Availability
Showing In Stock Items. Show All 33 Items.
FAST fluid temperature sensor and converter kits provide an easy and economical way to measure fluid temperature and convert to a universal 0 to 5 V output, perfect for use with EFI systems and dataloggers. Designed around the widely available GM-style intake fluid temperature sensors, these FAST kits are ideal when trying to measure engine oil, coolant, transmission, intercooler/heat exchanger fluids, and rear differential temperatures. FAST fluid temperature sensor and converter kits come complete with fluid temperature sensor and pre-terminated sensor module, and installation is simple, with only three wires to connect.
Not Yet Reviewed
$87.95
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 20 )
$61.99
—
$77.95
These AEM Electronics coolant temperature sensor kits allow you to monitor the temperature of your coolant. They include an aluminum weld-in bung, a connector plug with a flying lead, and a sensor.
( 6 )
$54.45
—
$70.79
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
So, you wish you had surge control with your Accusump pre-oiling electric valve? Now you can with Canton Racing Accusump EPC conversion kits. These EPC conversion kits allow you the convenience of an electric valve with the rapid refill rate of the manual valve needed for racing. The electric pressure control valves permit automatic charge and discharge as needed to maintain oil pressure during cornering, acceleration, and braking. Prelubing your engine components is important and so is being ready for that next oil surge to keep you in the race.
Not Yet Reviewed
$98.00
If you're running an electric choke Holley carburetor and are having trouble figuring out how to get that electronic overdrive transmission to work, Holley has the perfect solution for you. Holley TPS kits are designed for use on an electric choke-equipped Holley carburetor and are perfect for use with an electronic overdrive transmission, such as a 4L60E or 4L80E. They can also be used for data acquisition. These TPS kits are also designed to supply the needed TPS signal to an electronic transmission while retaining a carburetor. They drive directly off of the primary throttle shaft for accurate voltage readings. Holley TPS kits come complete with all the parts needed for a safe and easy installation.
( 36 )
$82.45
Caspers Electronics heated oxygen sensor retrofit kits allow a new-style heated oxygen sensor to be installed on a vehicle that originally came with a non-heated, one-wire sensor. Heated sensors are more active and responsive than non-heated sensors and are also more resistant to contaminants such as lead. The kits feature a simple 2-wire installation and come complete with a 4-wire heated oxygen sensor and adapter harness.
( 17 )
$84.99
APR boost tap adapter kits are modular systems that plug directly into the intake manifold and make several configuration options available. APR modular boost tap and PCV bypass systems feature a tap used for referencing boost or vacuum from the manifold, a cap (if this feature is unneeded), a T-junction to allow for multiple boost and vacuum references, and a "no buzz" restrictor pill for proper manual boost gauge operation. The systems also include a threaded PCV plug, allowing the PCV system to operate as intended by the OEM, as well as blocked off, if needed, for a specific PCV or catch-can setup. Temporarily installing the threaded plug also allows for quick diagnosis of the PCV valve for boost leaks. APR's innovative and modular design ensures operation with all boost, vacuum, and PCV system combinations, leaving no compatibility worries for future configurations. Key features: * Provides manifold pressure and vacuum * Supports multiple connections * Blocks off front PCV is so desired * Includes all accessories * Plug-and-play install
Not Yet Reviewed
$79.95
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
—
$87.15
Aeromotive VaporWorx fuel pressure sensor datalogging kits are designed to monitor and record the fuel pressure in a vehicle's fuel system, allowing users to precisely analyze and adjust fuel pump speed based on real-time pressure readings, ensuring optimal fuel delivery and performance, particularly in high-performance applications where fuel demand can fluctuate significantly. Essentially, these kits provide valuable data to fine-tune a fuel system for efficiency and power delivery by monitoring pressure changes under various driving conditions. Key points about VaporWorx fuel pressure sensor datalogging kits: * Perfect for datalogging systems or as a replacement kit for your VaporWorx PWM kit (sold separately) * Precise fuel pressure monitoring—the kit includes a dedicated fuel pressure sensor that accurately measures the pressure in the fuel rail, providing detailed data for analysis * Pump speed adjustment—by reading the fuel pressure data, the VaporWorx controller can dynamically adjust the fuel pump speed to maintain the desired fuel pressure at all times, optimizing fuel delivery based on engine demands * Datalogging capability—the system allows users to record fuel pressure data over time, enabling them to identify potential issues like pressure drops during acceleration or inconsistencies under different driving conditions * Performance enhancement—by precisely regulating fuel pressure, users can optimize engine performance, improve throttle response, and potentially increase horsepower * Troubleshooting Tool—datalogging data can assist in diagnosing problems related to fuel pressure regulation, such as a failing fuel pump or a faulty fuel pressure regulator Note: Some applications, depending on where the sensor is mounted, may require a 10-20uf capacitor to be installed across the output and ground. The 5-volt supply not included.
Not Yet Reviewed
$79.55
Don't let a winch installation rob you of your vehicle's camera functionality. Rough Country front camera relocation brackets move your camera from the grille to the winch fairlead, ensuring clear visibility during all your adventures, plus a bonus. Crafted from robust 11-gauge material and custom-bent to perfectly fit RC's high-mount kit with safari bar, they are built to last. The camera clamp bracket, made from durable 14-gauge material, adds extra strength. With a sleek, flat black powdercoat finish, they not only perform but look great too. And here's the bonus--you can keep an eye on your winch cable entering the winch drum. Style and added functionality—Rough Country front camera relocation brackets.
