Availability
Showing In Stock Items. Show All 56 Items.
Tuxedo TC-1300 tire changers are what any high-end race shop needs. The TC-1300's low-profile arm is ideal for run flat and hard side wall tires and features a tilt back column to allow for extra room while working. Now you can change tires quickly with Tuxedo's top-quality tire changers! Product details of the TC-1300 tire changers: * Lever less design allows for user safety and convenience * Tilt back column leaves ample room for operation * Three function assist arm adds versatility in dismounting low-profile tires * Pneumatic locking hex shaft provides reliable and convenient functionality * Powerful dual bead blaster jets on all four clamps * Inflation hose and air gauge
Not Yet Reviewed
$6,446.99
Ranger R76ATR tire changers are versatile time-savers. They have tilt-back towers that allow you to work different tire-and-wheel combos without adjusting the duck head, and the swing-arm design with tower assist ensures stiff sidewalls are never a problem. They are easy to operate and rugged enough to stand up to demanding workloads. The large 30 in. capacity turntable features adjustable, hardened-steel RimGuard wheel clamps, providing an internal clamping capacity of 9 in. to 28 in. and external clamping capacity of 10 in. to 30 in. Features: * Traveling drop-center hold-down device * Inflation system * Inflation gauge and air dump valve * Inflation pressure regulator/limiter * Oiler/lubricator * Air regulator * Bead tool/tire iron * Alloy steel mount/demount head * Nylon mount/demount head * Large soap bucket * Soap brush
Not Yet Reviewed
$7,295.00
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$5,296.82
—
$7,204.82
Baileigh Industrial SBR-5216 shear brake rollers have a massive 16-gauge mild steel capacity over their entire 52 in. width. They consist of a low-production press brake, slip roll, and sheet metal shear. This is the most powerful 3-in-1 combination machine on the market; the economical price makes it perfect for home shops, industrial art shops, and other facilities where small production runs don't justify dedicated individual machines. The shear portion of SBR-5216 brake rollers has a spring-loaded clamp that keeps the material from lifting up, which extends blade life and helps with cut quality. A blade gap adjustment, as well as a material guide, is also included. The manual press brake section has removable and movable top fingers—and the bottom V-block die that is fixed. Different fingers allow for many types of boxes and pans to be made. The rolls on the slip roll section are hardened for long life and have three wire grooves, in case wire forming is needed. The back and top rolls are also adjustable to help with forming different thicknesses.
( 1 )
$5,099.99
Baileigh Industrial SH-5210 sheet metal shears are one of the machines that started and built Baileigh's quality reputation. With their rigid, fully welded steel frames, the SH-5210 sheet metal shears will make perfect, accurate cuts every time for years to come. Features include: * 52 in. length * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 5 hp motor runs on 220 V single-phase power * Up to 28 strokes per minute * Adjustable 24 in. back gauge ensures precise repeatability * Front support arms and table guides keep the material square to the blade * Three modes on the operator console: -- Inch mode: Jog the control and ease the blade down to the material -- Single mode: Makes one-cut cycle per foot-pedal push -- Auto mode: Continue cycling as you hold the pedal down * High-carbon chromium blades with four shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life
Not Yet Reviewed
$18,299.99
