Availability
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 194 )
$196.99
—
$227.99
You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.
( 696 )
$137.99
Proform Mopar licensed high-torque starters spin your engine over faster than stock models. These high-output motors deliver 40 to 50 percent more cranking power, and they're made entirely from new—not rebuilt—components. They feature the retro-style Mopar logo and fit all Mopar V6, small block and big block engines applications from the 1950s thru early '90s. Proform Mopar licensed high-torque starters feature: • 4.41 to 1 sealed gear-reduction drive and full ball bearing construction • Gear reduction-type lightweight-style with natural finish • Cast aluminum mount • For 14.0:1 maximum compression ratio engines • 100 percent new component • Offset design for more oil pan clearance
( 36 )
$211.95
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 900 )
$238.99
—
$453.99
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$549.95
$357.95
—
$499.95
Upgrade your existing starter's performance with a new Powermaster Ultra Duty Diesel starter. These starters are stronger, faster, and tougher! They are able to turn over the most aggressive diesel engines in the harshest of environments. Featuring a 3.80:1 gear reduction, 260 ft. lbs. of torque and 3.6 horsepower these Powermaster Ultra Duty Diesel starters can handle anything.
( 245 )
$256.99
—
$306.99
Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.
( 539 )
$298.99
With their gear-reduction drives, heavy-duty PowerMaster Mastertorque starters really crank out the power--180 lb.-ft. of torque. So they can handle engines with compression ratios as high as 14.0:1. If your stock starter clears your oil pan, they will, too. Some will also clear kicked-out pans. A selection of Mastertorque starters can be mounted in multiple orientations, and some will work inverted with the solenoid down. They feature a black wrinkle finish and select models are available in a chrome plated finish.
( 617 )
$187.99
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 601 )
$215.99
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 238 )
$310.99
—
$322.99
Powermaster Ultra Torque high-speed starters deliver 25 percent more cranking rpm at the flywheel than the standard Ultra Torque starters. They are perfect for use in blown alcohol engines, or any engine requiring higher than normal cranking speed. The Powermaster Ultra Torque high-speed starters feature a 2.2 kW, 3.0 hp motor and have a machined aluminum adjustable mounting block. They will fit all oversized and kickout-style oil pans with no clearance problems.
( 29 )
$350.99
—
$412.99
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 117 )
$143.99
Summit Bucks
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 204 )
$72.99
—
$293.99
BluePrint engine starters feature billet aluminum mounting blocks and their "clockable" models can be rotated or turned for special clearance needs. BluePrint uses high-quality internals for long-life and durability. BluePrint engine starters are trusted by engine builders worldwide!
( 29 )
$129.95
Summit Bucks
ACDelco starter solenoids are a recommended replacement for your vehicle's original solenoid. They relay the electrical current to the starter motor to start your vehicle's engine. ACDelco starter solenoids have been manufactured to fit your vehicle and provide the same performance, durability, and service life you expect from ACDelco.
( 1 )
$25.99
—
$50.99
South Bend Clutch starter shims will help to properly mate your diesel's starter, flywheel, and transmission. These aluminum starter spacers include bolts and are available for NV4500 and Getrag transmissions. Engage your clutch; South Bend Clutch starter spacer/shims will make sure the ring gear makes contact with the starter.
( 2 )
$46.42
Tuff Stuff Performance gear reduction starters draw half the amperage of full size starters—for more spark to get you going at only a fraction of the size and weight. These smaller lightweight babies can crank out the power you desire and need for the street, strip, or track, while affording you valuable space for more header, chassis, and oil pan clearance. The gear reduction starters with multi-indexing mounting bases are available in triple chrome plated, natural, or black powdercoated finishes; they're assembled and finished in-house. Tuff Stuff Performance understands that you need more than a custom finish. Their diligent quality control ensures consistent, reliable high performance parts, so you know that their "chrome will get you home"! Dozens of models are available for both automatic and manual transmissions. Choose the style and starter designed for your vehicle application.
( 249 )
$172.99
—
$251.99
With 1.9 hp and a 4:1 gear reduction ratio, these CVR Protorque starters are sure to get your engine cranking. These starters feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. These CVR Protorque starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 160 )
$195.99
—
$247.99
Summit Bucks
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 53 )
$34.99
—
$345.99
TCI Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance. TCI Racing starters are built with full ball bearings for less friction and more torque and a heavy-duty contact disc solenoid for more consistent starts. Their efficient design draws less amperage, leaving more power for your ignition system.
( 9 )
$344.95
—
$442.95
Bosch remanufactured starter motors are built for extreme heat, cold, and high demand. Every engine starter component is 100 percent factory-tested prior to and during remanufacturing to assure it meets or exceeds OE specs. Additional notes on Bosch Professional Preferred remanufactured starters: * Each unit is remanufactured, not rebuilt * Includes the highest quality of materials and the most technologically advanced processes * Offers premium starting performance * All shaft splines and load-bearing surfaces are lubricated with OE high-temperature grade * Armature continuity is tested, gauged, straightened, and shimmed
( 13 )
$58.99
—
$256.99
Our full size high-torque starters give you 25 percent more torque than your OE starter. On the inside, we gave them specially wound copper field coils, heat-resistant solenoids, low-carbon brushes, and thick-barred armatures for fail-free performance under high-temperature conditions. The rotating assemblies spin on heat-treated shafts that ride in Bendix bearings for reliability and long life. These starters fit all Chevys with a 168-tooth ring gear and a staggered bolt pattern.
( 69 )
$235.99
CSR Platinum Pro series high-torque starters are designed for all-out competition use. They are recommended for all engines over 450 cu. in. and/or with compression ratios over 12.5:1, as well as all supercharged engines. Platinum Pro series starters have a powerful 2.4 hp motor that provides 40 percent more torque than CSR's 1.6 hp high-torque starters, and they're only one inch longer, to allow for maximum clearance.
( 4 )
$414.95
Meziere True Start 300 Series high-torque starters are recommended for all high-compression, large displacement engines up to 565 cu. in. and supercharged applications. They use an optimized planetary gear reduction to deliver maximum engine cranking speed—and supported nose to provide rigidity for reliable gear alignment. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 300 Series high-torque starters feature a custom Bendix to ensure excellent longevity. Order the model designed for your vehicle application.
( 5 )
$662.40
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