Not Yet Reviewed
$69.95
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 13 )
$59.88
—
$92.68
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$89.99
Artec Industries ABS reluctor rings provide your on-board computer with correct data from the anti-lock braking system, eliminating codes and limp mode issues. These tone rings are made from quality steel and available in a range of tooth sizes to fit a variety of models. They're built specially for the axle swap applications on your Jeep JK.
Not Yet Reviewed
$50.59
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$99.87
Knock, knock... who's there? If it's your engine talking, you'd better listen! Beck/Arnley knock sensors are quality-made replacement parts that fit just like the originals. If you hear an unusual pinging in your car, especially at high speeds, then you may need to replace your knock sensor. Engine knock isn't a joke! Protect your engine and its components with replacement knock sensors from Beck/Arnley.
( 1 )
$105.99
FuelTech specializes in developing and manufacturing state of the art performance engine management systems, including their fuel pressure sensors. These replacement sensors are used to monitor fuel, oil, and wastegate pressure, as well as nitrous bottle and brake pressure (application dependent). Available options include black composite or stainless steel body construction and with or without a mating plug kit. FuelTech fuel pressure sensors are also available in several psi ratings, so choose the version best suited for your vehicle's style and application.
Not Yet Reviewed
$99.00
Griffin Radiator coolant temperature sensors are the replacements needed for your Griffin fan wiring kit. Don't take a chance of potential overheating; replace your aging sensor with the perfect fit of Griffin Radiator coolant temperature sensors.
( 4 )
$52.00
Wiring Specialties oxygen sensor extension harnesses make it simple to lengthen your O2 sensor wiring harness. Modifications like long tube headers or turbo kit upgrades could mean your O2 harness will be too short. Wiring Specialties has a safe, reliable solution with these easy-to-install extensions. High temperature adhesive tubing seals connections against moisture and heat. Wiring Specialties uses Hilec fireproof fiberglass sleeve to protect against high heat applications. Choose the plug style needed for your vehicle application.
( 17 )
$65.00
Aeromotive VaporWorx fuel pressure sensors are exclusively for use with all VaporWorx PWM (Pulse Width Modification) kits that require a fuel pressure sensor. Efficient energy management is one of the main goals in the automotive industry, regulating actuators by (PWM), which is a widespread means of improving efficiency. PWM fuel pressure sensors are used to precisely control the speed of a fuel pump by rapidly turning the power on and off in varying durations, allowing the engine to receive the exact amount of fuel needed based on driving conditions. This ultimately improves fuel efficiency and reduces unnecessary wear on the pump by only running it at full power when required; essentially acting like a "throttle" for the fuel pump. Select the sensor for your application. Key points of PWM fuel pressure sensors: * Dynamic fuel pressure control—unlike traditional systems, PWM allows the fuel pressure to adjust rapidly depending on engine load, throttle position, and other factors, ensuring optimal fuel delivery at all times * Reduced power consumption—by only running the fuel pump at the necessary speed, PWM significantly reduces the power draw from the battery, improving fuel economy * Lower noise levels—operating the fuel pump at variable speeds with PWM helps minimize noise generated by the pump * Returnless fuel systems—PWM is often used in modern "returnless" fuel systems, where the excess fuel is not returned to the tank, simplifying fuel system design How it works: -- Signal from the ECU: The engine control unit (ECU) sends a PWM signal to the fuel pump controller, which determines the duty cycle (the ratio of "on" time to "off" time) based on engine conditions -- Pump speed control: The controller uses the PWM signal to rapidly switch the power to the fuel pump, effectively adjusting its speed -- Feedback loop: A fuel pressure sensor monitors the actual fuel pressure and sends this information back to the ECU, allowing for fine-tuning of the PWM signal to maintain desired pressure
Not Yet Reviewed
$68.95
Dorman exhaust gas temperature sensors make replacing seized or damaged sensors a breeze. These EGT sensors are direct replacements and come with a bung repair kit just in case the bung is damaged during removal. This is a cost effective fix, instead of having to replace the entire exhaust pipe. They feature quality engineering and are backed by decades of automotive experience.
Not Yet Reviewed
$58.99
—
$104.99
The knock sensor is able to detect mechanical stress and produces a voltage when the car knocks or pings. Under heavy acceleration, it sends signals to the ECU and the ECU retards the ignition timing to compensate for the knocking, which in effect protects the pistons and rings from damage. Knocking also occurs when using low-grade fuel and having the knock sensor allows you to use different grade fuels without causing engine damage. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts knock sensors line has superior coverage for domestic and import applications.
( 3 )
$62.99
On Sale
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$62.99
Does some custom exhaust work require you to relocate your oxygen sensors? Then Kooks Headers oxygen sensor harnesses are just for you. They're available in several different lengths and for various applications. These harnesses are also assembled from high-quality components to meet or exceed OEM specifications. For an easy, hassle-free installation on your next exhaust project, choose Kooks oxygen sensor harnesses.
( 7 )
$108.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
