Availability
Showing In Stock Items. Show All 26 Items.
Clear out exhaust fumes from garage service areas with John Dow EuroVent vehicle exhaust extraction systems. Practical and affordable, these portable extractors capture fumes from the vehicle and discharge them safely up to 30 ft. away. Plus, caster wheels allow the units to be moved anywhere needed. Features and benefits include: * 3/4 hp fan produces 330 cfm airflow * Fan is mounted in tough, roto-molded polyethylene "flow-through" case * Mobile base makes the system easy to position behind the vehicle * Height position is controlled by a quick-release, spring-loaded cam * The discharge hose stores neatly when not in use * Optional "Y" hose adapter available for dual-exhaust vehicles (sold separately) * 110 V * 86 lbs. overall weight
Not Yet Reviewed
$1,655.99
PRW low-profile Engine Test Stands (ETS) with short block adapter allows the mechanic to "build" the short block, and then rotate the engine to the upright position, just like a typical engine stand. Then, temporarily support the short block and install the center supports, remove the rotating head unit, and re-attach the rear engine supports to finish the engine assembly. After final assembly, install the fuel cell, plumb for fuel, wire the electrical, connect the battery, and you are ready to run! Obviously, this over-simplifies the necessary preparation and hard work; but a great deal of satisfaction can be gained with the knowledge that your engine is ready and worthy to be installed in your hot rod, race car, street machine, truck, boat, or off-road vehicle. The patented collapsible design of the ETS is manufactured with standard parts and readily available replacement parts from the manufacturer. They offer space-saving benefits when collapsed, making them ideal for the small shop or race trailer. PRW low-profile ETS are designed to accommodate most engines and built to meet the demands of high-output racing engines and heavier big blocks, taking mobile engine test stands to a whole new level of functionality.
Not Yet Reviewed
$1,948.42
Racers and gearheads alike appreciate the portable Quickjack BL-3500SLX car lift, the fast and easy way to raise your vehicle up to 20 in. for changing tires or oil, servicing brakes, repairing exhausts, and undercarriage maintenance. The lightweight frames fit in your trunk or back seat, and will slide under cars as low as 3 in. off the ground. Simply position the 14-gauge steel welded platforms and rubber lift blocks on either side of the vehicle, attach the quick-connect hydraulic hoses—and your car is suspended in mere seconds. The open-center design (no crossmembers) gives you unlimited access beneath the vehicle. This system will support up to 3,500 lbs., and is available in three power source options: 12 V DC, 110/120 V, and 220 V. Additional features: * Dual-position automatic safety lock bars * Dual locking positions: mid-level and full rise * Portable power unit with remote push-button control * Steel mounted wheels for effortless rolling * Hydraulic flow divider for precise equalized lifting * Power-assist canisters for increased lowering speed * Durable powdercoat finish Quickjack BL-3500SLX Car Lift kits include: * Two jack frame assemblies * Two 150 in. hydraulic hoses * Two 14 in. auxiliary hoses * Two frame handles * 4 rubber lifting blocks measuring 1.5 in. x 3 in. x 4 in. (stackable) * 4 rubber lifting blocks measuring 3 in. x 3 in. x 4 in. (stackable) * Mini hydraulic power unit with pendant control
( 2 )
$1,924.99
Longacre billet scale pad levelers set up quickly and disassemble easily for convenient storage and transportation. Rather than the traditional one-piece bulky roll-off, these units are modular. The actual scale pad leveler is made from T-6 billet aluminum with a full floor for the best rigidity and the most accurate setups possible. The optional roll-offs attach quickly to these levelers via a simple clip-on bracket. All four levelers and roll-offs set up in less than two minutes (plus leveling time). The leveler has four swivel adjusting feet that pop in and out for convenience and easy storage. They're held in place with rare earth magnets. The roll-offs each have two more pop-out feet. You can start with just the levelers, then add the optional roll-offs later. * CNC machined T6 aluminum * 4 pop-out swivel feet for convenient storage and easy setup * Wheel stops on leveler for safety * Full floor for best pad support and rigidity * Set of 4 levelers for 2 1/2 in. scale pads (pads not included) * Starting point to creating your own custom leveling fixture, using our new modular roll-offs (available separately)
