Availability
Showing In Stock Items. Show All 614 Items.
Summit Racing™ MDS solenoid plugs are designed to plug the hole where the old MDS solenoids used to live. Commonly used when swapping MDS engines into older non-MDS cars or retro fitting non-MDS cams.
( 4 )
$40.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1018 )
$38.99
—
$49.99
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$36.90
—
$41.22
Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions
( 95 )
$26.50
—
$48.99
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 62 )
$24.99
—
$25.99
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 289 )
$30.57
—
$33.62
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 80 )
$20.99
—
$47.99
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$20.99
—
$48.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$38.99
—
$47.99
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 106 )
$28.99
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 71 )
$23.99
—
$30.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$23.50
—
$49.99
Summit Racing™ MAP sensor adapters enable you to use a Holley LS2 harness with LS3 engines. These adapters feature pre-terminated connectors and wiring for a direct plug-and-play installation.
( 4 )
$28.99
Dorman knock sensor wiring harnesses play a dual role in helping to monitor and protect your engine. They're manufactured from quality materials to ensure years of trouble-free performance. These OEM replacements are available for nearly 2,000 applications from the '90s and up.
( 26 )
$28.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 108 )
$39.99
—
$44.99
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 379 )
$31.99
Keep your distributor from twisting at high rpm with CVR distributor hold-down brackets! These brackets are offered in a choice of anodized finishes and include a stainless mounting stud, nut, and washer. CVR distributor hold-down brackets feature a slotted bolt hole for easy distributor removal.
( 22 )
$32.99
—
$38.99
Top Street Performance LS ignition coil relocation harnesses plug directly into the stock engine harness or TSP's extension cables. They are designed for easier hook-up when the coils have been positioned more closely together. The pair of harnesses is for eight ignition coils, and along with TSP's 24 in. extension cable, relocation of coils is a piece of cake.
( 3 )
$49.38
ICT Billet MAP harness extensions are ideal for use on many Chevrolet LS-based engines from 1997 and up. They're made with OEM tooling, connectors, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAP harness extensions.
( 4 )
$43.99
When your engine refuses to turn over, it could be time for one of these Motorcraft replacement starter solenoids. Made to fit, they plug directly into the starter circuit and are designed to activate your motor, push the starter Bendix gear into the ring gear, and deliver quality performance. Motorcraft starter solenoids offer the best fit for your Ford, Mercury, and Lincoln vehicles.
( 40 )
$26.99
Dinan ignition coils are designed to be direct plug-and-play replacements, or upgrades, to factory coils and provide greater energy output. With up to 10 percent more energy output than stock, the coils ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark, your ignition system will be more efficient with a new set of Dinan coils. They are available in several styles. For those that like to showcase engine modifications, Dinan coils come in a variety of unique housing colors with the Dinan logo for the perfect personalized touch.
( 9 )
$32.75
—
$33.77
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 178 )
$31.99
—
$44.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 31 )
$20.99
—
$48.99
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 39 )
$20.99
—
$45.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