Baileigh Industrial SH-8014 hydraulic compact metal shears are perfect for fabrication shops that mainly work with smaller gauges. Made from ground, polished steel plate, the SH-8014 14-gauge hydraulic compact metal shears are designed and built to run at full-capacity all day long. Baileigh Industrial SH-8014 hydraulic compact metal shears feature: * 80 in. length * 14-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 3 hp motor runs on 220 V 3-phase power * Up to 26 strokes per minute * Adjustable 24 in. back gauge ensures precise repeatability * Front support arms and table guides keep the material square to the blade * Three modes on the operator console: inch mode to jog the control and ease the blade down to the material, single mode to make one cut cycle per foot pedal push, and automatic mode for continuous cycling, as you hold the pedal down * Comes standard with high carbon chromium blades * Blades have four shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy * Covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience
Not Yet Reviewed
$20,629.99
Punching. Shearing. Notching. Sounds like work for three machines, doesn't it? But you can do it all with just one—the Baileigh Industrial SW-501 hydraulic ironworkers! These compact machines are built to multi-task at your shop, increasing production and offering years of service. Baileigh Industrial SW-501 hydraulic ironworkers feature: * Welded steel plate framework keeps the machine rigid and minimizes flex * Runs on 220 V single-phase power, so it can work at virtually any shop or job site * 50 tons of vertical pressure at each of its five integrated stations * Five workstations; each executes a different function: punching, flat bar shearing, angle shearing, bar shearing, and rectangle notching * This hydraulic ironworker's movement executes clean cuts in seconds, prevents deformed edges, and reduces waste * Material stops and multi-position back gauge simplify production runs * Large 2-piece tables with meter guides pull-out from the machine to handle many shapes and profiles * Adjustable stroke control, with downward and upward stroke knobs, can limit machine movement and reduce production costs * Jog dial lets you align tooling for safe and easy set-ups * Material hold-down with knurled handle enables you to quickly fine-tune and fit a given profile * Punching station includes a T-slot base * Seven sets of punches and dies can tackle a wide range of projects and our patented swing-away stripper makes tooling changes more efficient * Baileigh backs all ironworkers with a 1-year parts warranty and lifetime technical support by phone
Not Yet Reviewed
$20,299.99
Baileigh Industrial SW-623 hydraulic ironworkers utilize true vertical movement for all stations, eliminating any sort of pivot and mechanism allowing the smoothest punching station. If your shop takes on punching, shearing, and notching jobs on a regular basis, the SW-623 machines will prove how hardworking a hydraulic ironworker can be over decades of use. Features: * 220 V 3-phase * 1.5 in. round bar shear * 8 in. throat depth * 39 1/2 in. working height * Five fully integrated stations * Manual back gauge * Seven sets of punches and dies
Not Yet Reviewed
$24,399.99
Edwards Ironworkers' 20-ton shop presses may be small enough to fit on your work bench, but they're no lightweight. Smooth and precise, heavy-duty and versatile, their unique open side design allows for material to pass through. Power them up with an Edwards factory-installed PowerLink System or an Edwards portable power unit (230 or 460 V). Additional product features: * Compact and powerful benchtop press * Heavy-duty 3/8 in. steel construction * Cylinder with 2 in. Ram and 6 1/4 in. stroke * Rolling cylinder for maximum versatility * Working Area of 10 1/2 in. x 20 in. * Easy-to-use hand/jog controls * Quick-disconnect hoses * Hydraulic-assist table height adjustment (Also check out Edwards' 12 in. press brake tooling, bump-die tooling, the 6-piece press tooling set, and the press brake back gauge, available separately.)
