Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
2011 Electrical Wiring
Summit Racing™ MDS Solenoid Plugs
Summit Racing™ MDS solenoid plugs are designed to plug the hole where the old MDS solenoids used to live. Commonly used when swapping MDS engines into older non-MDS cars or retro fitting non-MDS cams.
( 4 )
$40.99
Wiring Specialties Pro Series Coil Pack Harnesses
Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee
( 27 )
$169.99
ACDelco Spark Plug Wire Sets
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 156 )
$67.99
Painless Performance GM Gen IV Vortec Truck Engine Wiring Harnesses
Painless Performance GM Gen IV Vortec truck engine wiring harnesses are designed to operate any Chevrolet Gen IV engine coupled with a 4L65E, 4L70E, 4L80E, or 4L85E automatic transmission. They cannot be used with a 4L60E transmission because it's missing the input speed sensor required by the transmission control module. The harnesses support engines with or without cylinder deactivation and/or variable valve timing. They feature an integrated weatherproof fuse block. Painless Performance GM Gen IV Vortec truck engine wiring harnesses have 10 fused power circuits, including injectors, ignition coils, oxygen sensors, ECM ignition, MAF/VLOM, and fuel pump. They also use an integrated 30 amp fuel pump, 40 amp cooling fan relays, and two ignition relays. The harnesses have an extra 4 ft. of length between the ECM connections and the main engine breakout.
( 1 )
$840.99
ICT Billet LS Ignition Coil Wiring Harness Extensions
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$43.99
—
$105.99
Morimoto Projector Headlight Conversion Harnesses
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
FiTech Transmission Control Harnesses
Whether you want to add an automatic transmission to your vehicle with a FiTech fuel injection system or need to replace a damaged harness, FiTech transmission control harnesses get the job done. Repair or customize your vehicle's sensor layout the proper way with the FiTech transmission control harness designed for your application.
( 1 )
$153.00
Chevrolet Performance Camshaft Position Sensor Pigtails
The camshaft position sensors on your engine will only work with the correct pigtail connections. Chevrolet Performance offers these pre-made pigtails to properly fit the crank position sensor or the cam position sensor on select models. Trust Chevrolet Performance for OEM wiring replacement parts and more!
( 5 )
$44.99
ICT Billet LS VVT to Non-VVT Camshaft Sensor Adapters
ICT Billet LS VVT to non-VVT camshaft sensor adapters convert your VVT harness to a non-VVT sensor. These harnesses are plug-and-play and are assembled using OEM tooling with OEM Delphi connectors and terminals. Order the model recommended for your vehicle and engine application.
( 4 )
$43.99
Fleece Performance Wiring Pigtails
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 4 )
$14.99
—
$59.99
ICT Billet Throttle Body Extension Harnesses
ICT Billet throttle body extension harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. Don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. ICT Billet throttle body extension harnesses provide quality you can trust. Order the model recommended for your application.
( 1 )
$43.99
ACDelco Wiring Connectors
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 36 )
$2.99
—
$140.99
aFe Control Suspension Logic ESD Kits
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$370.00
—
$435.00
ICT Billet Wiring Pigtails
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 11 )
$22.99
—
$58.99
Fleece Performance Charging Circuit Harnesses
Due to the routing, exposure, and general lack of protection on the small charging circuit sense wires that are routed from Powertrain Control Module (PCM) to the alternator, it is common for wire damage to be experienced. And if the charging circuit MIL illuminates intermittingly or continuously on your truck dash, this may be your problem. A Fleece Performance charging circuit harness is your fix. These harness solutions are drop replacements—no cutting or splicing--for failed factory harnesses causing the problem. Each one installs directly in-line with factory connections, allowing you to reroute the alternator connection along the top side of the engine, and avoiding the unprotected channel routing on the underside of the engine. Designed and produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the road quickly.
Not Yet Reviewed
$125.99
AutoLoc Electric Window Crank Switches
AutoLoc electric window crank switches allow you to operate your power windows with your vehicle's original window crank handle. This eliminates the need to mount aftermarket switches in your door panels. To operate your electric window, simply rotate the window crank up or down 15 degrees. To ensure safety, AutoLoc offers a positive dead lock stop and a return-to-center spring design, which creates a heavy-duty system that won't break or snap. These switches are made of billet aluminum and stainless steel fasteners, and will work with your factory window crank to give your vehicle a traditional look. They're available in multiple shaft styles—and are ideal for all vehicles, including hot rods, custom trucks, and cars!
( 12 )
$199.95
FiTech Oxygen Sensor Sub Harnesses
Whether you want to add a second O2 sensor to your FiTech fuel injection system or need to replace a damaged harness, FiTech oxygen sensor sub harnesses get the job done. Repair or customize your vehicle's sensors the proper way with the FiTech oxygen sensor sub harness designed for your application.
( 2 )
$58.00
ICT Billet Wiring Harness Extensions
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
ICT Billet Camshaft Position Sensor Adapter Harnesses
ICT Billet camshaft position sensor adapter harnesses are used when converting from rear-block sensor to front-cover sensor. They will, for example, adapt a Gen IV LS sensor to a Gen III harness. The harnesses are made with OEM-grade TXL wire and assembled with OEM tooling and OEM Delphi (connector, lock, seals, and terminals). Order the model recommended for your application.
( 3 )
$43.99
ACDelco Replacement Wiring Harness Connectors
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 22 )
$11.99
—
$46.99
Motorcraft Wiring Connectors
Dozens of sensors, lights, motors, and switches—nearly every accessory on your vehicle is powered through a wiring circuit. When any of those electrical components begin to fail, Motorcraft wiring connectors can help restore proper operation. For repairs or replacement on Ford, Lincoln, and Mercury vehicles, in particular, Motorcraft carries a full line of wiring pigtails and connectors for countless applications, using technologies that exactly replicate the OEM products. Depend on Motorcraft for precision electrical parts with the fit, form, and function you need!
( 8 )
$9.99
—
$246.99
Dorman Engine Cylinder Deactivation Solenoids
Certain multiple displacement solenoids (MDS) have plastic housings and low-grade O-rings that fail in extreme heat. Dorman engine cylinder deactivation solenoids upgrade the plastic housing to aluminum and add premium, compression-tested O-rings to prevent premature failures. They include a new gasket and mounting bolt for a complete repair. Dorman engine multiple displacement system solenoids are application specific—made to directly replace the original MDS on certain Chrysler, Dodge, and Jeep applications from 2005-09.
( 3 )
$54.99
—
$227.99
ICT Billet LS3 MAP Sensor Connector Component Kits
ICT Billet LS3 MAP sensor connector component kits are compatible with 2009-and newer GM LS Gen 4 Series engines - "Bosch" style sensors. They replace broken, worn-out, or missing harness connectors for the MAP sensor. Kits include connector, retainer, terminals, and seals. * Compatible with 3-wire Gen 4 LS3 "Bosch" style, bolt-down sensors * Not compatible with LS Gen 3 clip-in sensors or "Brick" style sensors
Not Yet Reviewed
$22.99
Z Automotive OBD2 Double Bypass Harnesses
2018+ Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners. Z Automotive double bypass kits overcome that obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module. The quick plug-and-play installation takes under 5 minutes—with no wire splicing or cutting. The double bypass harnesses will also work on 2011-17 Chargers/300s and 2015-17 Challengers, for those who want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
( 3 )
$55.00
