Racing Safety Equipment & Clothing at Summit Racing

Low Range Off-Road Sport Cage Kits

There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.

Not Yet Reviewed

$520.19

—

$954.89

Highway 21 Primary Low Engineer Boots

Highway 21 Primary Low Engineer boots are a little shorter than the Primary Engineer boots, but still retains all the great features as its taller version. These boots feature 100 percent top quality, full grain, water-resistant, oiled leather. The inside of the boot incorporates a HiPora waterproof lining encased by a full length cushioned sock lining. Keep your feet planted with oil-resistant, anti-slip rubber soles. These soles feature Goodyear welt construction for durability. Highway 21 Primary Low Engineer boots can be resoled.

Not Yet Reviewed

$209.95

Allstar Performance Low-Profile Window Nets

Allstar Performance offers low-profile window nets that provide additional safety to the driver. These durable polypropylene window nets are available in a different sizes. Webbing is double-stitched with heavy nylon thread. The border style nets have built-in sleeves in top and bottom of the net to accept most round tube style window net installation kits (sold separately). These boarder style ribbon nets are available in non-SFI and SFI certified options that meet SFI 27.1 specifications and are appropriately tagged. Select the Allstar Performance window net option that is better suited to your needs.

Not Yet Reviewed

$23.99

Zamp Low-Profile Adapters

Zamp low-profile adapters allows you to use round hose in the top mount low-profile air accessory. The rubber connectors create a tight seal to your Zamp helmet. Stay cool; keep the air flowing with Zamp adapters.

Not Yet Reviewed

$10.99

G-FORCE SFI Crew Shoes

G-FORCE SFI crew shoes will keep your pit crew "on their toes." They feature innovative tread sole patterns that provide traction on all surfaces, including dirt, mud, gravel, or asphalt in wet or dry conditions. Built for use by crew members or anyone on their feet all day, these low-top shoes also have covered toe pads for those up-and-down exchanges and heel gel-pad inserts for lasting comfort on all surfaces. Addition features of G-FORCE crew shoes: * Ankle support, heavy-use, athletic shoes * Revolutionary polymer gas and oil-resistant GTrax sole * SFI-approved, with fire-retardant cotton liners * Available in a range of sizes

5.0 out of 5 stars ( 2 )

$99.00

Zamp Helmet Air Vents

If you're running a forced air system on your Zamp Switch RZ-70E or RL-70E helmet, attach one of these Zamp helmet air vents to maximize airflow. These top air vent components will help keep you cool, while looking stylish. Whether it's getting the perfect shield to match your helmet, air vents, chin foam, replacement pads and more—Zamp has got you covered with their extensive line of components and accessories to suit your personal needs.

4.5 out of 5 stars ( 4 )

$47.99

—

$48.99

On Sale

RaceQuip Replacement Face Shields

RaceQuip offers several different helmet face shields to meet any racing conditions that you may encounter. From standard clear replacements to light and dark tint for varying sunlight conditions, and amber for nighttime racing, RaceQuip has you covered. They also offer a mirror smoke shield and a blue iridium-style shield for those who like to look cool while keeping the sun out of their eyes. All shields are made of distortion-free, high-strength polycarbonate and include a visor strip and tear-off posts. SA shields are 3mm thick and M shields are 2mm thick.

4.82 out of 5 stars ( 22 )

$71.69

$64.52

Oakley Airbrake MX Goggles

Riders have to face whatever conditions Mother Nature throws down, so Oakley armed Airbrake MX goggles with their Switchlock technology (the lens is locked securely into the rigid frame) to allow riders to take advantage of Oakley's full armory of lens tints. From daytime practice laps to the nighttime main event, you can match your lens tint and adapt your vision to any environment. Oakley's Airbrake MX goggles set the standards high for protection, clarity, and comfort.

Not Yet Reviewed

$161.00

Stroud Safety Drag Parachutes

Stroud Safety is the leader in the non-rigid aerodynamic decelerator field. Stroud Safety drag parachutes have over 35 years of testing and refinement and are designed to open reliably and softly, pull straight, stop sooner, and be packed easily by one person. They won't pull your car off the ground and they pull low and straight back, stopping your car in much less distance than conventional parachutes. The drag parachutes include a bridal cord, deployment bag, a pack, and a pilot chute. They are available in a variety of colors to complement your car's paint scheme. You'll get down the track and then stop safely with Stroud Safety air launcher drag parachutes!

