanics who spend their days in challenging positions. Say goodbye to discomfort and hello to a premium workspace that accommodates technicians with the best equipment for the job—especially for those tackling larger vehicles. True to the 10AP Series, these lifts feature a robust 10,000-lb. lifting capacity, an expandable top beam, and BI-METRIC arms to suit virtually every vehicle lifting requirement—symmetric or asymmetric. The simple, yet highly sophisticated design of the 10APX-181 Series lifts keep service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. Equip your shop with the latest in lifting technology from BendPak—and experience the difference firsthand. Key features and specs: * High tensile-strength steels, low-profile arms, and meticulously designed swing arms reflect BendPak' commitment to safety-critical enhancements, empowering technicians to tackle heavier EVs with confidence * Lifts are not only sturdy and secure but also equipped with BendPak's advanced BI-METRIC arms, capable of seamlessly performing symmetric and asymmetric lifting * Uniquely designed BI-METRIC adaptable swing arms offer exceptional flexibility to empower users to configure their lifts symmetrically or asymmetrically, without the need for arm switching—2-in-1 design accelerates vehicle servicing, enabling techs to work more efficiently * Revolutionary Automatic Swing Arm Restraint System (ASARS), engineered to endure the elevated forces exerted during vehicle service—this patented system, constructed with heavily forged steel, locks lift arms securely in place with an impressive load-holding force of over 2000 lbs. * BendPak's patented triple-telescoping swing arms redefine precision lifting offers greater retraction and extension capabilities—patented nesting feature enables seamless inner sliding arm movement, eliminating hindrances and ensuring maximum efficiency in vehicle lifting * Exclusive Low-Pro swing arms redefine versatility, featuring telescoping channels with a shorter profile and dropped-end pad receivers (arms are engineered for optimal under-car access on lowered chassis-height vehicles to minimize the risk of damage to vehicle skirts, running boards, and ground effects) * Stackable adapters and spin-up screw pads provide secure vertical pad placement * Experience flawless lifting alignment with optional double-telescoping screw adapters, fortified with resilient polyurethane pads—these adapters ensure level lifting in all conditions, enhancing technician safety * Optional 2.5 in. and 5 in. stackable adapters further optimize vertical pad placement for secure vehicle support * Patented automatic safety lock system redefines safety and efficiency—designed for automatic engagement during lift rising operations, this system also boasts an ergonomic single-point release for effortless lock disengagement during lift descent
Not Yet Reviewed
$7,495.00
$7,095.00
Baileigh Industrial BS-210M horizontal band saws will quickly become one of your favorite tools. You can control the descent in two ways: manually (with a trigger switch) or with a hydraulic descent feature--usually seen only on more expensive models. With a good mix of features at an economical price, these saws are ideal for small-to-medium machine shops or your garage.
Not Yet Reviewed
$4,135.00
On Sale
Homak parts washers are ideal tools for getting grease and oils off of parts. These sturdy units feature 1.5mm thick legs with a 1.0mm frame for strength and rigidity, large one-piece tanks, a flexible nozzle, and work surface trays. An on/off switch is included with the electric pump, while injuries from fire are reduced thanks to a fusible linked lid arm. Clean parts without all the mess using Homak parts washers.
