Availability
Summit Racing™ Gasgacinch gasket dressing holds your gaskets in place while you position them for a perfect fit. The convenient applicator top allows you to dress your gasket and flanges with a light coat. Let it set up for at least 5 minutes and you're ready to perfectly position each gasket and complete your assembly. Plus, cleanup is a breeze! Choose the container volume needed, then seal every gasket you install with gasket dressing.
Not Yet Reviewed
$13.99
Summit Racing™ RTV black silicone is a low volatile sealant-adhesive that can be used on metal, glass, wood, ceramics, rubber, and most plastics. As an instant gasket maker, this product replaces a wide range of paper, cork, asbestos, felt, and metal gaskets. It has excellent adhesion characteristics and high chemical resistance; the spray will not sag or shrink, and is even impervious to temperature extremes. RTV black silicone is safe for use on oxygen sensor equipped vehicles; it remains permanently flexible, has a temperature range of -60 degrees F to +500 degrees F, and meets or exceeds mil spec (MIL-A-46106). For best adhesion results, the surface must be clean, dry, and free from oil, tar, dirt, and dust.
( 38 )
$17.99
These are the same sealant kits that you receive when you buy one of our Summit Racing™ Engine Shop rebuild kits. These kits include bolt sealant, cam and bearing lube, thread locker, anaerobic sealant for the rear main seal, Plastigage, rod bolt sleeves, and a tube of Ultra Black RTV silicone.
( 4 )
$35.99
Summit Racing™ HD Spray Adhesive is a fast-drying, heat-resistant, all-surface formula with a 3-way web spray nozzle (low, medium, and high). This high-strength aerosol is simple to use: shake the can vigorously for one minute (after mixing ball begins to rattle), and then select the spray pattern by rotating the nozzle to the desired position. Spray evenly on both surfaces that need to be adhered to one another, allowing them to dry 1 to 3 minutes (but no more than 30 minutes), and then align and press the two surfaces together. When you need to make it stick, use our Summit Racing™ HD Spray Adhesive!
( 12 )
$11.99
Summit Racing™ adhesion promoters could be step 2 to your stunning paint job! Working just like a clear primer, our adhesion promoters provide maximum "grip" on smooth surfaces. They are ideal for plastic and urethane surfaces or hard-to-paint bare metal or chrome. Pick up a quart to brush on or a can to spray smaller jobs. Get your flexible bumper covers, body kits, and the like ready for sealing, painting, and clear coating with Summit Racing™ adhesion promoters.
( 1 )
$42.99
Summit Racing™ silicone protectant spray is a special coating for professional and industrial use only. This product provides a water-resistant, high-gloss shine to brighten any plastic or vinyl surface. It's great for those hard-to-reach places and makes items look factory-like new. Plus, it smells good, too! To use: apply two or more coats rather than one heavy coat. For best results, spray this product at 70 to 80 degrees F. If desired, you can polish the surface using a soft cloth after allowing this innovative silicone protectant spray to dry for a few minutes.
( 1 )
$11.99
Summit Racing™ Non-Sag Seam Sealer is a 2-part epoxy adhesive specially designed for sealing interior and exterior seams, joints, and voids. It's easy to use, remains flexible, has a fast cure time, and cures at room temperature. This product requires a 2:1 mixing/applicator gun, which is not included. Additional details: * Excellent adhesion direct to metal * Paintable immediately with any solvent based coating * OEM recommended * Non-Sag Flexible Seam Sealer can be used vertically or horizontally * Work time 12-16 minutes * Cure schedule 20 to 30 minutes at 23 degrees C or 74 degrees F. Full cure in 24 hours * Can be rapidly cured with heat
Not Yet Reviewed
$29.99
Summit Racing™ RTV red silicone is a low volatile sealant-adhesive that can be used on metal, glass, wood, ceramics, rubber, and most plastics. As an instant gasket maker, this product replaces a wide range of paper, cork, asbestos, felt, and metal gaskets. It has excellent adhesion characteristics, high chemical resistance, will not sag or shrink, and is even impervious to temperature extremes. RTV red silicone is safe for use on oxygen sensor-equipped vehicles, remains permanently flexible, has a temperature range of -60 degrees F to +650 degrees F, and meets or exceeds mil spec (MIL-A-46106). For best adhesion results, the surface must be clean, dry, and free from oil, tar, dirt, and dust.
( 1 )
$16.99
Summit Racing™ Fast Set Plastic Bonding Adhesive is a rapid curing 2-part polyurethane adhesive. Specially designed for quick repair of automotive plastics, it sets up in less than a minute. This product is easy to use and maintains its strength over a wide temperature range. Additional details: * Excellent peel and impact strength * Superior environmental resistance * Bonds most plastics (except TPO) and is paintable * Working time 30-60 seconds minutes; sandable in 20-30 minutes * Full cure in 24 hours * Required mixing/applicator gun is not included
( 1 )
$30.99
Summit Racing™ silicone protectant spray is a special coating for professional and industrial use only. This product provides a water-resistant, high-gloss shine to brighten any plastic or vinyl surface. It's great for those hard-to-reach places and makes items look factory-like new. And it smells good, too! To use: apply two or more coats rather than one heavy coat. For best results, use the aerosol at temperatures between 70 to 80 degrees F. If desired, you can polish the surface using a soft cloth after allowing this innovative silicone protectant spray to dry for a few minutes. Bulk orders are available in a set of six cans.
Not Yet Reviewed
$64.75
Summit Racing™ Plastic Bonding Adhesive is a fast curing 2-part epoxy adhesive specially designed for automotive plastic repair. It's ideal for quickly repairing bumper brackets, tabs, headlight buckets, and grilles. The product may also be used for bonding backer panels, moldings, emblems—and small plastic, metal, and aluminum parts. Plastic Bonding Adhesive is easy to use and maintains its strength over a wide temperature range. Additional details: * Excellent peel and impact strength * Superior environmental resistance * Bonds most plastics (except TPO) and is paintable * Working time 4-6 minutes; sandable in 30-40 minutes * Full cure in 24 hours
Not Yet Reviewed
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