4.65 out of 5 stars ( 20 )

$428.99

—

$574.99

RaceQuip PRO25 Helmets

RaceQuip PRO25 helmets aren't just SA2025 certified, they're purpose-built for the racers who tighten their belts with one hand and flip the ignition switch with the other. Under their slick aerodynamic profile, the PRO25s pack serious protection: a hand-laid FRP composite shell, energy-absorbing EPS liner, and fire-retardant Nomex® interior. They are designed with wide eye ports to keep your field of vision clear with space left over for your glasses, distortion-free 3mm polycarbonate shields with tear-off posts, and a silicone gasket to seal out dust and dirt. The integrated duckbill chin-spoiler keeps things planted at speed, while venting up top and out the back helps keep your head cool when your race (and the weather) heats up. RaceQuip PRO25 helmets deliver pro-level safety for racers who build it, haul it, and race it themselves. Select the ideal size and color. Features: * Fire-retardant paint, liner, and chin strap * FRP composite shell is lightweight and strong * EPS liner for maximum impact energy absorption * Comfort-fit blended Nomex® fire-retardant interior * Kevlar® chin strap with double D-ring retention system * Reinforced M6 inserts for HANS/Head-and-Neck Restraint compatibility * Anodized aluminum pivot kit with friction-adjust locking mechanism * Tear-off posts with 8-position hand ratcheting system * Distortion-free 3mm polycarbonate low-fog shield * Available in: -- Gloss white, gloss black, and flat black -- Sizes 2X-Small to 3X-Large

5.0 out of 5 stars ( 2 )

$339.95

Stroud Safety Air Launcher Drag Parachutes

Stroud Safety air spring launcher drag parachutes have over 35 years of testing, refinement. They are designed to open reliably and softly, pull straight, stop sooner, and be packed easily by one person. They won't pull your car off the ground and they pull low and straight back, stopping your car in a much shorter distance than conventional parachutes. The parachutes include a pneumatic air-powered launcher that eliminates the pilot chute and their inherent problems. The air spring launcher is designed for cars using an onboard air system and is lighter than the mechanical spring launcher. Get down the track and then stop safely with one of these Stroud Safety air launcher drag parachutes.

5.0 out of 5 stars ( 2 )

$921.99

—

$938.99

Impact Racing Rotary Cam Restraint Systems

Impact Racing rotary cam restraint systems will keep the racer safe. These nylon SFI 16.1 rated driver restraints feature exclusive adjusters which are light, low-profile, and comfortable.

4.93 out of 5 stars ( 15 )

$219.95

—

$359.95

Simpson Hybrid S Restraints

Simpson Hybrid S restraints are not only both FIA and SFI-approved for competition use with multi-point racing harnesses, these head and neck restraint systems have also been tested, and shown, to be compatible with standard 3-point safety belts as found in street vehicles. This allows driving instructors, auto manufacturing test engineers, and other vehicles with 3-point harnesses to have additional protection. Additional details include: * FIA and SFI-approved with 5-, 6-, and 7-point harness systems * FMVSS tested for use with 3-point OEM belt system * High-quality carbon fiber construction * Low-profile (no high back to hook on the bars on exit) * Multiple load paths to dissipate head loads * Buckle attachment in front (no bulky straps underneath) * Installation manual

4.0 out of 5 stars ( 7 )

$1,199.95

—

$1,219.95

G-FORCE Latch and Link Individual Shoulder Harness Webbing Kits

Now you can extend the life of your latch and link safety belts with G-FORCE's new updated webbing kits. Simply affix these belts to your existing hardware and you now have a new harness set at a fraction of the price! Built with proprietary PolyTek low-stretch webbing for elongation control, each 5-point harness with 3 in. shoulder and lap belts meets a new standard of test records that rival anything in the industry. Duckbill latch makes engaging and releasing belts quick and easy. SFI 16.1 certified.

3.67 out of 5 stars ( 3 )

$79.00

Stroud Safety Mechanical Spring Launcher Drag Parachutes

Stroud Safety mechanical spring launcher drag parachutes have over 35 years of testing and refinement and are designed to open reliably and softly, pull straight, stop sooner, and be packed easily by one person. They won't pull your car off the ground and they pull low and straight back, stopping your car in a much shorter distance than conventional parachutes. The included mechanical spring launcher eliminates the pilot chute and its inherent problems. The spring launcher is deployed using a regular pull handle, ideal for cars without an onboard air system. Get down the track and then stop safely with Stroud Safety mechanical spring launcher drag parachutes.