Not Yet Reviewed
$440.99
$396.89
H&S Autoshot plasma cutters provide the power to genuine and sever cut steel. Available in two models, they feature adjustable output, air purge switch, and adjustable air regulator/dryer with gauge. These professional inverter plasma cutters may include: * Inverter power supply * HSP40 or HSP60 plasma torch (12 ft.) * 200-amp earth clamp * 115 V adaptor plug (40-amp model only) * Spare tips and electrodes * Operator manual
Not Yet Reviewed
$2,507.99
On Sale
EMAX offers industrial 250 Series vertical piston compressors in a variety of capacities and power levels: * Model EMX-ESL05V060V1: The EMAX 250 Series 5 hp 60 gal. 1-stage 2-cylinder, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 19 cfm at 100 psi. It also features an industrial grade 1.1 Service Factor 1740 rpm electric motor, Condor Pressure Switch, manual drain valve, 60 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet. EMAX air compressors are built and tested in Ohio with reliability and durability in mind. * Model EMX-ESL07V080Y1: The EMAX 250 Series 7.5 hp 80 gal. 2-stage 3-cylinder, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 26 cfm at 100 psi. It also features industrial grade 1,750 rpm electric motor, magnetic starter, manual drain valve, 80 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet. * Model EMX-ESL10V080V1: The EMAX 250 Series 10 hp 80 gal. 2-stage V4, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 38 cfm at 100 psi. It also features an industrial grade 1.1 Service Factor 1,740 rpm electric motor, magnetic starter, manual drain valve, 80 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet.
Not Yet Reviewed
$2,435.88
—
$3,707.88
$2,314.09
—
$3,522.49
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 1 )
$2,647.88
—
$4,131.88
$2,515.49
—
$3,925.29
Ranger's CoolCharge A/C recovery and recharging machines make vehicle A/C recovery, recycling and recharging faster and easier than ever! These automatic programmable CoolCharge AC-134 machines are designed to evacuate and recover 95 percent of old coolant and recharges vehicle A/C systems within +/- 0.5 oz. of the desired charge. There's nothing easier than programming the A/C settings, and then walking away to let the Ranger CoolCharge AC-134 machine do its job. Features and specifications: * Meets UL 1963 and SAE J2788 Standards * Refrigerant: R134a * Flushing function for rapid discharge of used coolant * Electric database * Car, truck, SUV, and bus compatibility—Electric/Hybrid vehicles excluded * Automatic oil discharge * Programmable vacuum for faster recharge and recovery * Oil injection: Solenoid/visual * Refrigerant charge: Automatic with electronic scale * A/C Pressure adjustment * Operation record for total convenience—a large display faces upright on the machine and an optional print features lets you provide results for both you and your customers * Automatic CoolCharge is 100 percent programmable, so there's no standing over and babysitting the automated recharge and recovery process—while the machine works, technicians can perform other inspections and truly provide the best possible customer care in your region * Oil that is drained during operation is stored internally in a container, and the simple LCD display will indicate how much needs to be returned to the vehicle system * The filter quality and refrigerant levels are also automatically monitored by the machine—functions will cease in the event the filter is too dirty or the refrigerant level becomes too low to service the vehicle * Massive 12 in. back wheels and lockable 4 in. front casters allow you to easily maneuver the machine virtually anywhere and conveniently lock in place with a foot-activated switch to keep unit stationary while in use * Manual and full auto modes included
Not Yet Reviewed
$5,795.00
On Sale
The Ranger RS-500DS parts washers are designed with professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut-off, stainless steel oil skimmer, and more to demonstrate Ranger's commitment to enhanced performance and productivity. These stainless-steel spray wash cabinets rapidly degrease all of the dirty parts in your garage or shop. From larger truck and SUV engine components, to even your smallest nuts and bolts, the Ranger RS-500DS spray wash cabinets will make your car parts shine like new! Features and specifications: * 50-gallon tank with heavy-duty stainless steel construction * Powdercoat finish specifically designed to resist rust * Neoprene-sealed wash cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping—keeping steam inside creates a better water retention which improves cleaning efficiency * Centrifugal commercial-grade pump/motor combination—made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts (pump and motor is over-designed to last) * Contamination-proof interior welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, and preventing any potential cross contamination that could potentially cause clogging is redirected and filtered out, eliminating downtime, and helping to make maintenance a breeze * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 180 degrees F * Hot cleaning—a nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * Automatic low water shutoff—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable parts tree and components basket is ideal for smaller cleaning components—instantly expands cabinet space and makes cleaning nuts, bolts, and screws as easy as placing them in the basket * Removable tank screen makes monthly maintenance easy, keeping your parts washer clean and ready to go * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm * Heavy-duty non-marring casters are impervious to harsh conditions and roll smoothly without leaving any marks behind—the casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease and have an easy lock and release system that allows you to place your parts washer anywhere in the garage or shop * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * Friction-drive turntable system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components
Not Yet Reviewed
$14,895.00
$14,345.00
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$3,283.88
—
$9,792.28
$3,119.69
—
$9,302.67
Baileigh Industrial MSS-18 metal shrinker stretchers are upgrades from the base entry level model—now with a kick-stand addition so both of your hands will be free to handle the material. Another feature is the separate cast iron housings; no need to switch out jaws if you need change functions. The heavy casting assures a quality function at full capacity, which is 18-gauge in mild steel and 16-gauge in aluminum. Replaceable jaws can be ordered separately, as needed.
