Availability
Showing In Stock Items. Show All 157 Items.
Summit Racing™ single stage paints are top-of-the-line automotive and fleet color systems. These single-stage urethane topcoats are available in a variety of color packages. Urethane paints are catalyzed systems, offering a premium finish with exceptional durability that far surpasses enamel-based systems. Manufactured with top-quality raw materials and advanced technology, these paints will never yellow with age. They are designed to be used in a single-stage application or in combination with a urethane clearcoat (except hot rod black) for additional durability and gloss. Summit Racing™ single stage paints are also highly resistant to harmful UV exposure, dangerous chemicals, everyday weathering, and aggravating stone chips. They mix at a 4:1 ratio, so when a gallon of paint is mixed with our activator (sold separately), you get a full 5 qts. of usable paint. All of our Summit Racing™ urethane paint colors are unique. They are not designed or intended to match a factory color or a color of another paint brand, even if the color name is the same or similar. Requires the use of activator for proper finishing. Color may vary depending upon your monitor settings. Please see suggested parts tab for chip chart for colors.
( 565 )
$101.99
—
$151.99
LizardSkin Original Ceramic Insulation is a water-based composition of high-grade acrylic binders with air filled reflective and sound absorbing ceramic particles. LizardSkin is non-toxic and Class A fire-rated. LizardSkin is an innovative easily applied coating system designed to diminish both heat and sound. Applied by spray method it forms a sealed, seamless and flexible black membrane, perfect for cars and trucks, street rods and customs, race cars, buses, refrigerated trailers, RVs, motor homes, experimental aircraft, and high end audio installations---wherever heat and noise are a problem. LizardSkin is completely water soluble, meaning easy clean-up with just soap and water. Each 2-gallon container covers 46-50 square feet with .040-.060 in. thickness.
( 79 )
$168.99
—
$179.99
If you like that "hot rod flat" finish that's all the rage with the rodders and custom car builders, Summit Racing™ hot rod flat paints are available in your choice of colors! These single-stage paints are top-of-the-line for your project. Designed for the DIY painter, Summit Racing™ hot rod flat paint is easy to apply; the flash time between coats is just minutes, and it dries in less than an hour. By eliminating many of the complicated application steps, you are able to reduce the overall cost of your refinishing project! Summit Racing™ hot rod flat paint is designed for use with our complementary line of primers, sealers, reducers, hardeners, cleaners, and specialty additives, and is formulated to provide professional-grade results at home. Summit Racing™ single stage urethane paint is also highly resistant to harmful UV exposure, dangerous chemicals, everyday weathering, and aggravating stone chips. It mixes at a 4:1 ratio, so when a gallon of paint is mixed with our activator (sold separately), you get a full 5 quarts of usable paint. All of our Summit Racing™ Urethane paint colors are unique. They are not designed or intended to match a factory color or a color of another paint brand, even if the color name is the same or similar. Requires the use of activator for proper finishing. Color may vary depending upon your monitor settings. Please see suggested parts tab for chip chart for colors.
( 136 )
$101.99
—
$147.99
Call on POR-15 to restore your car with a rock-hard, non-porous finish that won't chip, crack, or peel. This paint also prevents recurring rust by sealing your metal against exposure to moisture. The high-tech, high performance, rust-preventive coating is designed for direct application on rusted metal surfaces—and it not only covers the existing rust, it also prevents the reoccurrence of rust. Available in clear, black, silver, and gray, POR-15 is ideal for a quick improvement. Choose gloss or semi-gloss, in sizes ranging from a pint to a gallon. POR-15 is sensitive to ultraviolet light and should have a topcoat applied to prevent UV damage, especially in areas that will be exposed to the sun for extended amounts of time.
( 313 )
$217.38
Summit Racing™ Premium Urethane Bedliner coating restores and protects pickup truck beds, floor pans both interior and exterior, trunk interiors and other worn surfaces. This protective spray-on coating is a durable, 2-component urethane that's easy to use—and provides a textured, satin finish that makes any surface look brand new. It has excellent UV and chemical resistance, and outperforms the current market leader in impact resistance and durability. Summit's® Bedliner comes in a kit with five individual quart bottles, 75 percent full, that you simply add the activator to. An applicator gun is also included for even greater value.
( 15 )
$179.99
Summit Racing Equipment® 2-stage system low 2.1 VOC clear coat is a high-solid urethane, rated at just 2.1 VOC. It provides the same excellent gloss, leveling, blending, and buffing characteristics as our standard 2-stage clear coats, so you can meet strict volatile organic compound standards without sacrificing quality. It's fast-drying, easy-to-apply, and requires mixing in a 4:1 ratio with Summit Racing™ 2.1 VOC clear coat hardener.
