Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
OTC 6,000 lb. Capacity Revolver Diesel Engine Stands
These OTC 6,000 lb. capacity revolver stands will handle the heaviest of engines. OTC designed these stands with a 96:1 ratio worm gear set, and the crank handle can be locked in any position. Their integral 12-ton jack raises the work to provide the swing radius needed for clearance.
Not Yet Reviewed
$8,416.99
OTC Cylinder Leakage Tester Kits
OTC's cylinder leakage tester kits quickly diagnose internal engine problems, such as bad rings, valves, and leaking head gaskets. OTC includes an adjustable regulator, fittings, hose assembly, and a case.
( 66 )
$110.99
OTC Front Coil Spring Compressors
These OTC front coil spring compressors work on most late model rear-wheel drive American-made models where the spring is located between upper and lower control arms. OTC manufactures these tools for performance and dependability. They include four case-hardened, self-aligning plates to ensure proper load distribution under tension.
( 54 )
$265.99
OTC Strut Tamer II Extreme Spring Compressors
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,569.99
—
$1,955.99
OTC 30-Ton King Pin Presses
OTC 30-ton king pin presses include the heavy-duty kingpin and brake anchor pin pusher that utilizes its cylinder and hydraulic force to replace traditional time-consuming torch and hammer methods. They get the job done in minutes instead of the better part of a day. Five special collars and two pins allow OTC 30-ton king pin presses to work on both straight and tapered kingpins. Product features and items include: * Accommodates sizes from 7/8 in. to 2 in. diameter and up to 11 1/4 in. length * Capable of pushing out heavily corroded kingpins * Anchor pin can be removed quickly by using the special adapter installed in the pusher's base block with the unit positioned over the brake's spider * Hydraulic cylinder (4121A-MA) * 2-speed hand pump; 0.662 cu. in./stroke (4012A)
Not Yet Reviewed
$2,446.99
OTC Hydraulic Rams
OTC high performance hydraulic rams are made for strength, safety, and performance. These OTC hydraulic rams feature threaded ram collars and internal base threads to simplify mounting, as well as threaded piston rod ends. These hydraulic rams are a great replacement for worn-out leaky rams on body and frame equipment.
( 2 )
$643.99
—
$2,076.99
OTC Deluxe Compression Tester Kits
OTC complete deluxe compression tester kits offer a complete package for compression testing on gas engines. OTC also includes the deep well connector used on recessed plug well style heads and the new Ford Triton engine adapter using 16mm thread plugs. Kits include: * Flat and tapered seat plug adapters * 25 in. flexible hose * 2.50 in. gauge * Dual scale * 8 in. deep well 14mm connector * 5 in. flex Ford Triton 16mm adapter * 12 in. flex hose with a 14mm standard reach * 12 in. flex hose with a 14mm long reach * Carrying case
( 38 )
$109.99
OTC Axle Shaft Seal Installers
OTC axle shaft seal installers for are designed for use on select Ford F-Series Super Duty trucks that have a vacuum-operated front axle. The drivers are built into the installers, saving you time and money! They correctly install the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage.
( 27 )
$143.99
OTC Harmonic Balancer Pullers
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 74 )
$94.99
OTC Heavy-Duty Motor-Rotor Repair Stands
OTC heavy-duty Motor-Rotor repair stands put a better spin on maintenance of your engines, transmissions, torque converters, and rear axles from your trucks, tractors, and construction machinery. Featuring a 50:1 ratio gear box, these steel stands allow for a full rotation of mounted units with just a turn of the crank and they lock in position. The positive-crank handle locking mechanism ensures engine stability in all positions, and locking rear wheels anchor the stands in position. These extremely stable work-holding units have a twin-post design featuring laterally adjustable, 3-position outboard support. Work safely, more efficiently, and more comfortably standing beside OTC Tools heavy-duty Motor-Rotor repair stands.
