Availability
Showing In Stock Items. Show All 100 Items.
To take advantage of the programmable Digital-7's Individual Cylinder Management system, a synchronization pickup must be incorporated so the ignition knows exactly which cylinder is firing. With this information, the MSD can begin your unique timing sequence through each cylinder! MSD offers two ways to accomplish this: Spark plug wire sync kits and cam sync pickups.
( 3 )
$178.95
In case you damage or misplace the fiber optic cable to your MSD spark plug wire sync kits, MSD offers this 12 ft. long optic cable as a quality replacement. These fiber optic cables are engineered to emit a clear signal to the power grid for individual cylinder timing, and are supplied with a yellow protective sleeve.
Not Yet Reviewed
$19.13
Taylor V8 vertical wire loom kits allow ignition wires to be run vertically along your valve cover and away from your exhaust manifold or header heat. These kits fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six vertical brackets
( 63 )
$39.25
—
$50.90
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$14.42
—
$274.95
Taylor offers these 8mm silicone spark plug boot and terminal kits for custom installs and repairs. They feature vibration-proof, spring-lock spark plug terminals, along with high-temperature boots.
( 123 )
$12.90
—
$33.60
Taylor coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end, as well as for the coil attachment.
( 93 )
$14.10
—
$24.90
Moroso Ultra 40 spark plug boot and terminal kits are manufactured from high-temperature silicone. They are available in straight, 90 degree, and 135 degree ends.
( 11 )
$27.99
—
$40.99
Dragon Fire boot and terminal LS conversion kits convert your non-LS distributor boot ends into LS coil packs. The components include 7mm to 8.5mm wires with brass terminals, stainless steel snap-locks, and extra-thick boots.
( 3 )
$29.95
Moroso Ultra 40 coil wire kits are available sleeved and unsleeved. The kits allow installation of an ignition coil in a remote location or they can be used as replacement wire in a wire set. They feature Moroso Ultra 40 high performance ignition race wire that maximizes energy transfer and minimizes EMI and RFI interference noise. It is available in blue or black. The unsleeved kits contain 72 in. wire, and the sleeved kits contains 48 in. wire with 48 in. high-temperature sleeving. Sleeving adds extra dielectric strength, extends spark plug wire life, and protects against exhaust heat, chaffing and contaminants. All Moroso Ultra 40 coil wire kits include: * 2 HEI 90-degree distributor boots * 2 HEI 90-degree spark plug boots * 4 HEI terminals * 2 Non-HEI 90-degree boots * 4 Non-HEI terminals * 2 coil boots
( 12 )
$32.99
—
$54.99
Designed exclusively for extreme-duty racing conditions, it's hard not to like all of the features in MSD's new Professional Racing Series spark plug wire boot and terminal kits. The boots feature a proprietary blend of materials to withstand much higher temperatures over a longer period of time than standard boots.
( 42 )
$39.50
—
$46.09
On Sale
Replace your worn-out or damaged boots with ACCEL boot and terminal kits. The premium-grade, silicone spark plug boots provide superior connection protection from dielectric leakage, moisture, dirt, and other chemical contaminants. High dielectric strength EPDM or premium-grade silicone distributor/coil boots provide excellent resistance to flashover and crossfire and protect the distributor cap and coil tower connections. Stainless steel spark plug terminals feature positive-locking snap clips to ensure long life, performance, excellent corrosion resistance, and a positive connection. Spring-loaded brass or stainless steel distributor terminals provide maximum electric conductivity and corrosion resistance.
( 2 )
$25.66
$19.25
Direct from Moroso are these 4-hole spark plug wire loom kits. These triple-process chrome plated brackets with high-temperature plastic separators keep plug wires away from exhaust manifolds, headers, and other trouble spots. They help prevent ignition crossfire by keeping wires evenly spaced, and are available in a variety of colors and wire diameter sizes.
