Availability
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 701 )
$50.99
—
$117.99
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$22.25
—
$157.00
$20.02
—
$141.30
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$57.95
—
$106.95
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 39 )
$54.95
—
$129.95
On Sale
Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.
( 26 )
$148.50
—
$160.20
$133.65
—
$144.18
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$64.60
—
$79.55
$58.14
—
$71.60
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 33 )
$145.75
—
$199.95
$80.95
—
$149.95
Dragon Fire Sport Series spark plug wire sets are designed to provide unsurpassed performance, making them one of the best wires available. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your performance project with a specialized set of Dragon Fire 2000 Sport Series spark plug wires. Features and specs: * High-grade copper/stainless steel terminals * Full EMI/RFI suppression technology * 150 ohm low resistance * 600 degrees F-rated silicon * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * Spiral core alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 21 )
$60.95
—
$142.95
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$299.95
$164.95
—
$261.95
Summit Racing™ muscle car retro ignition wires offer an old-school look without sacrificing modern-day features. These 7mm wires have a low 300 ohm/ft. resistance and aramid inner core wrapped by a spiral-wound conductor for full spark delivery and excellent EMI suppression. A dielectric barrier prevents current leakage, and a braided fiberglass layer strengthens the wires, while maintaining flexibility. A crimp tool is included. The ignition wires are available with straight or angled spark plug boot ends and other options. Order the set designed for your classic 1960s or '70s application.
( 10 )
$53.99
—
$68.99
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$55.65
—
$145.85
$50.08
—
$131.26
On Sale
PerTronix MAGX2 Ceramic boot wires are designed to prevent burnt wires from the high temperatures generated by your performance engine. Each wire is constructed from two layers of ultra-high temperature silicone and rated up to 600 degrees F. The ceramic boots provide protection to direct heat up to 2,000 degrees F. Available in universal sets with straight, 45 or 90-degree boots, these kits include the distributor boots and terminals for both male and female style distributor caps. Additional notes: * Two paths for the current: Features a spiral wound stainless steel alloy wrapped around a carbon impregnated fiberglass center core * Low 500 ohm per foot resistance
( 4 )
$145.85
$131.26
Dragon Fire Race Series spark plug wire sets feature the perfect combination of ultra-high heat resistance and reliable high-voltage delivery to outperform and outlive most other wires. Their multi-layer construction and industry-leading, spiral-wound conductors provide maximum voltage transfer, regardless of your coil type. Make strong spark delivery one less worry when building your ultimate performance project with a specialized set of Dragon Fire 3000 Race Series spark plug wires. Features and specs: * Extra-strong high-grade copper/stainless steel terminals * Superior EMI/RFI suppression technology * 500 ohm ultra-low resistance * Extra-thick-walled German-made silicon boots and jacket (600 degrees F-rated) * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * PentaCore alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is perfectly crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 26 )
$59.95
—
$162.95
With a rating of 25 ohms per foot, FAST FireWire spark plug wires are a whopping 37 percent more efficient than the nearest competitor. These premium-grade, double-layer, silicone-insulated wires offer unsurpassed resistance to heat and damaging fluids and enhanced protection against high-voltage breakdown. They are also ideal for street use, as their KEVLAR®-reinforced "reactive core" design filters out RFI and EMI noise that affects sound systems. Additional features include: * Unique reactive-core engineered to deliver maximum spark-gap energy to your spark plugs with today's high-output competition ignitions * Filter out RFI and EMI (RFI/EMI pulsings confuse onboard engine control computers, audio systems, and other electronic devices) * Very low 25 ohm resistance ensures maximum spark-gap energy is delivered to the spark plugs * Complete, assembled, and ready to install!