( 86 )
$119.99
Evercoat Optex Super Build 4:1 Primer is a patent-pending product with built-in guide coat that eliminates the first guide coat step. It highlights dents, low spots, scratches and other surface imperfections, while at the same time eliminating the need for messy carbon black powdered guide coats. Optex Super Build 4:1 Primer sprays on pink and turns gray as it's sanded, revealing high spots, while low spots and scratches remain pink. For innovative repair solutions that perform, choose Evercoat products. Additional features and specs: * Ultra-high-build polyester primer surfacer * Adheres to a broad range of substrates, including bare metal, aluminum, fiberglass, rigid plastic, body filler or putty * Direct to metal application eliminates the need for epoxy or self-etch primers * Easy sanding * Waterborne paint compatible and VOC-compliant
( 5 )
$156.99
Create the best satin finish custom look with Hot Rod black kits from SEM Products Color Horizons! With these Hot Rod kits, you'll have a durable 2K matte finish that resists chalking and fading. SEM Color Horizons kits are single-stage topcoat systems offering outstanding color retention, sprayability, and superior mar resistance for a beautiful, buff-free finish. Each kit contains Hot Rod black, catalyst, and reducer. Add a cool look to your rod with SEM Products Color Horizons Hot Rod black kits--flames and moon caps not included!
( 24 )
$130.99
—
$152.99
House of Kolor Kosmic Urethane Show Klear clearcoat is produced using state-of-the-art technology. This formula is the most robust clear that House of Kolor has made, with excellent chemical, water, and fuel resistance, along with the highest UV protection in the industry! House of Kolor Kosmic Urethane Show Klear offers unbeatable flow-out, gloss, and distinctness of image after 48 hours. This medium solids product meets all VOC rules and regulations coast to coast, and is ideal for use on all size vehicles, from compact cars to large trucks. Get the show-ready finish you crave with House of Kolor Kosmic Urethane Show Klear!
( 1 )
$265.99
You're restoring frames, chassis components, and underhood parts. Do you need help? Call on the rust-busters at POR-15. Their engineers have rust on the run with their tested and proven technology. POR-15 Top Coat paint is one of several specialized topcoats that you can use over POR-15 rust preventive paint for the toughest, most permanent defense against rust and corrosion. These topcoats are highly flexible, extremely scratch and chip-resistant, and non-porous to seal out moisture. No moisture means no rust. Restoration takes a lot of time and money. Why let your dream ride become a pile of rust? POR-15 Top Coat paint is armor for your restoration project. Choose the gloss or semi-gloss needed in a pint, quart, gallon, or 14 oz. spray can.
( 89 )
$172.12
Mix our Summit Racing Equipment® 2.1 VOC primer sealers 5:1 with a fast or medium 2.1 VOC primer sealer hardener. You can even blend sealers to create a full range of grayscale tones to best match your top coat. These acrylic urethane paints are available in gallon or quart sizes—in shades of black, white, or silver/gray.
( 71 )
$104.99
—
$112.99
Get a showroom-worthy garage floor surface with Rust-Oleum Epoxy Shield garage floor coatings! Designed for indoor use, these coatings protect your floor from gasoline, antifreeze, motor oil, salt, and hot tires. Rust-Oleum Epoxy Shield garage floor coating kits include: * Water-based epoxy coating * Concentrated cleaner * Decorative chips * Stir stick * Paper instructions * Instructional video
( 3 )
$124.99
—
$153.99
Summit Racing Equipment® 2.1 VOC high-build primer works as the glue that holds your paint in place. Choose your primer based on the material and condition of the surface to be painted. It mixes with 4:1 with hardener.
( 35 )
$103.99
Add vivid color, dramatic depth, excellent gloss, and great metallic control to your next painting project with Summit Racing™ 2-Stage System base coat paint. These base coat paints are the first stage of these great 2-Stage Systems and feature a variety of timeless, classic hues and today's hottest colors, all formulated for durability and long-term fade resistance. Just mix them 2:1 with Summit Racing™ 2-Stage System base coat reducer, add 1 oz. of clear coat hardener to each ready-to-spray quart, and pull the trigger. The flash time between coats is just minutes, and your project will be dry and ready for the 2-Stage System clear coat in less than an hour. Base coats are also available in low-VOC formulations. See your project come alive with the "killer" colors of Summit Racing™ base coat paint.