Not Yet Reviewed
$1,187.99
Mittler Brothers power drive bead rollers help strengthen sheet metal panels while adding a great look to your project. MB rollers add a hem to the edges of the metal eliminating sharp edges that can potentially cut your hands plus, the bead rollers are power-driven. So, unlike the old-fashioned crank models that required one guy to feed the metal and another to turn the crank, you can operate them yourself. Mittler Brothers power drive bead rollers are available in a choice of throat depths, materials, and variable and constant speed models, so there's sure to be a perfect model for your shop. Mittler Brothers power drive bead rollers offer: * Either billet aluminum or jig-welded steel frames * 100+ bead roll profiles * 1 1/8 in. throat height * Adjustable depth of bead * Oilite bushings for long service life * Variable speed foot pedal operation * Forward/reverse switch * Both shafts driven
Not Yet Reviewed
$1,725.00
—
$1,932.00
JET industrial bench grinders are built to withstand the high volume demands of even the busiest shops. These high-quality machines grind, sharpen, and smooth with equal precision and flawless results. Featuring a heavy-duty capacitor motor and sealed bearings for maintenance-free operation, the grinders come with a pre-drilled base for mounting on stands or work benches, along with adjustable safety shields and tool rests. Other features include: * CSA/CUS certified * Toggle switch with safety key * OSHA compliant * Wheel dresser * 5/8 in. shaft diameter * 3,600 rpm wheel speed * Single phase motor * 115 V * 2 1/2 in. dust port size
Not Yet Reviewed
$549.99
H&S Autoshot HSM 200 Multi-MIG synergic welders are professional systems that provide 200 amps of power for MIG, TIG, and stick applications on either a 115 or 230 V line. They feature voltage, wire speed, amperage, and full synergic scroll-down settings for steel, aluminum, and silicone bronze on a LCD display. The spool gun selection switch, euro-connect flange for torch and spool gun, and lift-arc start foot pedal connector are standard. These kits include: a synergic inverter power supply, 10 ft. HSL 15 torch, 10 ft. 200 amp electrode holder, 12 1/2 ft. HSM 17 TIG torch, 10 ft. 200 amp earth clamp, 12 1/2 ft. foot pedal control, gas regulator with hose, steel welding wire, AK-2 kit, and an operators manual. An optional aluminum spool gun is available separately.