Not Yet Reviewed
$7,861.99
—
$8,297.99
Edwards Ironworkers' 110-ton shop presses solve a variety of demands to improve the user's productivity. Smooth and precise, heavy-duty and versatile, their unique, open side design allows for material to pass through. Power them up with an Edwards factory-installed PowerLink System or an Edwards portable power unit (230 or 460 V). NOTE: With the addition of Edwards' Press Brake Tooling (sold separately), your shop press easily becomes a brake. Also check out Edwards' bump-die tooling, the 6-piece Press Tooling Set, and the Press Brake Back Gauge. Product features: * Heavy-duty 3/4 in. steel construction * Easy-to-use foot/jog controls * Versatile rolling cylinder * Working area of 48 in. x 37 1/2 in. * Pressure gauge * Quick-disconnect hoses * Hydraulic-assist table height adjustment * 2 V-Blocks included * Also available in models with Programmable Logic Control (PLC)
Not Yet Reviewed
$16,529.99
—
$20,981.99
Built of fully integrated and welded all-steel plate, Baileigh Industrial SH-5216A air powered metal shears can provide years of service. These air powered sheet metal shears are designed to cut 16-gauge mild steel or lighter, making them a great choice for pro and school workshops alike. Baileigh Industrial SH-5216A air powered metal shears feature: * Cuts up to 52 in. wide sheet metal * Requires only compressed air between 90 and 115 psi (no electrical power needed) * Regulator lets you control the airflow * Can cut at 20 strokes per minute for high production * High-chromium carbon blades have multiple cutting surfaces for extended life between re-sharpening * Oilers make maintenance easy and allow you to keep the machine running smoothly with less friction * Working table offers integrated squaring stops with scale * Includes front and back material supports as well as side guide * Manual rack and pinion back gauge with quick lock and measuring scale help you easily make repeatable cuts * Covered by a 1-year parts manufacturer warranty * Baileigh keeps replacement blades and other parts in stock at their Wisconsin headquarters for fast shipping * Baileigh offers lifetime technical support by phone from their in-house team of knowledgeable representatives
Not Yet Reviewed
$7,504.29
Baileigh Industrial RDB-125 rotary draw benders offer you the power to amp-up your work without scorching your budget. These low-pressure, industrial-grade hydraulic systems enable fast tooling changes and provide infinite tooling possibilities. They feature replaceable bronze bushings at all pivot points with grease zerks; an anti-spring back mechanism for stopping and starting; and an integrated degree dial with a bend indicator. Foot pedal controls leave your hands free to manipulate the material. Power-up your performance to bend pipe, tube, square tube, and rods with precision with a Baileigh RDB-125 rotary draw bender.
Not Yet Reviewed
$5,829.00
Built with a plate steel carriage, the rigid and simple Baileigh Industrial SH-12014 hydraulic sheet metal shears will give you decades of dependable service. These 120 in. hydraulic sheet metal shears will allow you to cut full sheets the long way and offers three modes of the operator console: inch mode to jog the control and ease the blade down to the material, single mode to make one cut cycle per foot pedal push, and an Auto mode for continuous cycling, as you hold the pedal down. Baileigh Industrial SH-12014 hydraulic sheet metal shears feature: * 14-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 5 hp motor runs on 220 V 3-phase power * Powerful industrial-grade hydraulics produce smooth movements that prolong blade life * Up to 20 strokes per minute * Adjustable 24 in. back gauge helps ensure repeatability * Front support arms and table guides keep the material square to the blade * Comes standard with high carbon chromium blades * Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Fully welded steel construction helps prevent flex and maintain accuracy for many years * Covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience
Not Yet Reviewed
$28,249.99
Baileigh Industrial SH-5214 hydraulic medium-duty metal shears offer dependability and strength, at a great price. With 35 strokes per minute and their rigid, fully welded steel plate construction, the SH-5214 shears will make efficient, accurate cuts every time. Features include: * 52 in. length * 14-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 3 hp motor runs on 220 V single-phase power * Adjustable 24 in. back gauge ensures precise repeatability * Front arm extensions and table guides keep the material square to the blade * Three modes on the operator console: -- Inch mode: Jog the control and ease the blade down to the material -- Single mode: Makes one-cut cycle per foot-pedal push -- Auto mode: Continue cycling as you hold the pedal down * High-carbon chromium blades with four shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life