( 12 )
$47.95
—
$214.95
On Sale
You'll get the most from your motorcycle with ACCEL SuperStock spark plug wire sets. These SuperStock wires from ACCEL have some of the same great features as the 300+ Series--a thick 8mm silicon jacket and insulation to eliminate electrical leakage and ultra-strong Aramid and fiberglass braiding to resist vibration and "wire stretch"--making for a very durable, reliable set of wires. The SuperStocks also offer a low 500 ohms/ft. resistance core that delivers maximum spark--up to five times more peak energy than the competitors, even under extreme temperatures. For great performance from your cycle, go with the winning technology of ACCEL.
( 1 )
$65.85
$35.34
—
$65.85
Our Summit Racing™ 8.5mm ignition wire rolls allow you to custom-make spark plug wire sets or will come in handy when you're building multiple wire sets. The 8.5mm bulk wire features a spiral-wound copper conductor with extremely low resistance (just 40-50 ohms/ft.), combined with excellent EMI suppression. The wire also features a high dielectric strength insulator and heavy glass braid, topped with a heavy-duty black silicone jacket to resist heat and abrasion.
( 6 )
$49.99
OER offers spark plug wire retainers in several styles for countless applications from the 1950s and up. These reproduction wire retainers are designed to exact OE specifications to provide a perfect fit and finish every time. Unsecured spark plug wires not only look bad, they can easily be damaged by exhaust manifolds or headers—leading to performance problems and unnecessary repairs. Order a new set of OER spark plug wire retainers and give your engine bay a fresh new look at low cost.
( 7 )
$8.99
—
$15.99
Our Summit Racing™ coil wires feature spiral-wound copper conductors for low resistance, a high dielectric strength insulator, and heavy glass braid topped with black silicone jackets and boots. The 8.5mm coil wires feature installed male/HEI terminals and boots.
( 2 )
$13.99
Stromberg E-Fire High Performance spark plug wires are designed for flathead Ford applications—whether you have a front mount (59A) or top mount (8BA) distributor. Designed to work with both electronic and points-style distributors, E-FIRE plug wires give you strong fire power with high-level RFI/EMI resistance. The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100 percent silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs. With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.
( 3 )
$65.00
Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets offer performance and value to replace your OEM wires. They feature high-quality leads that deliver 500 ohms of EMI-RFI noise suppression with low resistance. Ultra-Spark 500 wires are built with superior cores—wrapped with a suppression material, conductive winding, and a layer of latex silicone. That is covered with inner insulation, braid tape, and an 8.5mm silicone outer jacket that won't crack or shrink, and resists chemicals. Why replace when you can upgrade? Treat your daily driver or budget build to Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets.
( 6 )
$61.95
—
$62.95
Auto Metal Direct offers spark plug wire retainers for a variety of applications. These reproduction wire separators are designed to exact OE specifications to provide a perfect fit and finish. Unsecured spark plug wires not only look unkempt, they can easily be damaged by exhaust manifolds or headers—leading to performance problems and unnecessary repairs. Order the set recommended for your vehicle, and give your engine bay a fresh look at low cost.
( 3 )
$32.99
Our Summit Racing™ 8mm ignition wire rolls allow you to custom-make spark plug wire sets or will come in handy when you're building multiple wire sets. The 8mm bulk wire features a spiral-wound conductor with low resistance (270 ohms/ft.) and high-temperature silicone outer jackets and insulation, along with a fiberglass braid for more pull strength.
( 3 )
$40.99
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 16 )
$59.95
On Sale
Taylor's Pro Wire 8mm TCW core spark plug wire sets beat the competition, both in looks and performance. They're 100 percent pure silicone insulated with a fiberglass reinforced jacket. The TCW core conductor is designed for racing applications where RFI is not a concern and is an excellent choice for Magneto, point type, and non-electronic ignition applications. Available in four colors, these wires feature Taylor's exclusive low profile, 100 percent silicone Pro Boot with finger grips and vibration proof spring lock terminals, and are designed to withstand over 600 degrees F when underhood temperatures are high.
Not Yet Reviewed
$20.00
—
$105.00
$18.00
—
$94.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