Not Yet Reviewed
$2,154.99
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
—
$7,416.82
$4,327.08
—
$7,045.98
If your general repair shop is looking for a swift tire changer that is fast, safe, and easy to use, the Ranger R80EX is the equipment your shop needs. The Ranger R76LT eliminates some of the add-ons that are specifically made to assist operators with tricky run-flats, low-profile tires, and particularly stubborn beads. Most passenger vehicle and pick-up tires don't have those problems, so this machine's tilt-back design simply offers what you want, and nothing more. The professional-grade R76LT features a large turntable that provides an internal clamping capacity of 30 in. and an external clamping capacity of 26 inches. A sturdy body, rigid 45mm hexagonal vertical shaft and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the likelihood of expensive wheels getting damaged. Bead seating and tire inflation is simple and effortless with Ranger's exclusive TurboBlast portable bead seating system. For ease of use, ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending. Key features and specs: * 3 hp (220 VAC 50-60 Hz) motor * Advanced drive belt system—spreads wear evenly throughout the machine, so belt functionality is not weakened over time, and the entire system is protected by the tire changer chassis * (4) clamps (internal/external) * Dual pneumatic cylinders prevent the equipment from vibrating too much, less movement means less friction— cushions are installed to soften the end of each stroke, preserving the seals, wear bands and piston rods so the whole design is self-lubricating and easy to maintain * Adjustable pneumatic blade * Tilt-Back Tower design * Vertical shaft/Tool head positioning * Inflation system/Inflation gauge and integrated air dump valve * Inflation pressure regulator/limiter * Water Filter * Oiler/Lubricator * Air regulator * Bead tool/Tire iron * Multi-functional alloy-steel mount-demount head—makes it easy to switch between functions without making adjustments. The tool head is gentle on tire beads when removing and replacing tires * Durable nylon mount-demount head is exceptionally good at protecting alloy rims and custom wheels * Large Soap Bucket/Soap brush * Powerful, TurboBlast bead seating system * Tool tray/Bin storage * Motorcycle turntable clamps (optional)
Not Yet Reviewed
$3,994.99
The Ranger RP-30FCH oil filter crusher applies 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. The units manual stainless steel handle is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start operation. Save on waste disposal costs and storage space for your shop with the RP-30FCH oil filter crush press from Ranger Products. Specifications of the Ranger RP-30FCH oil filter crushers: * Welded steel plate construction * Electric-hydraulic power unit features 2 horsepower motor * Spring-loaded shutoff switch stops operation when door is opened * Transparent door for a convenient view of the crushing process * Powered by a 2 hp electric-hydraulic pump with 2-gallon reservoir * Rugged floor stand is designed to accommodate up to 55-gallon drums for efficient fluid handling * Maximum crushing pressure of 30,000 lbs. * Filters are reduced to 20 percent of their original size with 95 percent of residual oil removed * Fulfills EPA and other mandated environmental standards * Saves on waste disposal costs and storage space * Cycle time approximately 8 to 15 seconds, depending on filter size * No-mess design operates clean and efficiently to lessen spill hazards * Ergonomic controls feature manual cycles
Not Yet Reviewed
$3,095.00
OTC's Dual Master 2-speed hand pumps are designed to automatically switch between low- and high-pressure modes, allowing for rapid advance of the ram to the workpiece and then switching to a higher pressure for the actual work. This saves time and effort compared to single-speed pumps. Features include robust construction for long-lasting performance, its ability to quickly advance the ram to the work, built-in safety features, and ease of use with a comfortable grip carrying handle. Product features and benefits: * Rugged, all-metal construction for long-lasting performance and reliability * Suitable for a wide range of applications, including automotive, heavy-duty truck, agricultural, and construction maintenance, where hydraulic power is needed * Designed for applications requiring both high-volume at low-pressure and high force at high-pressure, making them versatile for various tasks like operating single-acting rams * Can be operated horizontally or vertically (head down), offering flexibility in different work environments * Pump is designed with a comfortable carrying handle, pumping handle grip, and a contoured release knob for user comfort and ease of operation * Includes a built-in safety relief valve, pre-set at 10,000 psi, to prevent over-pressurization and potential damage to the pump or connected components
