Availability
Showing In Stock Items. Show All 37 Items.
AEM Electronics inline wideband UEGO controllers give all the benefits of the AEM Electronics wideband Air/Fuel gauges to those who do not require or want an additional gauge in the car. Perfect for datalogging, engine management systems or racing applications where a gauge is not desired. With simple wiring and easy installation, the weatherproof controller can be mounted anywhere in or outside the vehicle. The system features a Bosch sensor with an accuracy of .1 AFR, making it among the fastest and most accurate widebands available. Other features include: * Ideal AFR monitoring tool for EFI and carburated applications, and engine dynamometers * Does not oscillate AFR reading like narrow band sensors * No laptop required for monitoring! * 0-5V analog output included for use with data loggers and virtually any engine management system * Detects AFR sensor problems and outputs error values which can be used to deactivate feedback * Reads Gasoline AFR values from 8.5 to 18:1 AFR * Reads E85 AFR from values 5.7 to 12:1 AFR * Reads Ethanol AFR values from 5.2 to 11:1 AFR * Reads Methanol AFR values from 3.7 to 7.8:1 * Reads Lambda values from 0.58 to 1.22 AFR
( 6 )
$206.95
Timing is everything. Holley EFI cam sync sensor kits provide the components to set your engine's power curve for optimum performance. The complete kits include a sensor, stainless steel flying magnet target with high-temperature rare earth magnet, connector, pins, seal, and washers. The kits are also available without the flying magnet target and washer; plus, the components are also available individually. Eliminate ignition timing variations and mis-adjustments with Holley cam sync sensor kits. Features include: * 3-wire Hall effect camshaft sensor generates digital square-wave signal * Can work with internal and external cam drive systems (i.e. gear, chain, and belt drive systems with or without timing cover) * Can operate from 8 to 20 V * M12x1 threads for finer gap adjustability; approximately 1.5 in. length
Not Yet Reviewed
$184.95
—
$262.95
AEM Electronics Universal EMS Wideband UEGO sensor kits are designed for use with your AEM UEGO system. They include an oxygen sensor, connector plug, silicone wire seal, and wire terminals. Complete your UEGO installation with AEM Universal EMS Wideband UEGO sensor kits.
Not Yet Reviewed
$210.95
FuelTech cam sync bracket kits are a mounting bracket and magnetic kit designed only for use with a raised cam BBC when utilizing a camshaft belt drive and requires MSD ignition Hall Effect pickup (sold separately). The mounting hardware is included in the bracket kit for installation. Please note that some modifications may be required to correctly fit your application.
Not Yet Reviewed
$119.00
You don't have to be intimidated when changing over from a carbureted system to electronic fuel injection. These FAST EFI sensor kits provide you with everything you need to make the conversion. They include a manifold absolute pressure (MAP) sensor, coolant temperature sensor (CTS), air temperature sensor (ATS), and a throttle position sensor (TPS). The sensors are manufactured from quality materials, are available for both Ford and GM-style systems, and include a wide variety of applications. The kits work great on normally aspirated, as well as supercharged, turbocharged, 4, 6, and 8-cylinder engines. Now you can take the mystery out of EFI by using one of these complete FAST EFI sensor kits.
( 1 )
$137.95
—
$140.95
MSD replacement cam sync distributor Hall effect pickups are perfect for refreshing the timing pickup on your engine. These kits include an LED operation light that makes for quick indexing. Also included is the mating connector with terminals and seals for an all-around rebuild. Make sure your ignition is firing correctly when it supposed to be firing with high-quality replacement components like MSD cam sync distributor Hall effect pickups!
Not Yet Reviewed
$117.95
If you're running an electric choke Holley carburetor and are having trouble figuring out how to get that electronic overdrive transmission to work, Holley has the perfect solution for you. Holley TPS kits are designed for use on an electric choke-equipped Holley carburetor and are perfect for use with an electronic overdrive transmission, such as a 4L60E or 4L80E. They can also be used for data acquisition. These TPS kits are also designed to supply the needed TPS signal to an electronic transmission while retaining a carburetor. They drive directly off of the primary throttle shaft for accurate voltage readings. Holley TPS kits come complete with all the parts needed for a safe and easy installation.
( 36 )
$199.95
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$167.95
—
$206.95
Edelbrock mass airflow sensor kits are the perfect upgrades for any MAFS-equipped vehicle with performance upgrades that have elevated airflow above the range of the stock sensor. They feature a large, 95mm venturi housing that reduces airflow restriction and improves overall horsepower potential. The sensor is manufactured with an injection-molded housing for OEM-level precision with a modern, blade-style element for the latest in technology.
Not Yet Reviewed
$236.95
Whether your engine has forced induction or is naturally aspirated, Holley MAP sensors will keep your engine performing at its best. They're available in 1, 2, 3, 3.5, 5, and 7-bar models, with a variety of psi ranges. Choose the style preferred for your application.
