Availability
Showing In Stock Items. Show All 38 Items.
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 999 )
$125.15
—
$223.85
$109.49
—
$201.46
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$165.50
—
$315.95
$148.95
—
$261.14
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$286.95
$136.53
—
$258.26
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$144.25
—
$183.50
$126.66
—
$165.15
On Sale
Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.
( 26 )
$149.05
—
$160.20
$134.14
—
$144.18
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$280.10
$183.81
—
$252.09
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$190.95
—
$216.95
$171.86
—
$195.26
On Sale
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$199.95
—
$239.25
$179.96
—
$215.32
On Sale
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
$121.72
—
$200.97
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 462 )
$199.95
—
$210.95
$129.95
—
$158.95
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$179.30
$148.66
—
$161.37
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 301 )
$179.30
—
$201.05
$161.37
—
$180.94
On Sale
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$214.80
$193.32
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$299.95
$164.95
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.
( 50 )
$179.30
—
$214.80
$161.37
—
$193.32
On Sale
PerTronix alternators are designed for Volkswagens to allow the use of high-output sound systems, engine management systems, and off-road lighting, plus they are direct bolt-on replacements for air cooled Volkswagens. They are internally regulated for excellent output at idle and their internal fan helps to maximize cooling for improved component durability when used in extreme operating conditions. The alternators are available in natural or a show-quality polished finish. Order your application in your preference of finish.
( 2 )
$246.65
$221.98
On Sale
Shiftworks neutral safety and back-up switch relocation kits are cost-effective ways to upgrade your transmission, without having to buy a new shifter. These kits can eliminate linkage issues related to the OEM switch location on column. Each of these conversion kits come with the necessary components to upgrade your factory shifter to work with your new transmission, while keeping the original shifter appearance of your vehicle. In addition to these neutral safety and back-up light switch kits, Shiftworks also offers shifter assemblies, and other components that are available for purchase to update or repair your shifter.
( 10 )
$134.99
$121.49
On Sale
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$112.45
—
$179.30
$101.20
—
$161.37
On Sale
Compu-Fire replacement alternators feature quality construction and are a dependable solution to your charging problems. Available in a variety of amperages and styles, they allow you to choose the right one for your ride and the accessories you run. Compu-Fire alternators have the power you need to keep you going.
Not Yet Reviewed
$256.75
$231.08
On Sale
Compu-Fire ignition module kits are used by VW Baja racers. These ignition modules for Bosch distributors replace the contact breaker points. They deliver peak performance, proven durability, and an easy installation. Increase small car performance in a big way with Compu-Fire ignition module kits.
( 6 )
$120.40
$108.36
On Sale
Taylor Spiro-Pro Race-Fit Spiro-Wound core spark plug wire sets outperform the competition in both looks and performance at a price that you can afford. According to Taylor, Spiro-Pro is simply the best high performance 8mm wire you can buy and is a perfect choice for your race or street car. Their Spiro-Wound core is designed for use when RFI suppression is required for today's complex multiple spark discharge systems. Spiro-Pro features two layers of 100 percent silicone to withstand temperatures of up to 600 degrees F without the need for additional sleeving. Each wire is preterminated to a specific length—and features Taylor's all-silicone Pro Boots with double spring-locking spark plug terminals. They're available in a choice of colors. Order the set and options designed for your vehicle and engine application.
( 111 )
$179.30
$161.37
On Sale
Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.
( 1 )
$135.00
$121.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