( 16 )
$15.99
On Sale
Keep your wires separated with Mr. Gasket wire looms and divider kits. Available in a variety of styles, materials, and finishes, these wire dividers fit 7 and 8mm wires with ease. Whether you're at the strip, cruising the streets, or sitting at a car show, Mr. Gasket wire looms and divider kits will be sure to keep your wires away from your headers and the engine compartment looking clean.
( 38 )
$43.00
$9.32
—
$83.05
ACCEL ceramic single wire replacement kits make a great replacement for the one wire that got cut, burned, or broken. Each kit includes a 60 in. long, 8mm Extreme 9000 ceramic wire with a ceramic boot preinstalled, 90 degree boots, and terminals for points and HEI caps. Select the spark plug boot end style needed for your application.
( 37 )
$39.47
—
$46.07
Spectre Performance wire separator kits are an affordable way to organize your ignition wires. These wire separator kits separate your wires and keep them away from other engine components to prevent possible crossfire and damage. They're offered in a choice of sizes and materials to meet your needs.
( 12 )
$3.99
—
$8.99
Labeling plug wires is fast and easy when you use DEI spark plug wire marker kits. The sleeves are made from high-temperature Mil Spec black heat shrink, and are tough enough to handle extreme underhood temperatures. The high shrink ratio of 3:1 allows the markers to slide over plug boot ends and still shrink tightly to the wires. DEI spark plug wire marker kits are numbered 1 through 8 in a high-visibility white ink that is oil and chemical resistant.
( 22 )
$13.99
On Sale
Designed for competition and street use, Mr. Gasket's competition wire separator kits are the way to go. They help minimize crossfiring by keeping the ignition wires sufficiently separated from each other. Made from a heat-resistant plastic with or without the Mr. Gasket logo, these wire separators will accommodate 7 and 8mm ignition wires. They come available in a variety of colors and include two 2-wire, 3-wire, and 4-wire separators.
( 8 )
$10.03
$6.52
—
$10.03
These spark plug and coil wire repair kits from Taylor are easy replacements for damaged individual wires. They're available for an assortment of wire types in a variety of colors and sizes to suit your application.
( 22 )
$19.61
—
$35.85
On Sale
These custom wire loom kits from Mr. Gasket were designed to eliminate crossfiring and prevent heat damage to ignition wires, while giving them a neat and custom look. Made from heat-resistant black plastic, the wire divider clips to a chrome plated steel bracket. This can be attached to the valve cover, while the wire separator is placed into the ignition wires, keeping them equally spaced. These kits will accommodate 7 to 8mm ignition wires, and include two 4-hole wire separators, eight 2-hole wire dividers, and four chrome plated steel brackets.
( 2 )
$25.95
$14.27
Moroso clamp-style wire separator kits will fit up to 8.65mm non-sleeved ignition wire. The looms are constructed of plastic and feature a split design with center retaining hardware. Moroso kits include an Allen wrench to loosen or tighten the center hardware, and come with two each 2, 3, and 4-hole separators.
( 3 )
$20.99
Moroso coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end as well as for the coil attachment.
( 5 )
$28.99
—
$40.99
Moroso Blue Max distributor boot kits are manufactured from high dielectric strength EPDM to provide excellent insulation. They are available for socket-style or male/HEI-style distributor caps. The socket-style boots feature brass terminals to provide maximum corrosion resistance, while providing high conductivity. The male/HEI boots use a positive locking terminal that won't fall off under high vibration or racing conditions.
( 2 )
$28.99
These distributor and coil boot and terminal kits from Taylor are perfect for engine builders or for people doing repairs and maintenance. Kits are available with boots only, terminals only, and are also offered with both boots and terminals. Taylor makes it simple and convenient to get just what you need for your service, repair, or custom setup!
( 117 )
$5.40
—
$33.60
These Taylor V8 horizontal wire loom kits allow ignition wires to be run horizontally along your valve cover and away from your exhaust manifold or header heat. They fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six horizontal brackets
( 31 )
$49.10
—
$50.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
