Automotive Ignition & Electrical Supplies at Summit Racing

SKF Bearings Alternator Replacement Bearings

SKF alternator replacement bearings will fit directly into your current alternator. They are designed uniquely for each make/model available. Use only the most trusted bearing in the industry, SKF!

Not Yet Reviewed

$12.99

Timken Alternator Replacement Bearings

Timken alternator replacement bearings keep your alternator spinning energy. Timken is a name known worldwide that you can count on for performance bearings. Available for different automotive applications, Timken alternator replacement bearings keep your components running more smoothly and efficiently.

5.0 out of 5 stars ( 2 )

$9.99

FAG USA ABS Wheel Sensor Wiring Harnesses

FAG USA offers ABS wheel sensor wiring harnesses for a wide range of applications—including Ford, Dodge, Ram, Chevy, GMC, Cadillac, Ford, Mazda, and Mercury models from the 1980s and up. These harnesses help to maintain the stability and safety of your vehicle. As chassis specialists, FAG supplies all the components necessary with your anti-lock brake sensors for a complete install.

Not Yet Reviewed

$134.99

Tuff Stuff Performance Alternator Repair Kits

Keep your Tuff Stuff Performance alternators power-perfect with service help from a Tuff Stuff alternator repair kit. These small parts and/or bearings kits are intended for specific alternator models. Proper maintenance can deliver like-new performance to power your vehicle's electrical components. Order the repair kit recommended for your unit.

4.65 out of 5 stars ( 20 )

$39.99

—

$42.99

Tilton Replacement Starter Drive Assemblies

If it's time to rebuild your starter, then get one of these Tilton replacement starter drive assemblies to get the job done. They include a new pinion gear, sprag assembly, bearing set, cap, and clip. Available for different series of starters, the Tilton replacement starter drive assemblies will keep your starter operating consistently.

Not Yet Reviewed

$221.00

Tilton Replacement Starter Pinion Gears

Are you looking for a replacement starter pinion gear? Look no further--Tilton has you covered. These pinion gears are made of high-quality material to suit your needs.

4.5 out of 5 stars ( 4 )

$92.65

Yukon Gear & Axle ABS Tone Rings

ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.

5.0 out of 5 stars ( 3 )

$18.99

On Sale

Summit Racing™ Mini High-Torque Starters

You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.

4.49 out of 5 stars ( 701 )

$235.99

$147.99

—

$225.99

On Sale

MSD Pro-Billet Distributors

MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

4.75 out of 5 stars ( 406 )

$749.95

$389.95

—

$849.95

MSD Pro-Billet Ignition Bundles

MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector

5.0 out of 5 stars ( 3 )

$716.95

—

$767.95

MSD Pro-Billet Ready-to-Run Distributors

MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.

4.33 out of 5 stars ( 330 )

$511.95

—

$870.95

Tuff Stuff Performance High-Amp Output Factory Cast-Plus Alternators

A Tuff Stuff Performance high-amp output factory cast-plus alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available; and the cast-plus finish is applied in the company's Cleveland, Ohio factories. This leaves a natural cast look but offers extreme durability from pitting. The alternators are available in a variety of amperages, case and pulley styles for fitment on thousands of specific vehicle applications.

4.54 out of 5 stars ( 733 )

$104.99

—

$931.99

Summit Racing™ Ready-to-Run Billet Distributors

Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.

4.1 out of 5 stars ( 29 )

$225.50

—

$359.99

Summit Racing™ Billet Distributors

Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.

4.51 out of 5 stars ( 166 )

$188.99

—

$304.99

On Sale

MSD DynaForce Starters

MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.

4.55 out of 5 stars ( 242 )

$641.95

$362.77

—

$634.95

Summit Racing™ Digital RTR Plus Billet Distributors

We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.

4.67 out of 5 stars ( 6 )

$349.99

—

$389.99

MSD Pro-Billet Locked-Out Distributors

MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.

4.63 out of 5 stars ( 32 )

$479.95

—

$511.95

MSD Pro-Billet HEI Distributors

The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.

4.63 out of 5 stars ( 38 )

$665.95

—

$716.95

MSD Pro-Billet Street Distributors

MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.

4.78 out of 5 stars ( 115 )

$449.95

—

$716.95

Tilton Severe-Duty Super Starters

Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.

4.06 out of 5 stars ( 35 )

$433.50

—

$561.00

PerTronix Flame-Thrower Plug and Play Billet Distributors with Ignitor II® Module

PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.

4.22 out of 5 stars ( 359 )

$272.10

—

$464.15

MSD Pro-Billet LT1 Distributors

Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.

3.95 out of 5 stars ( 64 )

$819.95

BluePrint Engines Pro Billet Ready to Run Distributors

BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No

5.0 out of 5 stars ( 5 )

$225.99

—

$299.99

MSD Pro-Billet Ready-to-Run Marine Distributors

MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.

4.13 out of 5 stars ( 16 )

$716.95

—

$819.95