( 2 )
$2,118.99
OTC Air/Hydraulic Powertrain Lifts
The OTC air/hydraulic powertrain lifts are built to handle heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more! By facilitating easier and safer handling of powertrain components, these air-hydraulic powertrain lifts can contribute to faster, more efficient repairs, potentially saving time and labor costs. Key features and benefits: * Offers several benefits for automotive and other repair applications—designed for safely lifting and maneuvering heavy components like engines, transmissions, fuel tanks, and electric vehicle batteries * Scissors-type design allows access to all four sides of a component * Powered by an air over hydraulic foot pump for precise lifting and lowering control * Independent adjusting screws tilt the table 15 degree side-to-side, or fore-and-aft, and ensure maximum stability of the table in any position * Large, 8 in. swivel casters accommodate heavy loads * Meets ASME PASE standards
Not Yet Reviewed
$7,605.99
OTC Under Hoist Auxiliary Stands
OTC 1,500 lb. capacity auxiliary stands are used under hoist to provide partial support for positioning of vehicle components during their installation and removal. An adjustable saddle sits atop a fixed column and base, providing high reach assistance for removing or installing vehicle components like transmissions, U-joints, radiators, driveshafts, exhaust systems, and catalytic converters. The adjustment rod features a bearing-mounted T-handle and 5 1/4 in. x 1 1/4 in. U-shape saddle. The OTC under hoist auxiliary stands are designed for rugged daily use by professionally trained vehicle technicians. They're available in standard and foot pedal assist models.
( 7 )
$164.99
—
$179.99
Clearance
OTC Motorcycle and ATV Lift Jacks
These OTC motorcycle and ATV lift jacks will make it much easier to work in the garage. By allowing the handle to be lowered, the user will be able to walk around the lift. These low-profile OTC jacks are perfect for motorcycles with ground clearance issues. Additional features include: * 1,500 lb. capacity * Large 17 in. long skids * Foot pedal release * Locking rear casters * Automatic safety locks * Two ratcheting tie straps for safety
( 21 )
$424.99
$379.50
OTC Engine Preluber Kits
These OTC engine preluber kits ensure that oil is present in internal engine components on the first start of new or rebuilt engines. These OTC kits are used when it is necessary to prime the oil pump and fill the oil galleries and internal engine components with clean, new oil. They connect to the engine oil system at the oil pressure sensor on a variety of domestic and import engines.
Not Yet Reviewed
$373.99
OTC Universal Belt Tensioner Gauges
OTC universal belt tension gauges are used to check your drive belt tension and to ensure maximum belt and bearing life.
( 4 )
$26.99
—
$179.99
OTC 12-Ton Capacity Low and High Jack Stands
These OTC 12-ton capacity jack stands will not dig or sink into asphalt or sand. OTC manufactures these jack stands out of quality steel to ensure performance. Sold individually.
( 1 )
$413.99
—
$456.99
OTC Vacuum/Pressure Gauge Kits
OTC vacuum pressure gauge kits are ideal for testing vacuum lines and components. Quickly diagnose internal engine problems such as bad rings, valves, and leaking head gaskets. These OTC kits comes complete with the necessary adapters, dual scale gauge, and a carrying case.
( 44 )
$45.99
OTC 4,000 lb. Capacity Underhoist Tripod Stands
When you're working under a car lift, OTC Tools underhoist stands are a necessity. These heavy-duty underhoist stands are designed to stabilize the cars or trucks on your lift. They also help to support exhaust, suspension, or drivetrain parts while you're working under a vehicle. OTC underhoist stands are made to provide you with extra comfort and safety, knowing that the vehicle or components that you are working on are properly supported. These stands are available in single leg and tripod styles. Both stands feature heavy steel construction and a quick-adjust, spin-type handle with a thrust bearing.
( 5 )
$262.99
OTC Engine Stands
OTC engine stands are made from heavy-duty materials designed for servicing light truck and car engines. These engine stands have four adjustable mounts to fit most engine blocks and they make work easy with a 24 in. handle to rotate your engine 360 degrees. Fixed polyurethane back wheels and poly swivel castors on the front allow for smooth travel around the garage.
( 1 )
$744.99
OTC Glow Plug Bore Reamers
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
( 1 )
$177.99
OTC Hub Grappler Kits
OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs
( 3 )
$896.99
—
$1,954.99
OTC Ball Joint Super Sets
OTC tools makes it easy to remove and install press-fit ball joints on many light-duty trucks, passenger cars, vans, and SUVs through a range of years. These ball joint sets combine several popular OTC ball joint sets into one affordably priced Super set! The included OTC C-frame tool can be used alone to remove and replace universal joints. OTC ball joint Super sets come complete with an application cross-reference and instructions in a blow-molded case.
( 8 )
$573.99
OTC Revolver Engine Stand Adapter Plates
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 2 )
$452.99
—
$1,951.99
OTC Power Steering Pump Pulley Service Sets
OTC's pulley service sets will cover most domestic vehicles. These OTC sets are made from sturdy materials that will work in a garage or service station setting.
( 30 )
$67.99