1.0 out of 5 stars ( 1 )

$881.99

—

$1,034.99

FuelTech Peak and Hold PRO Injector Drivers

These FuelTech Peak and Hold PRO injector drivers are advanced modules designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or connection fails. Racing high-flow injectors use low impedance internal coils (with less than 7 Ohms resistance). That allows them to have a much shorter response time than a high impedance injector. These lower impedance coils require a current control, starting with a higher current at opening stage (peak) and lower current when opened (hold), otherwise the injector can quickly warm up and burn. With the FuelTech Peak and Hold PRO injector drivers, it is possible to apply a higher initial current, allowing quick opening of the injector and then reduce the current to, in general, one quarter the peak current.

Not Yet Reviewed

$449.00

Simpson Motorcycle Outlaw Bandit Carbon Fiber Helmets

The Simpson Motorcycle Outlaw Bandit carbon fiber helmets give you the performance you need and the style you demand. Meeting Snell M2020 and DOT safety ratings, the 3.0 Outlaw Bandit helmets feature a new shield and ratchet kit system that allows the shield to remain open at speed when hot weather demands maximum airflow. There is no greater sense of freedom than riding a motorcycle on a wide-open road or hitting the track on your two-wheel machine. No other form of transportation intertwines man and machine the way a motorcycle does. Whether you are hitting the backroads for a weekend cruise or hitting the race track and pushing the limit, stay protected with motorcycle gear from Simpson. Features of Simpson's motorcycle Outlaw Bandit carbon fiber helmets: * Original Outlaw Bandit shape, style and fit * Lightweight carbon fiber shell * Available 3 shell sizes for optimum outer profile * Free flow chin vents use low pressure to pull air out of helmet at speed * New 4-position shield, locked down and three open positions that stay open at speed * Optimized one size shield for all helmet sizes * Shield ratchet system * DOT and SNELL certified Note: Helmet ships with clear shield, optional shields will be available in the near future. Current Outlaw Bandit shields/pivot kits do not work with new Outlaw Bandit 3 helmets.

Not Yet Reviewed

$699.95

Simpson Racing Turbine Driving Shoes

Introducing the next generation in driving shoes—the Simpson Racing Turbine! These high-top driving shoes offer great comfort, feel, style, and wear protection, making them the ultimate all-around driving shoe. They are constructed from satin suede and have a Nomex fire-retardant lining. A specially formulated non-slip sole provides great flexibility, posi-grip, and the ultimate pedal feel. For added wear protection, the toe of the shoes are protected by a high abrasion-resistant toe guard. The low-cut Achilles support provides maximum flexion and comfort, which make the Simpson Racing Turbine shoes a great choice for those long race days. Product highlights: * SFI 3.3/5 certified, includes SFI tag * Single lace containment strap * Low cut Achilles support * Nomex and lining * Abrasion-resistant toe guard * Non-slip sole with a wrap up padded heel provides ultimate pedal feel * Available in a range of shoe sizes and colorway options

Not Yet Reviewed

$167.95

RaceQuip PRO20 Top Air Helmets

RaceQuip PRO20 Top Airs are Snell SA2020-rated, full-face auto racing helmets that incorporate contemporary styling with modern production techniques. These helmets are referred to as forced-air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super-low profile that will fit any car utilizing a standard 1.250 in. barbed fitting, so air flows down the face shield for cooling and anti-fogging. The shell uses pressurized steel molds to achieve the best combination of strength and lighter weight. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so these helmets are suitable for all motorsports. If you need or prefer a full-face helmet with down-flow air, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip PRO20 Top Air helmets include: * Lightweight pre-preg composite shell * Expanded polystyrene (EPS) liner mated to shell * Reinforced M6 threaded HANS/HNR inserts also mated to shell for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Distortion-free 3mm polycarbonate face shield with red anodized aluminum pivot kit * Hand-ratcheting tear-off posts * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Comfort-fit blended Nomex interior helps keep your scalp cool * Aero-design with medium-sized chin spoiler * Available in different colors and sizes

Not Yet Reviewed

$236.99

—

$699.95

On Sale

RaceQuip VESTA20 Helmets

RaceQuip's VESTA20 Snell SA2020-rated, full-face auto racing helmets are a bold departure from tradition. They use contemporary styling with modern production techniques, including a shell formed with pressurized steel molds to achieve the best combination of strength and lighter weight. These innovative models feature FRP composite shell construction and uniquely-shaped chin bar to support a scalloped face shield design. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so these helmets are suitable for all motorsports. If you prefer a bold, full-face helmet, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip VESTA20 helmets include: * Hand-laid, fiber-reinforced polymer (FRP) shell * Expanded polystyrene (EPS) liner mated to shell * Reinforced M6 threaded HANS/HNR inserts also mated to shell for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Distortion-free, 3mm polycarbonate low-fog face shield with a molded thumb catch * Red anodized aluminum pivot kit with adjustable friction lock * Hand-ratcheting tear-off posts (8 positions) * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Extra set of thicker cheek pads for a customized fit * Comfort-fit blended Nomex interior with back and top exhaust vents for keeping your scalp cool * Bold, edgy styling with a goggle-type shield * Available in different colors, finishes, and sizes