Not Yet Reviewed
$1,852.99
Baileigh Industrial EW-28 English wheels are compact, entry-level units built with a welded tube frame, and can smooth compound curves into 18-gauge mild steel. The EW-28 includes all the tooling you'll need--six lower rolls. Key features: * Ample 28 in. throat depth * Comes standard with an 8 in. x 2 in. upper roll * Includes lower anvil rolls with six different radii: 2, 3, 4, 6, 8, and 12 in. * Arrives intact with only minor assembly required (no welding needed) * Fully welded, heavy-walled square tubing frame helps eliminate flex when forming at maximum capacity * Rigid steel stand is built to withstand years of hard use while shaping mild steel and aluminum sheet metal * Tooling rack on the side gives you a handy place to put your rolls
Not Yet Reviewed
$1,807.99
Completely modular, the ARB Outback Solutions range of roller drawer systems can be individually tailored to your needs and vehicle. Exclusive to ARB and suitable for many vehicles—including SUVs, pickups, and trailers—these systems can also be used in non-vehicle applications such as sheds and warehouses. Three types of modules are available: roller drawer, roller floor, and roller drawer with roller floor. They're offered in a range of sizes, resulting in more than 200 possible configurations. Customize your vehicle or storage area! Additional product details: * Engineered for both on and off-road driving with anti-rattle design * Key lockable, push-pull slam shut latches for ease of use and maximum security * Long-lasting, UV-stable commercial carpet designed to complement modern vehicle interiors * Cross-folded floor ensures maximum support for items placed within each unit. Up to a maximum of 330 lbs. per drawer, 600 lbs. combined * Fully sealed, dust- and water-resistant bearings for superior longevity working in harsh environments * Integrated fridge slides on roller floor models provide a true flat mounting surface * Vehicle-specific side floor kit with easy latches completes installation and provides additional storage areas within the cabin or tray * Water-resistant bonded marine plywood with steel reinforced guards for superior strength sourced from sustainable forests * Folded stainless steel bearing runners for ultra-smooth drawer and slide operation * Self-locking anti-rollback system locks into place at full extension; this holds the drawer from rolling closed even on inclines * Modular units allow greater flexibility if needs change in the future * Class-leading deep drawers with internal heights up to 9.8 in. for greater packing potential
( 1 )
$1,563.00
JET Cyclone dust collectors deliver the efficiency you want and need for your shop. Dust particles may not always be initially visible, but as you sand and cut, they settle across your machinery. JET Cyclone dust collectors are available in several models that include direct mount filters, radio frequency remote controls, and large collection bins to take your shop's capabilities to a new level. They are also fitted with swivel casters, making it easy to move units around the shop. For a work area that is safe, clean, and efficient, choose the JET Cyclone match for your shop's needs. Features and benefits: * 2-stage separation provides more working CFM than comparable horsepower single-stage units * Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction * Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends * Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below * Heavy debris is captured in a drum with quick-release levers and independent casters for quick emptying * Included radio frequency remote control works from up to 50 feet away * Double paddle manual cleaning system quickly cleans the pleated filter * Remote timer settings allow system to run for 2, 4, 6, or 8 hours before automatic shutoff (not on all models)
Not Yet Reviewed
$1,869.00
Baileigh Industrial SN-F16-HN manual corner notchers are high-quality cast iron units perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6 in. x 6 in. in one manual stroke. For your safety Baileigh Industrial includes a blade guard to save your fingers. The finished notches are extremely clean and have burr-free edges and adjustable guides on the oversized table allow for accurate repeatable notches. The SN-F16-HN sheet metal notchers include a sturdy floor stand, freeing up valuable worktop space, or you can take it off the stand and have a machine that is very compact and can be easily moved from jobsite to jobsite.
