Availability
FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.
( 4 )
$551.95
—
$734.95
Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output
Not Yet Reviewed
$639.98
Haltech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
—
$750.00
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.
Not Yet Reviewed
$506.99
—
$658.99
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$699.00
One of the best creature comforts ever invented for drivers is cruise control. Standard Motor Products offers a full line of replacement cruise control distance sensors for fitment on a variety of vehicles. These precisely engineered sensors undergo rigorous testing to meet or exceed OE specs. Standard Motor cruise control distance sensors make long drives comfortable and safe.
Not Yet Reviewed
$502.99
—
$807.99
Haltech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$550.00
Haltech Pro Tuner Knock Ears dual-channel kits can help detect engine knocking in high performance and race vehicles. Features and contents: * Two 2-wire knock sensors with AMP-style connector * Single 3-wire knock sensor lead with shield for connection to 1 knock sensor * Dual 3-wire knock sensor leads with shield for connection to 2 knock sensors * Dual sensor sensitivity adjustment for fine tuning of the knock sensors * Cigarette power supply lead * Battery power supply lead with alligator clips for attachment to battery * Spares kit, assorted terminals for loom repairs * Plastic case with laser engraving * Stereo listening through professional industrial quality headset -- Dual volume control on headset -- Foam ear pads -- Passive noise cancelling * 3-core shielded cable -- Molex connector -- Two power supplies * 5-year warranty on Knock unit * 1-year conditional warranty on all other components
Not Yet Reviewed
$745.00
Tune your carburetor or fuel injection system with Daytona Twin Tec WEGO III wide-band exhaust gas oxygen sensor systems. These stand alone units have built in data logging so you can analyze the data logged and make the corrected changes. Daytona Twin Tec WEGO III wide-band exhaust gas oxygen sensor systems will log over 2 hours of data including AFR, and engine RPM. They are available in a single channel or dual channel unit. Other features: * Includes WEGO III unit, Bosch LSU4.2 wide-band oxygen sensor (2 for dual channel), 18x1.5mm weld nut (2 for dual channel), and software on CDROM. * Unit can be programmed to display Lambda or correct AFR values for any hydrocarbon fuel with a known stoichiometric ratio * Suitable for motorcycle, automotive, and other small engines * Measurement range is 10.3 to 19.5 gasoline AFR or 0.70 to 1.33 Lambda * Bright daylight readable blue LED display with automatic dimming * Built in USB interface * Fully encapsulated with water proof LED display
Not Yet Reviewed
$614.95
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$565.99
—
$652.99
Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.
( 6 )
$500.65
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals
Not Yet Reviewed
$659.95
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$544.99
—
$547.99
On Sale
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$765.99
$500.99
—
$749.99
Standard Motor blind spot detection sensors are direct-fit OE replacements to ensure proper fit and function. They monitor the sides of your vehicle to notify the driver of unseen obstacles—helping you to avoid accidents, minor rear-end collisions, and inaccurate parking, as well as making safer lane changes on the highway. These blind spot detectors have a plug-and-play design for easy installation. Order the model recommended for your vehicle application.
( 1 )
$501.99
—
$795.99
Standard Motor nitrogen oxide sensors are designed to detect NOx levels in diesel-fueled vehicles that must comply with state emissions regulations. These NOx sensors are direct-fit OE replacements for the originals, ensuring proper fit, form, and function, as well as ease of installation. The high-temperature sensors have a plug-and-play design, so no additional programming is required. Order the model recommended for your application.
( 1 )
$512.99
—
$633.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 37 )
$535.99
—
$719.99
Standard Motor Products steering wheel position sensors are direct-fit OE replacements that ensure ease of installation. These sensors are made of high-quality materials to withstand extreme conditions and they undergo extensive testing to ensure reliability.
Not Yet Reviewed
$529.99
Standard Motor EGR pressure feedback sensors are designed to be OE replacements for your factory EGR pressure feedback sensors. All Standard Motor products meet or exceed OE specifications. Keep your engine's performance up to par with these Standard Motor EGR pressure feedback sensors.
Not Yet Reviewed
$552.99
Standard Motor YAW sensors are genuine replacements, with the fit of an OE part. As a global manufacturer of automotive aftermarket products, SMP maintains complete quality control throughout the entire manufacturing process—from the components' inline production to the finished product, as well as extensive testing to ensure reliability. If you need to replace a suspension YAW sensor, choose the Standard Motor model recommended for your vehicle.
Not Yet Reviewed
$570.99
—
$689.99
KW EDC delete units eliminate persistent trouble codes that exist when upgrading the suspension on your vehicle with electronically regulated dampers. With these electronic damping cancellation kits, the functioning of the control unit remains completely intact. They're available for several applications, including a variety of Corvette models. The solution whereby the serial damper regulation is shut down—while avoiding trouble codes—is a KW EDC delete unit.
Not Yet Reviewed
$583.95
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$515.99
—
$787.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
