Availability
Showing In Stock Items. Show All 106 Items.
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 239 )
$194.96
Motorcraft MAP sensors are the best choice to restore the performance of your Ford, Lincoln, or Mercury vehicle. These manifold absolute pressure sensors are designed and built from premium materials to fit and function, just like the originals you are replacing. Genuine Motorcraft MAP sensors are also engineered with the current innovations and improvements, ensuring a smooth running engine with the most current technology.
( 8 )
$66.99
Motorcraft throttle position sensors replace your vehicle's worn or malfunctioning part. These replacement throttle position sensors relay throttle opening/closing information to the system's ECU.
( 15 )
$56.99
—
$91.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 99 )
$7.99
—
$17.99
Motorcraft replacement oxygen sensors are designed to meet Ford Motor Company requirements for durability and emission performance. They will work with the electronic systems in Ford, Lincoln, and Mercury vehicles.
( 5 )
$53.99
—
$66.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$36.99
—
$40.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$26.99
—
$34.99
Motorcraft camshaft position sensors will accurately determine the rotational speed of your camshaft. These high-quality, direct-fit OE replacements ensure lasting durability and reliable performance—even under extreme conditions. When you need replacements for your Ford, Lincoln, or Mercury, Motorcraft sensors offer the right fit and function at competitive pricing.
( 1 )
$35.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$28.99
—
$53.99
Motorcraft engine crankshaft position sensors will accurately determine the rotational speed of your crankshaft. These high-quality, direct-fit OE replacements ensure lasting durability and reliable performance--even under extreme conditions. When you need replacements for your Ford, Lincoln, or Mercury, Motorcraft sensors offer the right fit and function at competitive pricing.
( 1 )
$42.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 36 )
$37.99
—
$62.99
Motorcraft oil pressure switches will fix your jumpy gauge and prevent misreadings. Without the proper amount of oil, your engine will experience a lot of damage. If the oil light blinks or comes on, but the oil levels in the engine are fine, then a faulty oil pressure sensor may be to blame. Replace your faulty switch with genuine Motorcraft equipment, designed for durability and electrical performance.
( 12 )
$21.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$10.99
—
$30.99
Summit Bucks
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$22.99
—
$42.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$27.99
MotoRad coolant temperature sensors measure changes within the cooling system of a vehicle. This continuous measurement goes to the vehicle's powertrain control module (PCU) in order to help manage fuel injection, ignition timing, variable valve timing, and transmission shifting. MotoRad uses only the highest quality, OEM-approved premium materials and 100 percent factory resistance calibrated to ensure precision tolerances, resulting in highly accurate readings for optimal performance. A wide variety of MotoRad coolant temperature sensors ensure that most domestic and import applications are covered.
Not Yet Reviewed
$7.99
Motorcraft EGR pressure feedback sensors are engineered to provide original equipment performance and reliability. Sensors undergo comprehensive lab and real world testing in order to meet Ford's rigorous engineering standards. Each sensor is fully sealed and OE electrical connectors are used to provide an accurate fit. Finally, 22 performance, electrical, reliability and durability tests occur during the validation process before it reaches your vehicle. Motorcraft EGR pressure feedback sensors adhere to strict OE specs which minimizes repeat repairs and false check engine warnings.
Not Yet Reviewed
$72.99
Don't take chances with an old, questionable, or failing EGR valve position sensor that can leave you stranded. Standard Motor Products replacement EGR valve position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 2 )
$32.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$42.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$55.99
—
$151.99
Don't take chances with old, questionable, or faulty intake air temperature sensors that can send misleading information to you and your vehicle's computer. Standard Motor Products offers replacements designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These intake air temperature sensors are available for a wide range of makes and models, and some units also include a wiring harness. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 11 )
$10.99
Summit Bucks
Delphi air charge temperature sensors offer a durable OE replacement you can rely on! Built with the latest OE technology, these sensors are a one-piece design that eliminates internal connectors and failure points for more reliable service. Delphi temperature sensors have rugged plastic shells and thermistor pre-mold subassemblies or brass. Plus, they eliminate electrical interference. Get accurate readings--replace your original equipment with Delphi air charge temperature sensors.
( 2 )
$13.99
If you're experiencing temperature problems with your vehicle, then you may need Four Seasons coolant temperature sensors to eliminate any chance of further issues. Four Seasons coolant temperature sensors are high-quality, direct-fit OE replacements.
( 2 )
$16.99
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$29.99
—
$138.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