Not Yet Reviewed
$11,284.29
H&S Autoshot HSM 250 Double-Pulse Synergic MIG welders are multi-purpose MIG, TIG, and stick welding units. These compact machines offer three MIG wire feed and torch drives with 28 synergic, synergic single-pulse, or synergic double-pulse programs for steel, aluminum, and silicone bronze welding. They accommodate wire sizes from 0.023-0.045 in.—and are lift-arc DC TIG and electrode welding capable. With 250 amps of power, they're capable of welding all steel and aluminum alloys from 20-gauge to 1/2 in., and they offer twin cylinder racks and dual gas inputs for mixed and 100 percent gases. Operating features include: a digital control panel, infinitely variable output power from 10-250 amps, operator selectable pre and post gas, slow feed, burn back, spot, ramp, slope, frequency, duty, arc length, spool gun, hot start, and arc force. Each kit includes: * Double-pulse synergic inverter power supply * Three dedicated MIG guns * Compact TIG torch with thumb-wheel control and 12 1/2 ft. quick-connect welding cable * 250 amp work clamp with a 10 ft. quick-connect welding cable * 250 amp electrode holder with a 10 ft. quick-connect welding cable * Dual gas regulators * AK-2 torch kit * Spool of steel, aluminum, and silicone bronze wire * V & U drive rolls * Operators manual
( 2 )
$5,141.99
Ranger's CoolCharge A/C recovery and recharging machines make vehicle A/C recovery, recycling and recharging faster and easier than ever! These automatic programmable CoolCharge AC-134 machines are designed to evacuate and recover 95 percent of old coolant and recharges vehicle A/C systems within +/- 0.5 oz. of the desired charge. There's nothing easier than programming the A/C settings, and then walking away to let the Ranger CoolCharge AC-134 machine do its job. Features and specifications: * Meets UL 1963 and SAE J2788 Standards * Refrigerant: R134a * Flushing function for rapid discharge of used coolant * Electric database * Car, truck, SUV, and bus compatibility—Electric/Hybrid vehicles excluded * Automatic oil discharge * Programmable vacuum for faster recharge and recovery * Oil injection: Solenoid/visual * Refrigerant charge: Automatic with electronic scale * A/C Pressure adjustment * Operation record for total convenience—a large display faces upright on the machine and an optional print features lets you provide results for both you and your customers * Automatic CoolCharge is 100 percent programmable, so there's no standing over and babysitting the automated recharge and recovery process—while the machine works, technicians can perform other inspections and truly provide the best possible customer care in your region * Oil that is drained during operation is stored internally in a container, and the simple LCD display will indicate how much needs to be returned to the vehicle system * The filter quality and refrigerant levels are also automatically monitored by the machine—functions will cease in the event the filter is too dirty or the refrigerant level becomes too low to service the vehicle * Massive 12 in. back wheels and lockable 4 in. front casters allow you to easily maneuver the machine virtually anywhere and conveniently lock in place with a foot-activated switch to keep unit stationary while in use * Manual and full auto modes included
Not Yet Reviewed
$5,795.00
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
Baileigh Industrial PR-403 plate rollers are durable, easy-to-use machines that will last for many years in small to medium shops. They have three hydraulically driven rolls that will handle a maximum capacity with ease and finish jobs faster. Features include: * 4 ft. forming width * 3-gauge (1/4 in.) mild sheet steel capacity * 3 hp motor runs on 220 V 3-phase power * Large planetary gearbox, connected to main motor, drives the top and bottom rolls * Industrial-grade hydraulic system drives all three rolls * Movable control pedestal includes foot pedals to run the rolling and buttons to move the forming roll up and down * Flip a switch to bring the back roll up at an angle for coning * Quick-release mechanism on the top roll makes it easy to slide off the finished work * Digital readout tracks the position of the back roll so you can make repeatable bends * Robust welded steel frame maintains accuracy and rigidity by keeping the rolls in alignment * Dual emergency stop cables are located on the front and back of the machine for safety
Not Yet Reviewed
$26,829.99