5.0 out of 5 stars ( 2 )

$429.95

—

$449.95

$236.95

—

$247.95

Impact Racing Latch and Link Driver Restraint Systems

Impact Racing SFI 16.1 rated nylon latch and link driver restraint systems keep racers safe. Their exclusive adjusters are light, low-profile, and comfortable. These latch systems work like locking ratchets to prevent webbing creep.

4.19 out of 5 stars ( 16 )

$109.95

—

$174.95

G-FORCE Pro Series Camlock Harness Sets

G-FORCE Pro Series camlock harnesses are constructed from new proprietary PolyTek low-stretch webbing and a high-quality cam buckle. Funnel-style receivers in the camlock make plugging in the belts a snap! They feature an ultra-lightweight magnesium case and a high-tech, quarter-turn mechanism. Each belt will rotate up to 40 degrees and move up and down 10 degrees to conform to the driver's body. This provides an extra measure of comfort compared to other camlock buckles. These harness sets are available in a variety of styles and options.

4.46 out of 5 stars ( 13 )

$169.28

—

$269.10

RaceQuip PRO20 Side Air Helmets

RaceQuip PRO20 Side Airs are Snell SA2020-rated, full-face auto racing helmets that incorporate contemporary styling with modern production techniques. These helmets are referred to as forced-air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. Air is plumbed into the left side of the helmet through a standard 1.250 in. barbed fitting, so air flows across the face shield from left to right for cooling and anti-fogging. The shell utilizes pressurized steel molds to achieve the best combination of strength and lighter weight. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so these helmets are suitable for all motorsports. If you need or prefer a full-face helmet with side-flow air, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip PRO20 Side Air helmets include: * Exceeds Snell SA2020 rating * Lightweight pre-preg composite shell * Expanded polystyrene (EPS) liner mated to shell * Reinforced M6 threaded HANS/HNR inserts also mated to shell for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Distortion-free, 3mm polycarbonate low-fog face shield * Aluminum pivot kit with adjustable friction lock * Hand-ratcheting tear-off posts (8 positions) * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Comfort-fit blended Nomex interior with top and back exhaust vents help keep your scalp cool * Modern design with medium-sized chin spoiler * Available in a variety of sizes

5.0 out of 5 stars ( 7 )

$419.95

Fly Racing Werx-R Carbon Helmets

As one of Fly Racing's lightest and most feature-packed full face helmet offerings, the Werx-R Carbon helmets are perfect for demanding racers and riders. Beneath the lightweight and puncture-resistant 12K carbon fiber shell, the Werx-R helmet features triple-density protective EPS foam to absorb various types of impacts, with strategically-placed zones with increased volume of EPS foam for added safety. RHEON Impact Energy Cells help to reduce low-speed impact forces from linear and rotational impacts, further improving brain protection. For hot days, Fly's True Functional Ventilation (TFV) directs air into multiple intake vents, through internal channels and out of rear exhaust vents, keeping air moving even at low speeds. Available in either adult or youth sizes, in a range of color/design options, choose the Werx-R Carbon helmet that you require. Key features: * 12K carbon fiber shell that is extremely lightweight shell with superior penetration resistance * 2 shells with 4 specific EPS for a perfect fit throughout the size range for adult and youth riders * (AIS) Adaptive Impact System * Triple Density EPS provides a more progressive response to impact forces * Expanded volume EPS—strategic areas of the helmet have more impact absorbing EPS, more suspension between your head and the ground * True Functional Ventilation forces air through multiple air intake vents, then passed through aligned vent channels in the EPS and exits out multiple rear exhaust vents * RHEON Impact Energy Cells which maximize absorption of low speed linear and rotational impacts, reducing forces transmitted to the brain * Quick Release cheek pads aid in emergency helmet removal * CoolMax removable washable and replaceable comfort lining system * Titanium plated rivets for aesthetics * Premium helmet bag included * Optional replacement parts and accessories available (sold separately)

Not Yet Reviewed

$639.95

Racing Safety Equipment, Clothing & Gear