Availability
Summit Bucks
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 107 )
$63.99
—
$67.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$77.99
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 21 )
$61.99
—
$77.95
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 39 )
$54.95
—
$129.95
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$114.05
$102.64
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1016 )
$55.99
—
$57.99
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 26 )
$59.99
—
$80.99
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 370 )
$54.99
—
$72.99
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 59 )
$59.25
Summit Bucks
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 20 )
$51.99
—
$58.99
Engine knock is one of the most unwelcome problems to plague a vehicle. When your ignition timing becomes faulty, the results are felt unless corrected through a sensor. Chevrolet Performance knock sensor wiring harnesses should be used when replacing those key sensors, providing fresh OEM wiring and grommets. The harness units are available for over a hundred submodels from makers such as Chevrolet, GMC, Cadillac, Pontiac, Buick, and Hummer.
( 33 )
$74.99
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$57.95
—
$106.95
Summit Bucks
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$65.99
—
$81.99
Dress up your engine compartment and organize your plug wires all in one fell swoop with these Billet Specialties billet wire looms. Their stout aluminum construction showcases a mirror-polished finish and either plain or various machined top designs. Their 2-piece design features adjustable tabs that attach to the base of the valve covers via their mounting bolts.
( 103 )
$99.99
—
$109.95
Dragon Fire Race Series spark plug wire sets feature the perfect combination of ultra-high heat resistance and reliable high-voltage delivery to outperform and outlive most other wires. Their multi-layer construction and industry-leading, spiral-wound conductors provide maximum voltage transfer, regardless of your coil type. Make strong spark delivery one less worry when building your ultimate performance project with a specialized set of Dragon Fire 3000 Race Series spark plug wires. Features and specs: * Extra-strong high-grade copper/stainless steel terminals * Superior EMI/RFI suppression technology * 500 ohm ultra-low resistance * Extra-thick-walled German-made silicon boots and jacket (600 degrees F-rated) * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * PentaCore alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is perfectly crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 26 )
$59.95
—
$104.95
If you're swapping an LS Series engine into your street rod, musclecar, or classic car, you're going to need one of these Chevrolet Performance LS engine reluctor wheels. They are designed to fit late model Generation III/IV Chevrolet LS Series engines. The reluctor wheels are available in different tooth counts to accommodate your specific year and engine combination.
( 7 )
$62.52
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$95.59
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 301 )
$102.90
—
$117.75
$92.61
—
$105.98
On Sale
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 444 )
$61.95
—
$68.40
$55.76
—
$61.56
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 16 )
$59.95
Summit Bucks
ACDelco GM Genuine Parts ignition coils are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. They increase electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery's charge, and provides power to the electrical accessories while the engine is running. GM Genuine Parts ignition coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed.
( 8 )
$58.99
—
$99.99
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