( 17 )
$149.95
—
$172.95
Davies Craig electric water pump and fan controllers manage the operation of your chosen EWP by varying the speed of your pump in response to coolant temperature, while also managing control of your electric engine fan. These unique LCD controllers are enhanced with many features that help you set target temperatures to improve fuel efficiency, reduce heat soak, and increase power. Specs and features of Davies Craig digital controllers: * Black and white numerical screen * For 12 and 24 V electrical water pumps * Celsius or Fahrenheit display option * Select any set temperature range from 104 degrees F (40 degrees C) to 230 degrees F (110 degrees C) * Automatic fan cut-in temperature--once engine has reached 5.4 degrees F (3 degrees C) above the targeted (set) temperature * Set/targeted temperature memory * Override feature to assist bleeding EWP and fail-safe * Input voltage display * Compatible with billeted-style electric water pumps * Indicators: Temperature, power, EWP, test, fan, high/low temperature, voltage, above set temperature with alarm * Warning alarms: -- Plus 14 degrees F (10 degrees C) set/target temperature -- Under temperature 104 degrees F (40 degrees C) after 5 minutes -- Temperature sensor error -- Over or under voltage -- EWP error
( 4 )
$220.07
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$222.95
HalTech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
Injen X-Pedal Pro Black Edition throttle controllers are the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory for a completely new driving experience. You'll be amazed how different your vehicle feels after this quick and simple install. Modern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You'll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen X-Pedal Pro Black Edition throttle controllers let you adjust the pedal feel and ultimately the throttle response of your vehicle directly on-the-fly. The controllers require less than five minutes to install and deliver immediate, customized performance for your vehicle. Order the kit recommended for your vehicle. Features and benefits include: * Works with performance upgrades * Mode memory * No wires to cut or holes to drill; it's literally a plug-and-play unit * Lock the throttle * Built-in high-speed processor greatly improves throttle signal * Sport Mode: 9 levels, suitable for mountain roads and racing * ECO Mode: 7 levels, suitable for driving in city areas which can improve fuel economy * Anti-skid function allows your vehicle to launch on lower friction surfaces with ease * Launch Control/Drag Race Mode: Lets you reach max acceleration faster * DAC (Digital to Analog Convert
( 8 )
$243.75
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 55 )
$274.22
—
$289.75
Don't take chances with an old, questionable, or malfunctioning knock sensor that diminishes your vehicle's fuel economy, or worse, your engine. The engine knock sensors play a dual role in helping to monitor and protect your engine. Like other sensors, knock sensors monitor engine operation to optimize performance. In addition, knock sensors protect the engine against power-robbing and potentially destructive engine knock. Standard Motor Products replacement knock sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Performance.
( 12 )
$126.97
—
$143.97
K&N throttle control modules are designed to improve throttle response and acceleration, as well as pedal sensitivity without modifying factory ECU settings. These modules process input data from the gas pedal and bypasses the factory signal to your vehicle's ECU, sending a modified signal directly to the throttle body. This creates an increase in throttle responsiveness that will make your car feel like a whole new machine. Features and benefits: * Easy plug-and-play installation * No software required and can be tuned on the go * Sends a modified signal directly to the throttle body * Includes the module, wiring harness, adjustable dial, hardware, and instructions
Not Yet Reviewed
$280.09
FuelTech offers a variety of data acquisition components, including driveshaft sensors compatible with many advanced engine control and monitoring systems (ECU). They're available in different thread diameters. The sensors accurately measure driveshaft RPM to provide more accurate data for traction control.
Not Yet Reviewed
$179.00
Knock, knock... who's there? If it's your engine talking, you'd better listen! Beck/Arnley knock sensors are quality-made replacement parts that fit just like the originals. If you hear an unusual pinging in your car, especially at high speeds, then you may need to replace your knock sensor. Engine knock isn't a joke! Protect your engine and its components with replacement knock sensors from Beck/Arnley.
( 1 )
$105.99
—
$135.99
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 249 )
$225.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 13 )
$164.04
Fleece Performance coolant bypass components are available to service their coolant bypass kits. Depending on the application, these components will be stand-alone items or kits. Keep pushing the limits of diesel performance technology with the Fleece Performance coolant bypass components needed to get you back on the road.
Not Yet Reviewed
$114.99
You have an alternative choice for flex fuel sensors—Innovate ethanol content sensors! While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. Innovate content sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections. For all your high performance needs, choose Innovate.
( 1 )
$121.99
PRODRAG MAP sensors aim to provide the best data to keep you in the winner's circle. They're built and engineered for installations that produce substantial vibration, shock, and high cycling. Each sensor kit also comes with the mating connector in the push-to-seat configuration with a boot lip. General use applications include MAP sensor, back pressure sensor, and crankcase vacuum/pressure. Additional details: * 0.50 percent span accuracy * 316 stainless wetted diaphragm and process connection, black composite body * All welded pressure and sensor connections * 10 million+ cycles of durability * Reverse polarity and miswire protected * Lightweight * High EMI/RFI immunity rating * High performance ASIC based electronics * UL/cUL and CE approved * RoHS compliant * Vibration testing: Random vibration (20g) over temperature range (-40 to 125 degrees C) * Shock testing: 100 gs, 6 ms * Response time: <2 ms * Output: 0.5-4.5 V * Supply: 5 V * Range: -14.7 psi to +58 psi (0-72 psi absolute) * Thread size: 1/8 in. NPT * Connector Pinout: A – Ground, B – 5 V, C – Signal
Not Yet Reviewed
$164.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
