Availability
Showing In Stock Items. Show All 92 Items.
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$52.99
—
$106.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$73.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
—
$58.99
Summit oxygen sensors will keep your engine running reliably by properly monitoring the amount of oxygen in your exhaust stream. Our sensors are manufactured to the highest quality standards.
( 1 )
$85.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$54.99
—
$107.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$90.99
—
$93.99
Cardone new mass airflow sensors meet or exceed OE specifications. These new MAFs are built with Cardone engineered technology. They precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. And every component is rated to handle a broad range of temperatures and altitudes. Select new parts that offer quality and value--choose Cardone new mass airflow sensors.
( 5 )
$100.99
—
$107.99
Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. By replacing faulty sensors, you can prevent further damage to your vehicle's air suspension system. Arnott suspension ride height sensors are manufactured from quality components to restore the vehicle's ability to respond to road conditions, and increase comfort and dynamic capability for a premium ride. Their aftermarket ride height sensors level your vehicle by measuring the varying distances between the road and the vehicles chassis. The sensors provide your vehicle's Electronic Control Unit (ECU) with the information and send a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Choose the sensor designed for your vehicle.
Not Yet Reviewed
$64.88
—
$93.66
Dorman exhaust gas temperature sensors make replacing seized or damaged sensors a breeze. These EGT sensors are direct replacements and come with a bung repair kit just in case the bung is damaged during removal. This is a cost effective fix, instead of having to replace the entire exhaust pipe. They feature quality engineering and are backed by decades of automotive experience.
Not Yet Reviewed
$60.99
—
$98.99
PowerStop has a reputation for precision and adherence to the strictest OEM standards. Extending those standards, PowerStop's electronic brake wear sensors are designed to meet the same form, fit, and function as the original OEM part. Brake wear sensors wear down with the pads and illuminate the brake pad wear indicator light/warning. When that happens, it's time to replace the brake pads as well as the sensors. PowerStop electronic brake wear sensors are designed to withstand high-temperatures, assure excellent electrode conductivity, and they will continue to work after thousands of miles, providing the safety and performance drivers count on.
( 5 )
$66.66
—
$98.75
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$51.99
—
$68.99
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$52.99
—
$103.99
Is your check engine light on? Is your vehicle hesitating, or even stalling? You may need of a new mass airflow sensor. Bosch mass airflow sensors were developed to replace your OEM components. They're manufactured to strict standards and made of high-quality materials.
( 2 )
$93.99
—
$107.99
Hella mass airflow sensors will correctly calculate the intake air mass in your internal combustion engine. The efficient running of your engine depends on several things, and these sensors are one of those important parts. They are quality-built, direct replacements for your malfunctioning or damaged mass airflow sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$103.99
Summit Bucks
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$52.99
—
$110.99
Summit Bucks
The Delphi EGT temperature sensors offer a combination of performance optimization, component protection, and reliability, making them a crucial part of modern vehicle management systems. They provide precise temperature monitoring, enabling the engine control unit (ECU) to optimize engine operation and protect critical components from overheating. Their fast response time, robust design, and wide temperature range ensure reliable performance in various driving conditions. In diesel engines, EGT sensors monitor the temperature of the DPF, ensuring proper regeneration cycles to maintain efficiency and prevent damage. All Delphi sensors are tested and calibrated to OE standards, ensuring accurate readings for reliable performance. Select the Delphi EGT temperature sensor designed for your application needs.
Not Yet Reviewed
$54.99
—
$74.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$55.99
—
$97.99
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$54.99
—
$97.99
Hella crankshaft position sensors will accurately measure speed and position of your crankshaft and provide the data to engine control. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead. Sensors are available for applications from 1992 and up.
Not Yet Reviewed
$52.99
—
$81.99
Hella ABS speed sensors maintain safe, smooth operation for your anti-lock braking system, traction control, and stability control. Hella sensors are high-quality replacements with availability for many European manufacturers. Wheel speed sensor faults can cause other safety systems to fail. Keep your braking performance optimal with Hella ABS speed sensors.
( 1 )
$58.99
—
$103.99
Summit Bucks
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$50.99
—
$127.99
Summit Bucks
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$55.99
—
$69.99
Summit Bucks
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$72.99
—
$100.99
The accelerator pedal sensor measures the position of the pedal and transmits this data to the control unit for setting the throttle elements or to the injection system. The advantage of this approach is that these parameters can be used to prevent wear on the clutch and drivetrain and to reduce CO2 emissions. Hella accelerator pedal sensors maintain safe, smooth operation for your vehicle, and they are high-quality replacements with availability for many European manufacturers. Available for automatic and manual transmissions; choose the pedal sensor needed for your vehicle.
Not Yet Reviewed
$70.99
—
$106.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