BendPak HD-9AE 4-post alignment car lifts are compatible with all leading alignment instrumentation, including 3-D and camera wheel alignment systems. They feature adjustable multi-position leveling, integrated front radius plates, and rear slip plates. A maintenance-free electric hydraulic power system ensures ultimate dependability and the controls are located within easy reach. BendPak 4-post lifts are built with a single hydraulic cylinder hidden under the runway for maximum performance and reliability--with minimum exposure to the elements. Additional features of BendPak HD-9AE 4-post alignment car lifts: * Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment * Dual radius plate positions offer better vehicle accommodation * Heavy-duty stainless steel lifting cables * Grease nipples located on every sheave * An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture * A durable powdercoat finish * Spring-loaded safety locks automatically engage continuously during rise, and adjustable safety ladders allow for precise runway leveling--even when installed on sloped floors * A simple push-button pneumatic lock release makes lowering operations simple and fast * A secondary lock system is on constant guard, acting as a slack-cable device in the unlikely event of an unexpected cable failure * Lifting cables, air lines, safety latches, and sheaves are all fully enclosed within lift structure * Non-skid runways provide maximum grip, even when the runway surface is wet or oily
Not Yet Reviewed
$8,995.00
Baileigh Industrial RDB-350-TS programmable tubing benders will stand up to the rigors of any shop--and save you time. They bend 180 degrees in 16 seconds, and their quick-release die system speeds up production. Baileigh RDB-350-TS benders feature: * Capacity of 2.5 in. Schedule 40 pipe and 3 in. tube with .187 in. wall thickness * 24 in. centerline radius maximum * Bends to 360 degrees in one shot, both left and right * You can program the desired angle, material spring back, and bend speed for easy repeatability * Programmer can also keep track of rotational orientation * Touchscreen controller designed for user-friendly programming * 320 degree rotation of the controller lets you operate from any side of the machine * Internal memory can store up to 170 programs of 10 bends per program * Unlimited program storage/backup via the micro SD port * Quick-release counter die system allows you to load and unload pipe bender quickly for high-production runs
Not Yet Reviewed
$26,379.00
BendPak 1302BA-302 digital pipe benders include BenPak's Deluxe 302 die package. Their 1302BA Series of pipe benders feature an ergonomically placed and highly sophisticated keypad display that can record bending patterns for accurate and repetitive use. In extremely busy shops, these automatic pipe benders will save time and make it easy to duplicate results. Features include: * 2 separate end-finishing units at rear for all necessary flaring and expanding * Knee control and depth-of-bend degree plate for manual bending operations * Comes complete with quick-release bending and finishing dies * Includes high-speed clampless swager and internal expander * Easy-to-use drop-in collar makes swaging operations quick and efficient * Twist-lock tooling * Integrated power-relief control valve * Pass-through cylinder stem passes completely through the primary frame * Rigid 6 in. x 6 in. x 3/8 in. welded-steel tube frame * Commercial-grade hydraulic cylinders * All cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards * Quick-release bending dies for reduced set-up times * Bending heads precision grounded to within .002 in. * Enclosed controls keep your bending area clutter-free * 2.5 in. oversized barrel shafts for maximum dependability and minimum maintenance * Standard grease fittings allow for simple lubrication * NEMA-rated on/off switch box incorporates overload relays that automatically disrupt power supply should an unforeseen over-current situation occur * Pressure gauges let you know exactly what the system pressures are at all times * Industrial grade casters help you easily move the bender around your shop * Adjustable pressure valve located right up front * One-piece barrel ensures that the bending gates stay perfectly aligned with the ram * Heat-treated tooling for greater service life * Convenient tool trays keep your tooling organized * Strong, 5 hp Baldor energy efficient motor delivers maximum performance * Direct-drive, high-speed, 4 gpm pump * Single enclosed bottom cylinder applies pressure evenly to the back gates and, because it is hidden, does not interfere with the tubing * Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination * Canister oil filter in the hydraulic system keeps the oil nice and clean * Oil sight-gauges allow you to visually inspect oil levels * Oversized 1/2 in. high-pressure hose provides better speed and cooling * Open-sided swager box allows for easier access and reduces the chance of "crashing" tools and damaging the cylinder
