Availability
Showing In Stock Items. Show All 30 Items.
Dorman exhaust backpressure sensors accurately and reliably read your vehicle's exhaust pressure, enabling the PCM to control the amount of turbo boost. These direct replacements are quality-tested and engineered for lasting durability and increased performance. Dorman exhaust backpressure sensors deliver an OE fit, form, and function, with an easy plug-and-play installation.
( 1 )
$53.99
—
$74.99
Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter allow the cam sensor used on the front of an LS2/3/4/7/9 engine to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. They are ideal for LS2/3/4/7/9 motor conversions and are compatible with the PCM harness in LS1/LS6 vehicles. Additionally, they include a knock sensor extension, which allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2-series block, using the factory LS1 engine harness. The Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter have the correct length and thermal protection required when routing near hot engine components.
( 5 )
$55.99
Dorman has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. Dorman takes pride in having produced high-quality OE replacement parts with state-of-the-art equipment since 1918. Take advantage of having access to an industry-leading brand originally intended only for dealers. Dorman vehicle speed sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the sensor that'll get you back up to speed!
( 7 )
$50.99
—
$101.95
URO Parts accelerator pedal sensors have a direct-fit OE replacement design to restore accelerator pedal sensor function in your vehicle. And with easy plug-and-play connection and guaranteed fit, your install will be hassle-free. URO Parts accelerator pedal sensors feature alloy conductors to minimize electrical resistance for accurate operation, and they are designed and tested for reliability and long life. These URO sensors are backed by a 24-month Unlimited Mileage Warranty.
Not Yet Reviewed
$91.99
ACDelco Gold remanufactured mass airflow sensors are high-quality replacements for many vehicles on the road today. A key part of the engine management system, MAF sensors measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. Remanufacturing the mass air flow sensor is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end-of-line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. Order the sensor recommended for your vehicle.
( 1 )
$62.99
Dorman steering wheel position sensors are designed to provide feedback back to the speed-sensitive steering system. They are made from quality materials and include the factory harness for a direct fit installation.
( 1 )
$88.95
Aeromotive VaporWorx fuel pressure sensors are exclusively for use with all VaporWorx PWM (Pulse Width Modification) kits that require a fuel pressure sensor. Efficient energy management is one of the main goals in the automotive industry, regulating actuators by (PWM), which is a widespread means of improving efficiency. PWM fuel pressure sensors are used to precisely control the speed of a fuel pump by rapidly turning the power on and off in varying durations, allowing the engine to receive the exact amount of fuel needed based on driving conditions. This ultimately improves fuel efficiency and reduces unnecessary wear on the pump by only running it at full power when required; essentially acting like a "throttle" for the fuel pump. Select the sensor for your application. Key points of PWM fuel pressure sensors: * Dynamic fuel pressure control—unlike traditional systems, PWM allows the fuel pressure to adjust rapidly depending on engine load, throttle position, and other factors, ensuring optimal fuel delivery at all times * Reduced power consumption—by only running the fuel pump at the necessary speed, PWM significantly reduces the power draw from the battery, improving fuel economy * Lower noise levels—operating the fuel pump at variable speeds with PWM helps minimize noise generated by the pump * Returnless fuel systems—PWM is often used in modern "returnless" fuel systems, where the excess fuel is not returned to the tank, simplifying fuel system design How it works: -- Signal from the ECU: The engine control unit (ECU) sends a PWM signal to the fuel pump controller, which determines the duty cycle (the ratio of "on" time to "off" time) based on engine conditions -- Pump speed control: The controller uses the PWM signal to rapidly switch the power to the fuel pump, effectively adjusting its speed -- Feedback loop: A fuel pressure sensor monitors the actual fuel pressure and sends this information back to the ECU, allowing for fine-tuning of the PWM signal to maintain desired pressure
Not Yet Reviewed
$68.95
Your vehicle's engine camshaft position sensor reports the precise location of the camshaft to the Powertrain Control Module (PCM) to determine engine mechanical operation. NTK camshaft position sensors are manufactured to operational performance standards to meet or exceed OE fit, form, and function, ensuring proper camshaft position and verification of relationship between the pistons and valves. They undergo extreme testing conditions that include thermal shock, vibration, and OBD verification. They feature sealed connections to prevent leaks, environmental corrosion, and performance issues. O-rings and seals are included where applicable, and they are backed by a 3 year/36,000-mile warranty. Select the NTK camshaft position sensor needed for your vehicle
Not Yet Reviewed
$51.99
Dorman exhaust gas temperature sensors make replacing seized or damaged sensors a breeze. These EGT sensors are direct replacements and come with a bung repair kit just in case the bung is damaged during removal. This is a cost effective fix, instead of having to replace the entire exhaust pipe. They feature quality engineering and are backed by decades of automotive experience.
Not Yet Reviewed
$58.99
—
$104.99
OMIX-ADA proudly offers high-quality replacement air charge temperature sensors that always meet or exceed manufacturer's specs for quality you can trust. Get back on the road and enjoy your ride with OMIX-ADA.
( 1 )
$62.99
Has your Jeep' s check engine light come on? Does the scanner tell you that you need a new camshaft position sensor? OMIX-ADA camshaft position sensors are high-quality replacements for your specific Jeep engine. Get back on the road and enjoy the ride with OMIX-ADA.
Not Yet Reviewed
$52.99
Clearance
ACDelco offers replacement headlamp leveling sensors for a variety of Chevrolet, Buick, GMC, and Cadillac applications. GM Genuine Parts sensors are designed, engineered, and tested to rigorous standards—all backed by General Motors. These sensors help determine if your vehicle is tilted forward or back, and then adjust your vehicle's headlamp beam accordingly for added visibility. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your vehicle.
Not Yet Reviewed
$67.99
$56.50
ACDelco GM Genuine Parts power brake booster sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors detect pressure issues within the power brake booster, and they are GM-recommended replacements for your vehicle's original components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
Not Yet Reviewed
$99.99
ACDelco has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. The same signals are also used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM-recommended replacement sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the model that'll get you back up to speed!
( 4 )
$67.99
Summit Bucks
Delphi offers knock sensors for a wide variety of vehicles and engine types, including two-stroke, alternative fuel, diesel, and flexible fuel engines. The Delphi knock sensors offer several benefits including maximizing engine performance with all fuels, to help prevent engine damage from pre-ignition knocking, and ensuring accurate signals for optimal engine operation. They also help improve fuel efficiency and reduce emissions by adjusting ignition timing to avoid knocking combustion. Delphi's ever growing portfolio of high-quality vehicle sensors are backed by their stringent OE development and product validation methods. Select the sensor designed for your application.
Not Yet Reviewed
$56.99
—
$92.99
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$65.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