( 79 )
$212.99
—
$219.99
SEM Products Rock-It XC liner is a high-quality urethane textured coating. It's perfect for finishing truck beds, recreational vehicles, industrial equipment, restoration, and more! The product is available in glossy black or tint able gray opaque, and it's resistant to chemicals, UV rays, and fading. Each kit contains four quart bottles 80 percent filled with the liner material, one quart of Rock-It XC Catalyst, and one economy coating gun. Additional features: * Produces a variety of textures, depending on application (coating gun, HVLP gun, roller, or brush) * Durable coating maintains flexibility * Excellent for sound dampening * Outstanding adhesion to most surfaces * 50-state compliant Liner can be applied to these properly prepared surfaces: steel, aluminum, galvanized, existing OEM paint, polyester fillers, E-coat, fiberglass, SMC, GRP, plastics, wood, and concrete.
( 7 )
$248.99
—
$281.99
House of Kolor Catalyst is for use with House of Kolor Kandys and Kosmic Kolor Solid Kolors. Due to their unique chemistry, House of Kolor Catalyst should never be substituted with other brands of catalysts.
( 2 )
$124.99
Summit Racing™ 2.1 VOC 2K high build DTM primer is a 2-component, low-VOC primer that can be applied directly to small areas of bare metal, as well as to OEM finishes, fiberglass, sheet molding compounds, and refinishing lacquers, enamels, and urethanes. Mix it in a 7:2 ratio with 2.1 VOC 2K high build DTM primer hardener, apply two or three wet coats, and in 90 minutes, it's dry and ready to sand. This low-VOC primer has fewer of those pollutants and terrible odors, so it's better for you and the environment.
( 17 )
$131.99
Rust-Oleum RockSolid garage coat floor coatings offer unsurpassed durability because the Polycuramine foundation is 20 times stronger than epoxy. Resistance to salt, oil, gas, and other harsh chemicals make RockSolid products one of the toughest floor coatings on the planet. The finished floors are easy to maintain and will last a lifetime while still looking fantastic. Zero VOCs in the garage coatings also make them environmentally friendly, limiting the harmful chemicals involved to an absolute minimum. Even the packaging is environmentally safe …easy-to-use pouches instead of cans, which reduces the waste sent to landfills. Rust-Oleum RockSolid garage coat floor coatings can be applied year-round in temperatures between 0 to 120 degrees F. (By contrast, most epoxy coatings require specific temperature ranges from 60 to 80 degrees F).
( 53 )
$147.99
—
$263.99
Rust-Oleum RockSolid Polycuramine clear top coat floor coating is the final layer applied over any of the three specialized finishes: metallic, vinyl chip, and colored stone. Each of those RockSolid system applications are 20 times stronger than epoxy, so they won't crack or peel, and they're resistant to salt, oil, gas, and other harsh chemicals. This high-gloss protective coating increases the durability--and can also be spread onto bare concrete for a clear, strong finish. RockSolid top coat is recommended for high traffic areas, including a professional garage or handyman's shop floor. The product is low-odor and contains no VOCs. Available in smooth or textured finish.
( 16 )
$201.99
—
$209.99
Rust Bullet BlackShell protective paint combines function and beauty in one tough UV-resistant gloss-black coating. It provides armor-tough, chip-resistant, stand-alone protection. It can be applied over Rust Bullet's rust inhibitor for the ultimate in corrosion protection.
( 29 )
$189.99
SEM Products Metalock DTM high-build primer is a direct-to-metal epoxy primer designed for metal, aluminum, SMC, and fiberglass. It utilizes the latest technology to provide superior adhesion, corrosion protection, and exceptional sanding properties--creating a solid and dependable foundation for any project.
( 13 )
$211.99
KBS Xtreme Temperature Coatings are high-temperature and heat-resistant coatings specifically formulated to protect metal surfaces operating at temperatures from 500 degrees F (260 degrees C) to 1,500 degrees F (812 degrees C). KBS XTC coatings provide outstanding adhesion, film integrity, weathering, and thermal shock resistance throughout the entire temperature range and are guaranteed not to burn off! They won't peel, flake, or chalk and are resistant to scratching and marring, so they're perfect for mufflers, headers, BBQ grills, and much more. XTC is offered in a several colors for you to choose from!
( 28 )
$218.99
SprayMax 2K Hot Rod black paint is great for small damage repair jobs on existing semi-gloss hot rod black parts/surfaces, or for an easy and fast paint job of a new or restored part. Advantages include: * Easy-to-use aerosol * High-quality 2-component coating * Very good flow * Highest chemical and weather resistance * Long-lasting and very durable finish
( 13 )
$167.99
SEM Products Rust-Mort stops rust dead in its tracks! This formula converts existing rust into a hard, insoluble, protective coating prior to applying body filler, primer, or top coat. Rust-Mort products are great for use in auto body, marine, industrial, farm, and home applications. SEM Products Rust-Mort protects new metal and gives new life to rusty panels quickly and easily.
( 39 )
$129.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