Not Yet Reviewed
$13,795.00
BendPak BB-2 Blue-Bullet pipe benders provide the ultimate tooling package and machine for your shop. They come standard with bending dies, back shoes, half shoes, three-quarter shoes, solid expander dies, pipe collars, end finishing tools, segment expanders, and accessories. These 5 hp Blue-Bullet benders use efficient Baldor motors, 4 gpm direct drive pumps with oversize 0.5 in. high-pressure hoses, and high-capacity fluid reservoirs to keep efficiency high and temperatures lower. Commercial-grade hydraulic cylinders with chromoly shafts, heat-treated tooling, and quick-change bending dies are designed to keep these machines on the cutting edge for years to come. When it comes to bending, flaring, and expanding exhaust tubing, always be prepared for the job with BendPak BB-2 Blue-Bullet pipe benders. Additional features: * Two separate end-finishing units at rear * One-piece barrel to keep gates aligned with ram * Front mounted adjustable pressure valve * NEMA rated on/off switch box with overload relays * Bending dies in 1.5, 1.75, 1.875, 2, 2.25, and 2.5 in. sizes * Can bend up to 3 in. by 0.095 in. wall tubing with appropriate dies (not included) * Single handle or knee controls * BendPak's 10-step powdercoating ensures thorough coverage and an extremely durable finish
Not Yet Reviewed
$12,195.00
BendPak 1302 Semi-Automatic Pipe Benders with Deluxe 302 Tooling brings an extra level of precision to your workshop. This series is comprised of powerful automatic exhaust pipe benders designed to expedite any bending process. Convenient, space-saving, side-loading swager lets you load longer pipe, even when your back is against the wall. The benders include a die package and dual-function, end-finishing unit for extremely precise OE expansions and flares. Product features: * 2 separate end-finishing units at rear for all necessary flaring and expanding * 3-button control for automatic or manual bending * Deluxe 302 tooling package (standard) * Deluxe metric tooling package (optional) * Complete with quick-release bending and finishing dies * High-speed clampless swager and internal expander * Easy-to-use drop-in collar makes swaging quick * Twist-lock tooling * Integrated power-relief control valve * Rigid 6 in. x 6 in. x 3/8 in. welded-steel tube frame * Commercial-grade hydraulic cylinders * All cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards * Quick-release bending dies for reduced set-up times * Bending heads precision grounded to within .002 in. * Enclosed controls keep your bending area clutter-free * 2.5 in. oversized barrel shafts for maximum dependability and minimum maintenance * Standard grease fittings allow for simple lubrication * NEMA rated on / off switch box incorporates overload relays that automatically disrupt power supply should an unforeseen over-current situation occur * Pressure gauges let you know exactly what the system pressures are at all times * Remote foot-operated controls * Adjustable pressure valve located right up front * One-piece barrel ensures that the bending gates stay perfectly aligned with the ram * Strong 5 hp Baldor energy efficient motor delivers maximum performance * Quick-change bending dies: With simple, twistable locks and quick-change bending dies, you'll be cycling through bending projects faster than any of your competitors. Let them try to play catch-up with their cheap imitation pipe benders while you run ahead with the best. You'll be glad you went with the world leader in pipe bending. * Long-stroke bending cylinder: BendPak pipe benders, fitted with an extended-length, 14 in. top cylinder, do not require the use of pusher block extensions for small-radius die jobs. Additionally, the cylinder can be retracted, offering more clearance for die-changing, as well as the removal of bent tubes.
Not Yet Reviewed
$13,095.00
Baileigh Industrial SF-5216 foot shears are built with oilers and a rigid steel frame to last for many years and give you accurate cuts. The fit and finish of these heavy-duty stomp shears are unrivaled in the industry. Features include: * Can cut 16-gauge mild steel over its entire 52 in. length * Easy to operate: just put material between the blade and the table, then stomp on the pedal * 4-sided high-chromium blades can be turned and also resharpened to extend use * Front gauge and back gauge, each 24 in. long help you make repeatable cuts every time * Oilers make maintenance easy and allow you to keep the machine running smoothly with less friction * Solid steel construction ensures maximum rigidity and minimizes deformation to produce better cuts * Includes a finger guard for safety when shearing
Not Yet Reviewed
$5,999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