Not Yet Reviewed
$1,786.99
Ideal for workshop pits due to low minimum height and long stroke, the AC Hydraulic VLT12 transmission jacks combine the convenience and safety features to ensure a positive and safe experience for operators. The VLT12 transmission jacks are engineered especially for lifting heavy truck transmissions and are equipped with hard chromium plated rams and a high-quality strength steel frame to offer a long product lifecycle. VLT12 transmission jack features: * Hard chromium plated rams and high-quality strength steel frame guarantees a long product lifecycle * Pedal operated pump with built-in quick lift leaving both hands free for working * Precise adjustment for positioning of transmission * High-quality galvanized support saddle base frame * Built-in safety valve and hand operated dead man's release for optimum safety whilst lifting and lowering * High-quality hydraulic unit secures rapid and precise lifting of fuel tanks, transmissions, exhaust pipes, etc. * Sturdy swivel castors (2 lockable) for optimum stability and maneuverability
Not Yet Reviewed
$1,912.00
On Sale
Homak 24 in. CTS lockers are constructed from 19-gauge 1.0mm thick steel, available in three finishes: Fury Red, Midnight Black, and Rally Sport Blue. The units include a power strip with three outlets to charge power tools and equipment; two 6×2 in. swivel locking casters with a weight capacity of 660 lbs. each. They're equipped with an HMC High Security Tubular Locking System to keep valuables safe and secure. Additional details include: * Reversible door allows the locker to be added to either side of the unit * Full-length black aluminum contoured, scoop-style lift latch drawer pulls prevent drawers from opening and provide hassle-free access to tools * One fixed durable stainless steel shelf and two adjustable shelves for customizable storage * Four drawers with replaceable ball-bearing slides that have a 100 lb. weight capacity per slide pair * Non-slip PVC foam drawer liners keep tools stationary * Bold UV protective high-gloss powdercoat provides a sleek look to the overall design
Not Yet Reviewed
$1,729.99
$1,556.99
John Dow Pro-30 fuel caddies put safety first. Designed for professional service technicians, these steel gas caddies are UL-listed and built to meet stringent OSHA standards. The durable, compact cart-style units are fitted with heavy-duty locking rear wheels and front swivel casters, creating shop equipment that's stable and easy-to-move. John Dow offers a choice of manual or air-operated models to fit your needs. Gasoline vapors are highly volatile. Perform services safely and efficiently with a pro on the job—Pro-30 gas caddies from John Dow Industries. Features also include: * 30-gallon capacity steel tank * Fill level gauge * Internal filter system * 4-way directional valve * Ground wire and clamp * 8 ft. PVC suction/discharge hose with internal grounding wire * Decal set for content identification
Not Yet Reviewed
$1,560.99
—
$1,620.99
K Tool's 1,000 lb. capacity under hoist two-stage transmission jacks are must in the shop. These 1/2-ton capacity transmission jacks feature a two-stage telescopic neck design and a speed pump foot pedal for a quick load. Lifting range is also an important factor when deciding which jack to purchase, and these telescopic transmission jacks boast a lifting range of 37 in. up to 76.4 inches in height. Plus, with the units four sturdy caster wheels, you can easily maneuver the jack around the shop. Additional features and benefits: * Two-stage telescopic design for maximum height * Large base provides balance while in use and helps increase safety * Convenient release foot pedal allows for smooth operation and ease of control while lowering transmissions * Multi-position saddle adjusts to multiple angles * Safety chains secure the workload to prevent injury *Hydraulic double pump system provides fast lifting under no load * Overload valve prevents jack from being used beyond its rated capacity * Speed limiting valve ensures an automatic safe speed descent; not greater than 1 in. per second * The cover on the pump system helps keep dust and dirt out of the hydraulics for longer life includes grease fitting for easy maintenance * Deluxe saddle with two angle adjustments (fore/aft and side to side; for maximum user flexibility and includes a tie-down chain to secure the load) * Heavy-duty 4 in. steel swivel casters provide effortless maneuvering through the shop (2 standard and 2 with locking mechanisms) * Meets or exceeds ASME PASE 2019 standards
Not Yet Reviewed
$1,501.99
Sunex Tools air/hydraulic floor jacks are available in a choice of capacities and offer continuous, dependable performance for a variety of lifting needs. Heavy-gauge steel sides prevent twisting and a Uniwelded hydraulic power unit offers increased strength and leak prevention. Wiper seals keep contaminants out of the jacks' hydraulic system, and their flash chromed ram and pump piston provide excellent rust protection. Safety valves are built into Sunex Tools air/hydraulic floor jacks to prevent these jacks from being used beyond their rated capacities and ram extensions. Handles can be locked in multiple positions, and the release knob operates independently of their handle-locking levers. Sunex Tools air/hydraulic floor jacks are stable and maneuver easily, thanks to their front wheels with roller bearings and ball bearing mounted rear caster wheels. They also feature a rear kick plate to help turn them in tight spaces.
( 3 )
$1,956.99
Rotate your work with AutoTwirler Plus restoration rotisseries. These time-saving, money-saving automotive tools put a new spin on your projects to help you work comfortably and more efficiently--by yourself. They are built to handle 3,000 lbs. with heavy-duty steel. They also feature two hydraulic cylinders to easily raise your project to a comfortable height, adjustable pivot points, heavy-duty reinforced phenolic casters to roll your work wherever, and their one-of-a-kind balance kit with Acme thread. Twirl your vehicle 360 degrees and lock it into position for easier welding and rust repair, get to those hard-to-reach areas and do a better job, and work safer and faster with AutoTwirler Plus restoration rotisseries.
( 4 )
$1,993.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
