Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET SILVERADO 2500 HD Tools & Shop Equipment
Showing In Stock Items. Show All 44 Items.
Proform Harmonic Balancer Puller and Installer Tools
Proform harmonic balancer puller and installer tools are equipped with a roller thrust bearing for easy installation. They may also be used for steering wheel installation and removal. These heavy-duty professional tools have a maximum recommended torque of 150 lbs.-ft. The tools are available in universal and application-specific models.
( 72 )
$119.99
Nickky Bobby Exhaust Gasket O-Ring Cutting Tools
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
On Sale
Mr. Gasket Rear Main Seal Installation Tools
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$77.55
$69.80
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
OTC Glow Plug Bore Reamers
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
( 1 )
$177.99
SuspensionMAXX Super T Torsion Bar Tools
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
On Sale
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$64.55
$58.10
—
$58.15
MotoRad Cooling System Pressure Tester Adapters
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$45.99
—
$93.99
Performance Tool Torsion Bar Unloading Tools
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$41.99
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
OTC Fuel Tank Lock Ring Wrenches
OTC fuel tank lock ring wrenches are a universal design that allows tools to fit fuel tank lock rings on a range of vehicles. Used with a drive ratchet or breaker bar, they easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
( 12 )
$92.99
SPC Performance Truck/SUV Ball Joint Presses
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Dorman Rear Crankshaft Oil Seal Installers
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$72.99
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 25 )
$15.99
—
$22.99
OEM Automotive Tools Fuel Tank Lock Ring Tools
OEM Automotive Tools fuel tank lock ring tools are a universal design that allows them to fit fuel tank lock rings on the many vehicles listed in the applications. Used with a drive ratchet or breaker bar, they enable you to easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
Not Yet Reviewed
$34.99
On Sale
RAM Clutch Billet Steel Alignment Tools
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 55 )
$49.00
$44.10
BOLT Lock Cylinders
BOLT offers replacement lock cylinders for their toolbox latch retro-fit kits. They will match your factory ignition key when you select a cylinder model recommended for your vehicle/make. The lock cylinders feature an automotive-grade tumbler with a corrosion-resistant zinc core, plus a rugged, weather-resistant exterior. They're made with a stainless steel lock shutter to keep dirt out.
( 7 )
$16.99
—
$17.99
Lisle GM Caster Camber Kits
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$81.99
OTC GM Torsion Bar Unloading Tools
These OTC torsion bar unloading tools are manufactured with a larger C-frame opening to be used on trucks with heavy-duty chassis and larger torsion bars. The OTC GM torsion bar unloading tools hold the torsion bar while you make the adjustments.
( 15 )
$112.99
Centerforce Clutch Alignment Tools
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
Performance Tool Spindle Nut Wrenches
These Performance Tool spindle nuts wrenches make quick work of stubborn spindle nuts. These wrenches feature chromoly steel and black oxide sockets that fit most 2WD and 4WD light truck applications.
( 58 )
$29.99
Yukon Gear & Axle Setup Bearings
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$182.99
Lisle Fuel Injector Remover and Installer Kits
Lisle fuel injector remover and installer kits come with three application specific attachments. Remove the shoulder bolt to switch between the attachments. The injector puller can handle a variety of injectors that are commonly found in Cummins and Duramax engines. The two-jaw design firmly grips the injector while it is being removed by the slide hammer. These kits save time and reduces the likelihood of damaging the injector or head.
Not Yet Reviewed
$204.99
SPC Performance Camber/Caster Wrenches
These SPC Performance camber/caster wrenches have been designed to make front-end alignments easier and faster. They feature an offset-L design to permit easy access to the mounting bolts. These SPC Performance camber/caster wrenches are available in your choice of SAE or metric sizes.
( 1 )
$34.99