Not Yet Reviewed
$3,186.99
The OTC Vanguard 2-stage electric pumps are ideal for a wide range of applications including clamping, bending, straightening, pressing, forming, testing, pushing, and pulling. They provide fast ram approach and return with a low-pressure, high-volume stage, and then automatically switch to a high-pressure, low-volume stage for high force requirements. This design allows for efficient performance in various hydraulic applications. These pumps are designed to be compact and easy to handle, making them convenient for various work environments. Product features: * Built with robust materials for long-lasting performance in demanding conditions * Fast-acting precision-built two-stage pumping unit consisting of a gear pump for the low-pressure stage and an axial-piston pump for the high-pressure stage * Delivers low volume at high-pressure yet provides high-volume at low-pressure for fast cylinder piston approach and return * Suitable for operation up to 10,000 psi * 2-stage hydraulic pump with 2-position/3-way valve * 6 ft. remote motor control
Not Yet Reviewed
$4,708.99
The Edwards Ironworkers 10-Ton Bender is a quick-connect hydraulic tool that greatly expands your fabrication capabilities. Designed for medium to heavy material, this versatile machine powers through 2 in. (I.D.) Schedule 40 pipe, 2 1/2 in. (O.D.) tube, and 2 in. square tube quickly and accurately. (Choose from Edwards' 280+ standard Bender Die Sets to get your job done, all sold separately.) Additional details: * Plug-and-play operation * Horizontal or vertical operating positions * Proximity switch allows easy, repeatable bends * Heavy-duty rolling stand * Easy-to-use hand/jog controls
Not Yet Reviewed
$9,027.99
—
$9,576.99
Baileigh Industrial PR-403 plate rollers are durable, easy-to-use machines that will last for many years in small to medium shops. They have three hydraulically driven rolls that will handle a maximum capacity with ease and finish jobs faster. Features include: * 4 ft. forming width * 3-gauge (1/4 in.) mild sheet steel capacity * 3 hp motor runs on 220 V 3-phase power * Large planetary gearbox, connected to main motor, drives the top and bottom rolls * Industrial-grade hydraulic system drives all three rolls * Movable control pedestal includes foot pedals to run the rolling and buttons to move the forming roll up and down * Flip a switch to bring the back roll up at an angle for coning * Quick-release mechanism on the top roll makes it easy to slide off the finished work * Digital readout tracks the position of the back roll so you can make repeatable bends * Robust welded steel frame maintains accuracy and rigidity by keeping the rolls in alignment * Dual emergency stop cables are located on the front and back of the machine for safety
Not Yet Reviewed
$29,512.00
Introducing the new TP12KC-D heavy-duty 2-Post clear floor plate lifts from Tuxedo! Redesigned, this lift model now comes standard with low-profile drop-in adjustable swivel pads with height adapters, external hose routing, a padded overhead shut-off bar with kill switch, a reduced overall width, and rubber door guards. The heavy-duty arm restraints and durable powdercoat finish offers an economically priced lift with all the features you want for a great value. Big, strong, and dependable, the fully gusseted oversized base plates on the TP12KC-D and symmetric lifting arms with reinforced swivel pin holes will offer years of reliable service. Key features: * Up to 12,000 lbs. capacity * Durable powdercoat finish for longevity * Symmetric arms * Rubber door guards * Direct-drive push cylinders * Single point pneumatic lock release * Heavy-duty arm restraint system * Drop-in lift pads * Stackable adapters included * External hose guards
Not Yet Reviewed
$6,432.99
Introducing the new TP15KCX heavy-duty 2-Post clear floor plate lifts from Tuxedo! Redesigned, this lift model now comes standard with low-profile drop-in adjustable swivel pads with height adapters, internal hose routing, a padded overhead shut-off bar with kill switch, a reduced overall width, and rubber door guards. The heavy-duty arm restraints, along with durable powdercoat finish offers an economically priced lift with all the features you want for a great value. Big, strong, and dependable, the fully gusseted oversized base plates on the TP15KCX and symmetric lifting arms with reinforced swivel pin holes will offer years of reliable service. Features: * Up to 15,000 lbs. capacity * Powdercoat finish for longevity * Symmetric arms * Rubber door guards * Chain drive cylinders * Dual point lock release * Auto arm restraint system * Spin-up lift pads * Stackable "drop-in" height adapters * Internal hose routing
Not Yet Reviewed
$8,536.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
