Availability
Summit Bucks
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 66 )
$9.99
—
$33.99
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
Summit Bucks
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 19 )
$46.99
—
$135.99
Summit Bucks
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 21 )
$33.99
—
$82.99
Summit Bucks
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 21 )
$58.99
—
$224.99
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
Summit Bucks
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 7 )
$100.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$37.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$20.99
—
$81.99
Summit Bucks
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 101 )
$30.99
—
$65.99
Summit Bucks
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 102 )
$9.99
—
$20.99
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$36.99
—
$59.99
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 236 )
$179.96
—
$322.46
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 37 )
$319.00
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 98 )
$4.99
—
$29.99
Summit Bucks
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 7 )
$74.99
—
$83.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 35 )
$20.99
—
$77.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$32.99
—
$66.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$7.99
—
$64.97
Summit Bucks
ACDelco GM Genuine Parts vehicle speed sensors report vehicle speed to the instrument panel and engine control module, and are GM-recommended replacements for your vehicle's original components. The sensors signals are used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM Genuine Parts vehicle speed sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$21.99
—
$68.99
OER coolant temperature sending units are direct replacements that will restore reliable readings. Offering a proper fit for a hassle-free install, these sensors will efficiently relay electrical signals to your gauges to display accurate engine coolant temperature. OER coolant temperature sending units will ensure your gauge functions properly.
( 5 )
$31.99
—
$38.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$41.99
—
$86.99
Dorman offers cylinder deactivation solenoids, a.k.a. CD manifolds, that have been rigorously engineered to directly replace the original equipment on select vehicles. This design features multiple upgrades to help ensure performance and reliability—such as an increased sealing surface interface, a redesigned rod sub-assembly, and superior quality O-rings and gasket. Durably constructed, the solenoid rod is hardened for improved wear resistance and to help maintain tighter tolerances. Internal bore step incorporates a radius edge to prevent valve sticking for reliable operation.
( 1 )
$213.99
Lingenfelter Performance Engineering mass airflow sensors are large-diameter and low-restriction. These assemblies will provide accurate airflow--even at high power levels. Recommended for supercharged, turbocharged, and other high output engine applications, these 100mm tube MAFs are precision CNC-machined from aluminum, and then anodized black for durability and appearance. Replace your GM frequency-type sensor with Lingenfelter mass airflow sensors.
( 1 )
$332.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
