Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1998 Ignition Components
Showing In Stock Items. Show All 36 Items.
On Sale
Summit Racing™ Blueprinted HEI Distributors
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1245 )
$112.99
—
$319.99
$101.69
—
$287.99
On Sale
Summit Racing™ Ignition Tune-Up Kit Pro Packs
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$556.48
—
$1,029.73
$533.98
—
$1,019.43
On Sale
Summit Racing™ Digital RTR Plus Billet Distributors
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 7 )
$349.99
$314.99
On Sale
Summit Racing™ Distributor Gears
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 81 )
$19.99
—
$77.99
$17.99
—
$70.19
On Sale
Summit Racing™ High-Output Ignition Coils
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 375 )
$37.99
—
$484.91
$34.19
—
$436.41
On Sale
Summit Racing™ Vortec Distributors
Replace your tired stock distributor with a brand new Summit Racing™ Vortec distributor and you'll get more power than you ever expected out of your ignition at a price that can't be beat. The distributors have heavy-duty features like a balanced rotor, aligned bronze oilite bushings for extended street use, and a cast aluminum housing that's machine-finished. They have a magnetic trigger for a consistent, powerful spark and a blue cap with brass terminals for excellent spark transfer. Each distributor is dynamically tested, so you can trust that you're getting a high-quality distributor.
( 162 )
$180.99
—
$214.99
$162.89
—
$193.49
On Sale
Summit Racing™ Ignition Kits
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$150.98
$135.88
On Sale
Summit Racing™ Distributor Cap and Rotor Kits
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 380 )
$31.99
—
$73.99
$28.79
—
$66.59
On Sale
Summit Racing™ Ready-to-Run Billet Distributors
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 29 )
$341.99
$307.79
On Sale
Summit Racing™ Bronze Distributor Gears
Make sure that you have the right distributor gear for your steel billet roller cam. Our bronze distributor gears from are made from high-quality aluminum bronze alloy and are precision-machined for smooth, reliable operation.
( 11 )
$40.99
$36.89
On Sale
Summit Racing™ LS Ignition Coil Wiring Harness Extensions
Summit Racing™ LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Order the harness length needed for your application.
( 1 )
$26.99
—
$71.99
$24.29
—
$64.79
On Sale
Summit Racing™ Ford Mod Motor Coil-On-Plug Ignition Coils
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 62 )
$18.99
—
$207.92
$17.09
—
$187.12
On Sale
Summit Racing™ Distributor Hold-Down Clamps
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 106 )
$8.99
—
$28.99
$8.09
—
$26.09
On Sale
Summit Racing™ Ignition Systems For Chevy V8
Upgrade your ignition to the power and performance of a Summit Racing™ system. Our ignition system combos for Chevy V8 feature a Summit Racing™ multi-spark digital capacitive discharge ignition box (with or without rev limiter), a Summit Racing™ billet distributor or blueprinted HEI distributor, and our 51,000 V, 260 milliamp ignition coil (the HEI kit does not include the external coil). The epoxy coil has E-core windings, stud terminals, and an extruded aluminum mount. It measures 3.228 in. tall x 4.553 in. long x 4.519 in. wide.
( 38 )
$451.97
$406.77
On Sale
Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$58.98
—
$112.98
$53.08
—
$101.68
On Sale
ACCEL Super Coils
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 806 )
$80.85
—
$495.95
$45.59
—
$279.55
On Sale
Summit Racing™ Remote Mount LS Ignition Coil Relocation Brackets
Relocate your coil pack to a more open or out of the way area of the engine bay with Summit Racing™ remote mount LS ignition coil relocation brackets. Our kits include bolts and spacers, along with robust powdercoated steel brackets to securely mount your coil packs with a clean, professional look.
Not Yet Reviewed
$43.99
—
$69.99
$39.59
—
$62.99
On Sale
MSD Multiple Spark Coils and Coil Kits
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$977.95
—
$1,078.95
$749.96
—
$751.13
On Sale
MSD Direct Replacement Ignition Coil Packs
When it comes to late model performance parts, nothing beats bolt-on and direct connection components--especially when they improve performance like these MSD direct replacement ignition coil packs. They are designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and improved midrange rpm power.
( 60 )
$57.85
—
$326.95
$32.61
—
$218.16
On Sale
ACCEL Mopar Remote Super Coils
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$60.64
On Sale
MSD Blaster OEM Replacement Coils
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 629 )
$511.95
$340.75
On Sale
Holley Sniper HyperSpark Ready to Run Small Cap Distributors
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$366.41
On Sale
Summit Racing™ LS Coil Brackets
Summit Racing™ LS coil brackets allow you to mount your coil packs in the OEM location on top of the valve covers. These brackets and made from high quality materials and finished to protect against harsh under-hood conditions like high heat and corrosion.
( 8 )
$41.99
—
$51.99
$37.79
—
$46.79
On Sale
ACCEL Mopar Remote Super Coil and Harness Combos
ACCEL Mopar Remote Super Coil and harness combos provide increased performance for Dodge trucks and Jeeps that utilize the light gray Yazaki coil connector. You get quicker starts, improved idle, crisp throttle response, and higher top-end power. These coil and harness combos are compatible with Mopar J-TEC computer-controlled ignitions, and require no modifications for installation.
( 31 )
$117.37
$90.25
