Availability
Showing In Stock Items. Show All 32 Items.
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 196 )
$81.99
Summit Racing™ LS damper pin drill fixtures give you everything you need to drill and pin your harmonic damper on your non-keyed LS or LT engine. They're designed for OEM and similar aftermarket dampers when using belt driven superchargers. Kit includes a heat-treated drill fixture, 4 dowel pins (1/4 in. x 1 in.) and a 1/4 in. cobalt drill bit.
( 12 )
$71.99
Summit Racing™ LS./LT engine lift plates assist you with removal and installation of your engine. Made from 1/4 in. thick steel, our super strong lift plates are specifically designed for the Late Model Gen 3,4,5 LS and LT Series GM engines. These bolt in place of the valley cover and feature three lifting points for balanced engine weight or offset for angling engine with transmission attached. Let us give you a hand in the garage with our Summit Racing™ LS/LT Engine Lift Plates.
( 6 )
$69.99
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 8 )
$45.99
ICT billet LS crankshaft pin drill fixture kits allow you to effortlessly drill and pin your GM LS Series crankshaft and balancer to prevent slip when using a supercharger. Made from high-grade steel, the bits easily drill into the crank and balancer.
( 9 )
$109.99
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$369.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$229.99
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$200.99
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 49 )
$59.99
On Sale
Clearance
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 15 )
$299.99
ICT Billet oil pump alignment tools are the thing you need when removing an oil pump. Perfect when doing a cam swap, these tools mount above the existing oil pump and make it an easy reinstall when putting the oil pump back in the engine. No need to worry about if the oil pump is straight with ICT Billet oil pump alignment tools.
( 3 )
$58.99
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$45.99
—
$113.99
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 2 )
$47.99
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
Torque your harmonic balancer bolt with ease using the ICT Billet flywheel holding tool. These specially made tools will hold your crankshaft in place while you properly torque down your harmonic balancer bolt. These tools are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
( 18 )
$58.99
ICT Billet vacuum pump block-off plates are designed to plug the oil galley when the vacuum pump is removed from your engine block. Built from high-quality, aerospace-grade billet aluminum, these kits include the necessary O-rings and hardware needed for installation. Order the kit recommended for your vehicle and engine application.
( 3 )
$36.99
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$79.99
OTC injector rail assembly removers are used for removal of the direct injection fuel rail without damaging the unit. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. OTC injector rail assembly removers include the remover, stud adapter, and L-hook and are specific to 2007-14 General Motors Direct Injection engines.
Not Yet Reviewed
$191.99
Before installing the COMP Cams 5455 spring limiter tool, it's necessary to compress the variable valve timing spring. These camshaft phaser disassembly wrenches compress the spring—so you can install the 5455 limiter tool and then the 5457 or 5459 phaser limiter plug. Order the wrench recommended for your year/make and engine application.
Not Yet Reviewed
$32.95
OTC injector seal installer and sizer adapters ensure replacement injectors and seals are installed correctly. Two different kits are available. Choose the appropriate one for your application. OTC kit 6757 installs the PTFE seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal into the groove on the injector tip. The sizer goes over the seal to compress it back to the correct O.D. to allow installation into the cylinder head. OTC kit 6756 installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. Two seal installation pilots for each groove, a seal installer driver, and a compression sizer is included.
Not Yet Reviewed
$179.99
Summit Racing™ cam phaser tools pressurize the phaser with air, allowing it to float for piston-to-valve clearance checks through the phaser's range. Available in several styles, select the appropriate to your application.
Not Yet Reviewed
$99.99
After compressing the VVT spring, this COMP Cams camshaft phaser spring limiter/lock tool (5455) is used to hold the variable valve timing spring in place while installing the 5457 phaser limiter plug. COMP Cams offers the engine timing tools needed for a variety of vehicle year/make and engine applications.
Not Yet Reviewed
$22.95
ICT Billet camshaft installation handles are crafted from aluminum. They are offered in two lengths to make the install or removal of your camshaft easier. Get good leverage and a good grip with ICT Billet camshaft installation handles.
( 12 )
$58.99
OTC injector retaining clip replacers ensure proper retention of the injector to the rail. These plier-type tools remove and install the injector retaining clips without over-spreading. For specialty GM service tools, OTC's lineup includes over 40 tools that will make maintenance and repairs easier.
Not Yet Reviewed
$176.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
